search

maxritter / diy-thermocam

A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware
http://www.diy-thermocam.net
GNU General Public License v3.0
1.1k stars 174 forks source link

Microcontroller teensey 3.5 is not detected on my pc #32

Closed nacerazel closed 6 years ago

nacerazel commented 6 years ago

Hello everyone, i m already finished the realisation of the thermal camera, the problem that stops me is non detection of teensy, I installed the drivers needed in "device firmware" but the probleme still exist, no port is detected on arduino ide when i put on my teensy, please i need help

maxritter commented 6 years ago

Were you able to flash the device firmware over the official firmware updater or the Teensy loader? Only afterwards, the device will be detected as a virtual serial port on the PC.

nacerazel commented 6 years ago

thank you for your information, now i put it on my camera and it shows me a screen message " this is you first time setup...." they tell me to touch screen but it doesnt respond, a friend tell me that i have to upload source code for the screen but i dont have any idea. Thanks

maxritter commented 6 years ago

Closed, because the author opened another issue related to the touchscreen.