search

maxritter / diy-thermocam

A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware
http://www.diy-thermocam.net
GNU General Public License v3.0
1.1k stars 174 forks source link

Broken links on Github doc #28

Closed mapperfr closed 6 years ago

mapperfr commented 6 years ago

The link to the firmware update guide (1) on the "Firmware Updater" page (2) is broken, and I can't find the correct link to fix it.

(1) https://github.com/maxritter/DIY-Thermocam/blob/master/Documents/FirmwareUpdate_06.pdf (2) https://github.com/maxritter/DIY-Thermocam/tree/master/Software/Firmware%20Updater

mapperfr commented 6 years ago

And so is this link (1) found on the main page (2).

(1) https://github.com/maxritter/DIY-Thermocam/tree/master/Firmware/Releases (2) https://github.com/maxritter/DIY-Thermocam

mapperfr commented 6 years ago

I found the correct link and fixed the above, see pull requests #29 and #30.