Closed garyw7jzu closed 6 years ago
Same issue, all the reflectors say - REFLECTOR DOES NOT EXIST Buster is totally unusable, however you still still go Repeater direct, but doesn't allow you to be on reflectors.
This morning Buster has returned to its usual functioning.
Thanks Gary W7JZU
Buster gets its list of DPlus reflectors from the DPlus Authentication Service at opendstar.org. The site was refusing connection during my testing, so it appears as though there was an Internet outage at the site.
Thank you for the information
Gary W7JZU
Sent from my iPhone
On May 15, 2018, at 12:40 PM, Annaliese McDermond notifications@github.com wrote:
Buster gets its list of DPlus reflectors from the DPlus Authentication Service at opendstar.org. The site was refusing connection during my testing, so it appears as though there was an Internet outage at the site.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.
FYI, for the past 4 days, the issue has reappeared with reflectors not existing
Thanks for your attention to this, Gary W7JZU
On May 11, 2018, at 6:00 PM, boomertype notifications@github.com wrote:
Same issue, all the reflectors say - REFLECTOR DOES NOT EXIST Buster is totally unusable, however you still still go Repeater direct, but doesn't allow you to be on reflectors.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52#issuecomment-388513525, or mute the thread https://github.com/notifications/unsubscribe-auth/AlXAXQfxuesWShOxgpUeVgAB17FbqXIzks5txiYlgaJpZM4T6rIt.
Again, this is not because of Buster. This is because Robin Cutshaw's server at opendstar.org is refusing connections to the D-Plus authentication service. Therefore Buster cannot authenticate to the D-Plus system or get any reflector information. I can see if I can reach out to him, but until it's fixed, there is no Buster solution.
Annaliese,
Thank you for the response.
I do understand
73, Gary W7JZU
On Sep 15, 2018, at 11:15 AM, Annaliese McDermond notifications@github.com wrote:
Again, this is not because of Buster. This is because Robin Cutshaw's server at opendstar.org is refusing connections to the D-Plus authentication service. Therefore Buster cannot authenticate to the D-Plus system or get any reflector information. I can see if I can reach out to him, but until it's fixed, there is no Buster solution.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52#issuecomment-421601826, or mute the thread https://github.com/notifications/unsubscribe-auth/AlXAXR_UATSvCP1TucV-HIfPpn13Tqmqks5ubTWwgaJpZM4T6rIt.
I just committed c1f2c7e0 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
Well Done and thanks
Gary
On Sep 15, 2018, at 6:50 PM, Annaliese McDermond notifications@github.com wrote:
I just committed 79ec05 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52#issuecomment-421663325, or mute the thread https://github.com/notifications/unsubscribe-auth/AlXAXQ212ptM_dybz3g0vglCLYrap9Kgks5ubaBcgaJpZM4T6rIt.
Thanks, It is functioning now
73, Gary W7JZU
On Sep 15, 2018, at 6:50 PM, Annaliese McDermond notifications@github.com wrote:
I just committed 79ec05 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52#issuecomment-421663325, or mute the thread https://github.com/notifications/unsubscribe-auth/AlXAXQ212ptM_dybz3g0vglCLYrap9Kgks5ubaBcgaJpZM4T6rIt.
Hi McDerm folks,
My Buster app stopped functioning in the past few weeks. I suspect a recent MacOs upgrade but you know better than I.
Thanks for any help again
73, Gary W7JZU
On Sep 16, 2018, at 4:01 PM, Gary Payne e-coyote@cableone.net wrote:
Thanks, It is functioning now
73, Gary W7JZU
On Sep 15, 2018, at 6:50 PM, Annaliese McDermond <notifications@github.com mailto:notifications@github.com> wrote:
I just committed 79ec05 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52#issuecomment-421663325, or mute the thread https://github.com/notifications/unsubscribe-auth/AlXAXQ212ptM_dybz3g0vglCLYrap9Kgks5ubaBcgaJpZM4T6rIt.
Gary,
Can you provide a few more details about how Buster is failing and on what version of MacOS? I've successfully used Buster on both Catalina and Mojave. (latest version from the App store)
73, Kenny, KU7M
On Sun, Nov 3, 2019 at 2:50 PM garyw7jzu notifications@github.com wrote:
Hi McDerm folks,
My Buster app stopped functioning in the past few weeks. I suspect a recent MacOs upgrade but you know better than I.
Thanks for any help again
73, Gary W7JZU
On Sep 16, 2018, at 4:01 PM, Gary Payne e-coyote@cableone.net wrote:
Thanks, It is functioning now
73, Gary W7JZU
On Sep 15, 2018, at 6:50 PM, Annaliese McDermond < notifications@github.com mailto:notifications@github.com> wrote:
I just committed 79ec05 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mcdermj/buster/issues/52#issuecomment-421663325>, or mute the thread < https://github.com/notifications/unsubscribe-auth/AlXAXQ212ptM_dybz3g0vglCLYrap9Kgks5ubaBcgaJpZM4T6rIt .
