Closed petermccloud closed 3 years ago
Issues found during testing
Power Management Status - USING_BAT and USING_ENG appear to be switched? Verified that the correct pins are being used from the schematic.
Battery 2 Voltage - When both batteries are disconnected, but power is applied to VRAW, battery 2 voltage appears to have a battery?
BAT_EN=1 and ENG_EN=1
BAT_EN=1 and ENG_EN=0
Other Observations
Closed -- all observed issues have been confirmed to be caused by fabrication issues -- Revision D has updated to accommodate this
Issues found during testing
Power Management Status - USING_BAT and USING_ENG appear to be switched? Verified that the correct pins are being used from the schematic.
Battery 2 Voltage - When both batteries are disconnected, but power is applied to VRAW, battery 2 voltage appears to have a battery?
BAT_EN=1 and ENG_EN=1
BAT_EN=1 and ENG_EN=0
Other Observations