search

mc0110 / inetbox2mqtt

communicate over mqtt protocol to simulate a truma inetbox
MIT License
86 stars 19 forks source link

Truma switches automatically on after HA restart #38

Closed CzarofAK closed 1 year ago

CzarofAK commented 1 year ago

My HA is switching on the Room Heater after rebooting. I have also troubles to keep the truma switched off. Somehow it starts automatically!

CzarofAK commented 1 year ago

Screenshot_20230328-213639

mc0110 commented 1 year ago

I need more info about our setup! The HA automation is correct function only with Celsius degrees

CzarofAK commented 1 year ago

Yes, of course, everything you need. i have copied your truma.ii and yaml. the only thing changed is, the min temp for a test (to switch it off via target room temperature setting. i can switch it off on the truma panel.

mc0110 commented 1 year ago

Sorry, I don't understand the problem.

If I understand correctly, you are using my ESP module and can also control the Truma via MQTT. The HA scripts have been tested many times and run perfectly in many installations. If you have changed something, you have probably made a mistake.

CzarofAK commented 1 year ago

I use your code straight out the box. I have made changes to investigate the fault.

It seems like that the home assistant cant either send the data correctly to the esp or the esp cant send the data to the bus.

mc0110 commented 1 year ago

I don't understand what you mean?

mc0110 commented 1 year ago

The best thing to do is to reinstall ESP and HA Yaml.

mc0110 commented 1 year ago

Are there any news from your side?