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52?email_source=notifications&email_token=AAGKLL23HEP2N4E3TU7ER2LQR5IUPA5CNFSM4E7KWIW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC57AKQ#issuecomment-549187626, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAGKLLZ5Z4T64H2ITT42633QR5IUPANCNFSM4E7KWIWQ .
Kenny,
After investigating the issue, I am concluding that it has to do with the Raspberry Pi and the Ambe card.
I will keep exploring issues related to that configuration.
Thanks for your response
73, Gary W7JZU
On Nov 3, 2019, at 6:14 PM, Kenny Richards notifications@github.com wrote:
Gary,
Can you provide a few more details about how Buster is failing and on what version of MacOS? I've successfully used Buster on both Catalina and Mojave. (latest version from the App store)
73, Kenny, KU7M
On Sun, Nov 3, 2019 at 2:50 PM garyw7jzu notifications@github.com wrote:
Hi McDerm folks,
My Buster app stopped functioning in the past few weeks. I suspect a recent MacOs upgrade but you know better than I.
Thanks for any help again
73, Gary W7JZU
On Sep 16, 2018, at 4:01 PM, Gary Payne e-coyote@cableone.net wrote:
Thanks, It is functioning now
73, Gary W7JZU
On Sep 15, 2018, at 6:50 PM, Annaliese McDermond < notifications@github.com mailto:notifications@github.com> wrote:
I just committed 79ec05 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mcdermj/buster/issues/52#issuecomment-421663325>, or mute the thread < https://github.com/notifications/unsubscribe-auth/AlXAXQ212ptM_dybz3g0vglCLYrap9Kgks5ubaBcgaJpZM4T6rIt .
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52?email_source=notifications&email_token=AAGKLL23HEP2N4E3TU7ER2LQR5IUPA5CNFSM4E7KWIW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC57AKQ#issuecomment-549187626, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAGKLLZ5Z4T64H2ITT42633QR5IUPANCNFSM4E7KWIWQ .
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52?email_source=notifications&email_token=AJK4AXLUREQWUQE5ZPJ2QNLQR5ZP3A5CNFSM4E7KWIW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC6CBNA#issuecomment-549200052, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJK4AXLY4V2XTA5H33E4RGTQR5ZP3ANCNFSM4E7KWIWQ.
No worries Gary, we have all be there. :-)
Good luck in your investigation, I hope you figure it out quickly.
73, Kenny, KU7M
On Mon, Nov 4, 2019 at 6:26 AM garyw7jzu notifications@github.com wrote:
Kenny,
After investigating the issue, I am concluding that it has to do with the Raspberry Pi and the Ambe card.
I will keep exploring issues related to that configuration.
Thanks for your response
73, Gary W7JZU
On Nov 3, 2019, at 6:14 PM, Kenny Richards notifications@github.com wrote:
Gary,
Can you provide a few more details about how Buster is failing and on what version of MacOS? I've successfully used Buster on both Catalina and Mojave. (latest version from the App store)
73, Kenny, KU7M
On Sun, Nov 3, 2019 at 2:50 PM garyw7jzu notifications@github.com wrote:
Hi McDerm folks,
My Buster app stopped functioning in the past few weeks. I suspect a recent MacOs upgrade but you know better than I.
Thanks for any help again
73, Gary W7JZU
On Sep 16, 2018, at 4:01 PM, Gary Payne e-coyote@cableone.net wrote:
Thanks, It is functioning now
73, Gary W7JZU
On Sep 15, 2018, at 6:50 PM, Annaliese McDermond < notifications@github.com mailto:notifications@github.com> wrote:
I just committed 79ec05 which will eventually be version 1.2.3 when it is deployed on the App Store. After consulting with Robin about the architecture, it turns out there are multiple servers that should be tried in order, and there's a new name for them. I have coded this into Buster which should make the authentication process more reliable. I would expect Apple to approve 1.2.3 in the next couple of days and things should be more reliable for folks.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mcdermj/buster/issues/52#issuecomment-421663325>, or mute the thread <
.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/mcdermj/buster/issues/52?email_source=notifications&email_token=AAGKLL23HEP2N4E3TU7ER2LQR5IUPA5CNFSM4E7KWIW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC57AKQ#issuecomment-549187626 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAGKLLZ5Z4T64H2ITT42633QR5IUPANCNFSM4E7KWIWQ
.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/mcdermj/buster/issues/52?email_source=notifications&email_token=AJK4AXLUREQWUQE5ZPJ2QNLQR5ZP3A5CNFSM4E7KWIW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC6CBNA#issuecomment-549200052>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AJK4AXLY4V2XTA5H33E4RGTQR5ZP3ANCNFSM4E7KWIWQ .
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/mcdermj/buster/issues/52?email_source=notifications&email_token=AAGKLL7ZPUT7RTJ7ABKDOOLQSAWIPA5CNFSM4E7KWIW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC7NMQQ#issuecomment-549377602, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAGKLL2S2NW757RVX74CQODQSAWIPANCNFSM4E7KWIWQ .
I wonder if Apple's tightening of apps that exchange geo data is responsible for buster making the connection to the remote AMBEserver on an rpm 3 but not connecting to stations? Is there any issue related to this?