"Trying to start..." on boot menu

maxritter / diy-thermocam

A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware

http://www.diy-thermocam.net

GNU General Public License v3.0

1.1k stars 174 forks source link

"Trying to start..." on boot menu #40

Closed Loremwriter closed 3 years ago

Loremwriter commented 6 years ago

Hi,

i ordered a new display, which is resistive instead of capacitive. At first, everything was fine. I got to a menu to set up the time and date, but then after restart my camera get stuck on the boot menu. Here is the current screen. Every time I start up, it get stuck at this screen. 2018-06-01 15 57 45

Does anyone has an idea, how to fix it?

I already flashed a new firmware to the camera (Version 2.46 from 17.04.2018).

Best regards

maxritter commented 6 years ago

There seems to be an issue with the I2C bus, because all devices using it are shown as "Failed". So maybe there is a short somewhere or the 4.7k pullup resistors are not connected properly. Resoldering the affected connections also helps sometimes :)