issues
search
mcci-catena
/
mcci-catena-4430
Library for MCCI Catena 4430 PIR/storage Feather wing
MIT License
1
stars
3
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Calibrating the PCF8523 RTC
#38
dhineshkumarmcci
opened
1 year ago
0
remove example and decoders
#37
dhineshkumarmcci
opened
2 years ago
0
set RTC with network time and added flag to know if time is synchronized
#36
dhineshkumarmcci
closed
2 years ago
0
fix #34: use correct error message
#35
dhineshkumarmcci
closed
2 years ago
1
Incorrect error message "** no SD card and not provisioned!"
#34
terrillmoore
closed
2 years ago
1
Add a few additional file management commands
#33
terrillmoore
opened
2 years ago
0
Fix #31: prepare for library v0.5.2 release
#32
terrillmoore
closed
2 years ago
0
Update version to 0.5.2 for release
#31
terrillmoore
closed
2 years ago
0
Add CO2 (SCD30), O2 (DFRobotic), NH3 (DFRobotic) support
#30
terrillmoore
opened
2 years ago
0
Need a flag to say (in uplinks) that the time is synchronized
#29
terrillmoore
opened
2 years ago
1
Uplink Version #
#28
terrillmoore
opened
2 years ago
0
Find better approach for double reset
#27
terrillmoore
opened
2 years ago
0
Swap red and blue LEDs
#26
terrillmoore
opened
2 years ago
0
fix #24: set threshold value to turn OFF ststus LED
#25
dhineshkumarmcci
closed
3 years ago
0
noise with light sensor in darkness
#24
dhineshkumarmcci
closed
3 years ago
0
Bootloader fails to load FW BIN file
#23
dhineshkumarmcci
closed
3 years ago
0
migrate device from TTN V2 to TTN V3
#22
dhineshkumarmcci
closed
3 years ago
1
Migrate to TTN V3 - update AppEUI in FRAM and rejoin
#21
dhineshkumarmcci
closed
3 years ago
0
Update firmware from SD Card; release 0.5.0
#20
terrillmoore
closed
3 years ago
0
Add firmware update via SD card
#19
terrillmoore
closed
3 years ago
0
Release for v0.4.0
#18
dhineshkumarmcci
closed
3 years ago
0
prepare for release v0.4.0
#17
dhineshkumarmcci
closed
3 years ago
0
update the application sketch to perform 24-bit mode light sensing
#16
dhineshkumarmcci
closed
3 years ago
1
Fix #13: add yaml output from test vector generator
#15
terrillmoore
closed
3 years ago
0
Fix #12: set Vbus not Vsys from bit 2 in ttn decoder format 22
#14
terrillmoore
closed
3 years ago
0
Add yaml output for test vector generator
#13
terrillmoore
closed
3 years ago
0
TTN decoder sets wrong value for bit 2 -- should be Vbus, but sets Vsys (twice)
#12
terrillmoore
closed
3 years ago
1
Fix #9: added new features and 24-bit light measurement
#11
dhineshkumarmcci
closed
3 years ago
0
Extra header column in SD logfile
#10
KravitzLab
opened
4 years ago
4
Use LPTIM to put device in deep sleep between each PIR sampling
#9
dhineshkumarmcci
closed
3 years ago
0
Fix #7: prepare release v0.3.4
#8
terrillmoore
closed
4 years ago
0
Create release v0.3.4
#7
terrillmoore
closed
4 years ago
0
Fix SD card power down.
#6
terrillmoore
closed
4 years ago
0
Add variant for remote temperature probe on A0
#5
terrillmoore
opened
4 years ago
0
SD card generally doesn't come up
#4
terrillmoore
closed
4 years ago
1
Fix #2: clean up header line on SD card
#3
terrillmoore
closed
4 years ago
0
Data file has embedded \0 after header line.
#2
terrillmoore
closed
4 years ago
0
Catena4430_Sensor example sketch transmit VBAT value in VBUS field
#1
svelmurugan92
closed
5 years ago
1