search

mcauser / Fritzing-Part-WiFi-Witty-Gizwits-ESP-12F

Fritzing Part: WiFi Witty Gizwits ESP-12F
19 stars 5 forks source link

Drills too large? #1

Open eduperez opened 6 years ago

eduperez commented 6 years ago

I have included your part in one of my circuits, and everything seems to be working correctly. But then I export the circuit as a gerber and upload it at oshpark.com, or I upload the fzz file to aisler.net, and then on their simulation all I see are the holes, there is no cooper around them. I think those drill holes are too large.

mcauser commented 6 years ago

I've never tried exporting this part for fabrication.

If you have a similar part with the correct size drill holes, can you send that across and I'll patch the pcb.svg.

eduperez commented 6 years ago

Thanks for your support!

I am not completely sure there is a problem with the holes, but I have tried to compare your part with other similar parts, and I think there is something wrong on the SVG file for the PCB; but I cannot point exactly what is wrong, just noticed that there are large differences on how are the pads defined.

For example, see the attached file: ESP8266-01 WiFi Module.zip