search

maxwellhadley / node-red-contrib-rfxcom

node-RED nodes to access an RFXtrx433 transceiver
BSD 2-Clause "Simplified" License
22 stars 13 forks source link

Is it possible to get readings from a BBQ thermometer #15

Closed Bjsulla closed 7 years ago

Bjsulla commented 7 years ago

I have an Maverick ET-732 BBQ thermometer that I am trying to get some readings from with no success. I have tried every node possible in the node-red-contrib-rfxcom and the RFXtrx433E is recognized and presenting the firmware version under the node but I get no readouts.

Sample reading from the RFXmngr: Packettype = BBQ subtype = BBQ1 - Maverick ET-732 Sequence nbr = 22 ID = 6FE1 decimal:28641 Sensor1 temp = 23 °C Sensor2 temp = 26 °C Signal level = 7 -64dBm Battery = OK

Is it possible to get this working or is it functionality not yet present? Regards Bjorn

maxwellhadley commented 7 years ago

Currently the BBQ temperature sensor packet type is not supported. It should be simple enough to add though, I'll put it in the queue!

Bjsulla commented 7 years ago

Great! Thank you.

maxwellhadley commented 7 years ago

New version 1.3.0 now published. I've added MAVERICK as a new subtype to rfx-sensor-in: it reports both the meat & fire temperatures. As I don't have a thermometer to test with, I've just used the example in the RFXCOM SDK documentation to test against. Please let me know if you find any problems, and re-open the issue if necessary.