Open hemangjoshi37a opened 2 years ago
Usb stick need to be fat32 not ntfs otherwise its not detected
Ok thanks but I formatted to FAT32 but still does not show the img file on my USB drive.
https://hjlabs.in/ On Thu, 12 May 2022 at 16:30, symbios24 @.***> wrote:
Usb stick need to be fat32 not ntfs otherwise iss not detected
— Reply to this email directly, view it on GitHub https://github.com/maxnet/berryboot/issues/737#issuecomment-1124852421, or unsubscribe https://github.com/notifications/unsubscribe-auth/AC6RPGK26HSZRAHRSAY6ANTVJTQENANCNFSM5VW7AMJQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Regards, Hemang Joshi, Email : @.*** mobile : +919409077371 hjlabs.in
The file needs to be like that eg: raspbian.img Not raspbian.img.gz
Hold down your left mouse button over the “Add OS” button and select “copy OS from USB stick”, to install an operating system saved on USB stick.
The file needs to be like that eg: raspbian.img Not raspbian.img.gz
Hold down your left mouse button over the “Add OS” button and select “copy OS from USB stick”, to install an operating system saved on USB stick.
yes it is img file not gz file. hjlabs.in
hello @hemangjoshi37a did you ever find the solution to this? I am having the same issue.
@amathews84 Yes actually eventualy I found the solution but I dont remember because of it is a long time ago. I think I formatted the USB with FAT32 or something or downloaded new image. I am sorry I cant remember it now.
@amathews84 If in the future I remember what I did then I will comment here.
For those that waiting for an update that never comes,i managed to partial update berryboot to work at 1800 mhz with pi4, rev1.2 and up with the arm_boost setting,by default it does not work. This setting works with every OS old or new.
I realized that I did not extract the image before trying to load it into berry boot. After doing so it loaded fine.
Berryboot Does not show my image from usb stick. I have my berryboot image on the usb stick and it does not detect it. I want to add it to the sd card.
Please help. https://hjlabs.in/