Last Time Buy Date 09/30/2019 LEPTON BREAKOUT BOARD EOL or Obsolete Part!!

[Meins321]

@maxritter Got an E-Mail from Digikey:

Part Affected

Manufacturer | FLIR LEPTON Description | LEPTON BREAKOUT BOARD PCB ASSY Manufacturer Part Number | 250-0587-00 Digi-Key Part Number | 250-0587-00-ND

Link Status | End Of Life Last Time Buy Date | 09/30/2019 Substitutes | Please click here

[blackdot]

Hello, this substitute has different pinout. Did anyone managed to make everything work?

[jonaswinterhalder]

Hi blackdot, im working on it. I just received the Breakout Board v2.

[VoodooBane]

Hi blackdot, im working on it. I just received the Breakout Board v2.

Any update on this? Would this [https://store.groupgets.com/products/purethermal-breakout-board] work as a drop in replacement for 250-0587-00?

Let me know I ordered the groupget "PureThermal Breakout Board" just in case

[jonaswinterhalder]

Hi blackdot, im working on it. I just received the Breakout Board v2.

Any update on this? Would this [https://store.groupgets.com/products/purethermal-breakout-board] work as a drop in replacement for 250-0587-00?

Let me know I ordered the groupget "PureThermal Breakout Board" just in case

Unfortunately I got a broken camera and could not continue testing. The camera is currently on its way to America. I'm sorry for the bad news.

[ghost]

Does anyone already have new information about the Breakout Board V2?

[mdjonni]

Does anyone already have new information about the Breakout Board V2?

Anyone got it working with the Breakout Board V2? I tried to setup mine matching all the pin outs. Whenever I go for live view, the screen just says "Please wait.. ". I'm using Lepton 2.5.

[VoodooBane]

I was able to get my Leptop 3.0 to work with https://store.groupgets.com/products/purethermal-breakout-board You need to bend the pins at an angle and then remove the Vsync and EN Pins "This new board has two new pins, VSync and Enable" I used 3mm double-sided tape on the back of the board then soldering the pins together.

[samirakle]

I was able to get my Leptop 3.0 to work with https://store.groupgets.com/products/purethermal-breakout-board You need to bend the pins at an angle and then remove the Vsync and EN Pins "This new board has two new pins, VSync and Enable" I used 3mm double-sided tape on the back of the board then soldering the pins together.

@VoodooBane

Hi there. Do you know if that Pure Thermal breakout board will work on the Lepton 3.5? Also, for clarification, which pins did you solder together exactly? I'm assuming it was the 2 extra pins (VSYNC and EN)? If so, what was the reason for soldering them together versus just cutting the pins off and leaving them alone? Thanks.

[VoodooBane]

That was my mistake I went all out as well and got the leptop 3.5. That is correct I the 2 pins extra are VSYNC and E. just desolder those ones of. yes been the pin and solder them. I will be back with a photo for you! and ill link the tap I used.

On Thu, Jul 2, 2020 at 11:31 AM samirakle notifications@github.com wrote:

I was able to get my Leptop 3.0 to work with https://store.groupgets.com/products/purethermal-breakout-board You need to bend the pins at an angle and then remove the Vsync and EN Pins "This new board has two new pins, VSync and Enable" I used 3mm double-sided tape on the back of the board then soldering the pins together.

Hi there. Do you know if that Pure Thermal breakout board will work on the Lepton 3.5? Also, for clarification, which pins did you solder together exactly? I'm assuming it was the 2 extra pins (VSYNC and EN)? Thanks.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/maxritter/DIY-Thermocam/issues/75#issuecomment-653075432, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHPLGJDEMT2EKRI5ZQNQQ6LRZSR3XANCNFSM4IQ6J6MA .

[samirakle]

@VoodooBane Okay thanks. Yes, a picture would be great to see. I'm currently working on this build but I was provided the FLIR breakout board V2 which has 2 rows of pins (total of 20 pins). The Pure Thermal breakout board should be on its way sometime soon. 👍🏼

[VoodooBane]

The solder job:

And here is the Tape I used it on the battery and the pure thermal board to keep it in place soldering (I did cover the PCB and the back of the pure thermal board with Kapton take)

I hope this helps! I wish we could utilize the Vsync pin... The screen lags when moving :(

[VoodooBane]

I forgot to mention you. @samirakle

On Thu, Jul 2, 2020 at 4:40 PM samirakle notifications@github.com wrote:

@VoodooBane https://github.com/VoodooBane Okay thanks. Yes, a picture would be great to see. I'm currently working on this build but I was provided the FLIR breakout board V2 which has 2 rows of pins (total of 20 pins). The Pure Thermal breakout board should be on its way sometime soon. 👍🏼

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/maxritter/DIY-Thermocam/issues/75#issuecomment-653211023, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHPLGJHUX5U2WAN3HXT6DNLRZTWFLANCNFSM4IQ6J6MA .

[samirakle]

@VoodooBane Thank you so much for posting a pic! I'll let you know if I have any issues.

[Ailsamly]

@VoodooBane Thank you so much for posting a pic! I'll let you know if I have any issues.

@samirakle @VoodooBane Hi friends, I am a new learner from Germany and I am also planning to build a small thermal camera and integrate to a mobile robot, if possible, can we get in touch with each other and have a discussion for some problems. I would be really appreciated if I can get your experienced suggestions in my initial period. Thank you very much! My email address is whumly1223@gmail.com. You are welcome to contact me! Best, Leyuan