terrillmoore
commented
2 years ago Sorry you're having trouble.
Can you be more specific? The LMIC works well in the India region, MCCI India uses it that way all the time....
Best regards, --Terry
Closed UdayChaduvula closed 2 years ago
terrillmoore
commented
2 years ago Sorry you're having trouble.
Can you be more specific? The LMIC works well in the India region, MCCI India uses it that way all the time....
Best regards, --Terry
UdayChaduvula
commented
2 years ago Hi,
I want to create a LoRaWAN node and it should be compatible with India lora frequency (866 MHz). I am using the SX1272 module. Where can I enable India Frequency in the code? In the configuration file I found only AU and US and also in the LoRaBase file. Where can I enable LoRa frequency in the code?
On Sat, 2 Jul, 2022, 20:37 Terry Moore, @.***> wrote:
Sorry you're having trouble.
Can you be more specific? The LMIC works well in the India region, MCCI India uses it that way all the time....
Best regards, --Terry
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1172913400, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFNJKL5KL4T42ZS2YSLVSBLKRANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
dhineshkumarmcci
commented
2 years ago Hi Uday,
In the configuration file I found only AU and US and also in the LoRaBase file.
Please find the permalink for India band in lorabase.h
UdayChaduvula
commented
2 years ago Hi Mcci-Catena/Arduino-Lmic,
Sorry for the issue, I have used the IBM LMIC framework library for my project, I thought it was the same. Apologies from my side.
I have found one more issue in the in lmic_project_config.h, SX272 module is missing in the file. Please find the paralink below.
On Mon, Jul 4, 2022 at 2:55 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday,
In the configuration file I found only AU and US and also in the LoRaBase file.
- Can you please point out to the file and line number?
- Could be helpful if you can share the permalink (which redirects to particular line / set of lines in a file).
Please find the permalink for India band in lorabase.h
- https://github.com/mcci-catena/arduino-lmic/blob/master/src/lmic/lorabase.h#L377-L420
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1173578366, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFLOPHCAB6EUOZDFZK3VSKUX5ANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
UdayChaduvula
commented
2 years ago Hi Mcci-Catena/Arduino-Lmic,
My LoRa board SX1272 MBED Shield is missing in the lmic_hal_boards.h file. Please find the paralink below: https://github.com/mcci-catena/arduino-lmic/blob/8d378ea410887d3fb08ea2c9acce95cc4c047788/src/arduino_lmic_hal_boards.h#L43
On Mon, Jul 4, 2022 at 4:39 PM Uday Chaduvula @.***> wrote:
Hi Mcci-Catena/Arduino-Lmic,
Sorry for the issue, I have used the IBM LMIC framework library for my project, I thought it was the same. Apologies from my side.
I have found one more issue in the in lmic_project_config.h, SX272 module is missing in the file. Please find the paralink below.
On Mon, Jul 4, 2022 at 2:55 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday,
In the configuration file I found only AU and US and also in the LoRaBase file.
- Can you please point out to the file and line number?
- Could be helpful if you can share the permalink (which redirects to particular line / set of lines in a file).
Please find the permalink for India band in lorabase.h
- https://github.com/mcci-catena/arduino-lmic/blob/master/src/lmic/lorabase.h#L377-L420
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1173578366, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFLOPHCAB6EUOZDFZK3VSKUX5ANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
dhineshkumarmcci
commented
2 years ago Hi Mcci-Catena/Arduino-Lmic, Sorry for the issue, I have used the IBM LMIC framework library for my project, I thought it was the same. Apologies from my side. I have found one more issue in the in lmic_project_config.h, SX272 module is missing in the file. Please find the paralink below. https://github.com/mcci-catena/arduino-lmic/blob/8d378ea410887d3fb08ea2c9acce95cc4c047788/project_config/lmic_project_config.h#L9
You can edit line 9 in the file lmic_project_config.h with sx1272 instead of sx1276.
define CFG_sx1272_radio 1
UdayChaduvula
commented
2 years ago Hi Dinesh,
I am awaiting your response.
On Mon, Jul 4, 2022 at 4:46 PM Uday Chaduvula @.***> wrote:
Hi Mcci-Catena/Arduino-Lmic,
My LoRa board SX1272 MBED Shield is missing in the lmic_hal_boards.h file. Please find the paralink below:
On Mon, Jul 4, 2022 at 4:39 PM Uday Chaduvula @.***> wrote:
Hi Mcci-Catena/Arduino-Lmic,
Sorry for the issue, I have used the IBM LMIC framework library for my project, I thought it was the same. Apologies from my side.
I have found one more issue in the in lmic_project_config.h, SX272 module is missing in the file. Please find the paralink below.
On Mon, Jul 4, 2022 at 2:55 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday,
In the configuration file I found only AU and US and also in the LoRaBase file.
- Can you please point out to the file and line number?
- Could be helpful if you can share the permalink (which redirects to particular line / set of lines in a file).
Please find the permalink for India band in lorabase.h
- https://github.com/mcci-catena/arduino-lmic/blob/master/src/lmic/lorabase.h#L377-L420
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1173578366, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFLOPHCAB6EUOZDFZK3VSKUX5ANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
dhineshkumarmcci
commented
2 years ago Hi Mcci-Catena/Arduino-Lmic, My LoRa board SX1272 MBED Shield is missing in the lmic_hal_boards.h file. Please find the paralink below: https://github.com/mcci-catena/arduino-lmic/blob/8d378ea410887d3fb08ea2c9acce95cc4c047788/src/arduino_lmic_hal_boards.h#L43
Please find the README link to add your board manually.
UdayChaduvula
commented
2 years ago Thanks for the update Dhinesh Kumar,
How to generate DEV EUI, APP EUI and APP KEY ? Could you please support me on this ?
On Mon, Jul 4, 2022 at 6:03 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Mcci-Catena/Arduino-Lmic, My LoRa board SX1272 MBED Shield is missing in the lmic_hal_boards.h file. Please find the paralink below: https://github.com/mcci-catena/arduino-lmic/blob/8d378ea410887d3fb08ea2c9acce95cc4c047788/src/arduino_lmic_hal_boards.h#L43
Please find the README link to add your board manually.
- https://github.com/mcci-catena/arduino-lmic/tree/master#manual-configuration
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1173768130, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFJALFKLPH3C3QFAC2DVSLK3LANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
dhineshkumarmcci
commented
2 years ago Hi Uday, you should be able to generate DevEUI, AppEUI and AppKey from your desired network provider.
UdayChaduvula
commented
2 years ago Hi Dhanush,
Greetings of the day!
How can I change the Spreading factor in the code?
On Tue, Jul 5, 2022 at 7:12 PM Uday Chaduvula @.***> wrote:
Hi Dhanush,
I want to send the payload in ABP mode when the device receives the input in serial. How Can I do it? Could you help me in this regard?
I am able to do it in the scheduled timer which is already present in the code. Please find the Paralink below
https://github.com/mcci-catena/arduino-lmic/blob/8d378ea410887d3fb08ea2c9acce95cc4c047788/examples/ttn-abp/ttn-abp.ino#L140 https://github.com/mcci-catena/arduino-lmic/blob/8d378ea410887d3fb08ea2c9acce95cc4c047788/examples/ttn-abp/ttn-abp.ino#L140
On Mon, Jul 4, 2022 at 6:49 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday, you should be able to generate DevEUI, AppEUI and AppKey from your desired network provider.
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1173813941, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFI2BCYXQERQ6JFOG7LVSLQGDANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
dhineshkumarmcci
commented
2 years ago Hi Uday, you cal use the below API to change SF.
Please find the list of Spread Factor definitions over here
For example - LMIC_setDrTxpow(DR_SF12, 30);
UdayChaduvula
commented
2 years ago Hi Dinesh,
How can I assign my Own DEV ADDR in the OTAA Code, I don't want to generate it from the LoRaWan Gateway.
On Fri, Jul 15, 2022 at 4:16 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday, you cal use the below API to change SF.
Please find the list of Spread Factor definitions over here
For example - LMIC_setDrTxpow(DR_SF12, 30);
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1185423189, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFK4JCJ22EZXZNJECILVUE6RPANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
dhineshkumarmcci
commented
2 years ago Hi Uday, please refer to the API below for more details:
Also please do refer to the API description just above the definition.
UdayChaduvula
commented
2 years ago Hi Mcci-Catena/Arduino-Lmic,
Greetings of the day!
How can I mention the Indian region in OTAA code? Or the code automatically identifies itself from the library?
On Mon, Jul 18, 2022 at 3:14 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday, please refer to the API below for more details:
Also please do refer to the API description just above the definition.
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1186988946, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFO6MLOMOWBMZ2Q77C3VUURQXANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
UdayChaduvula
commented
2 years ago Hi,
Can anyone please respond to the trailing mail ?
On Fri, Sep 23, 2022 at 8:23 PM Uday Chaduvula @.***> wrote:
Hi Mcci-Catena/Arduino-Lmic,
Greetings of the day!
How can I mention the Indian region in OTAA code? Or the code automatically identifies itself from the library?
On Mon, Jul 18, 2022 at 3:14 PM Dhinesh Kumar Pitchai < @.***> wrote:
Hi Uday, please refer to the API below for more details:
Also please do refer to the API description just above the definition.
— Reply to this email directly, view it on GitHub https://github.com/mcci-catena/arduino-lmic/issues/883#issuecomment-1186988946, or unsubscribe https://github.com/notifications/unsubscribe-auth/AZLEHFO6MLOMOWBMZ2Q77C3VUURQXANCNFSM52O74CKQ . You are receiving this because you authored the thread.Message ID: @.***>
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
-- Thanks with Regards!
Uday Kumar Chaduvula Sr. Engineer - Embedded Antar IoT Pvt. Ltd Visakhapatnam
terrillmoore
commented
2 years ago Please check the instructions in the README.
I have found that India lora frequency setting are missing in the LoRaBase.h file.