SR2_ Extra1 set to 5
SR2_ Extra2 set to 2
SR2_ Extra3 set to 3
SR2_ Ext_Stat set to 3
SR2_ Params set to 0
SR2_ Position set to 2
SR2_ Raw_CTRL set to 0
SR2_ Raw_Sens set to 2
SR2_ RC_Chan set to 5
I didn't have to touch any of the SR0 or SR1 settings like some threads say you
need too.. Maybe on APM you need too but on my pixhawk I didn't have to..
Only changing the SR2 settings worked for me
SR0 is the built in USB port
SR1 is telemetry 1 Port
SR2 is telemetry 2 port
My minim osd is plugged into telemetry 2 and my 3DR Radio is plugged into
telemetry 1 but if your minim osd is plugged into The telemetry 1 port then you
may just need to change the SR1 settings to above settings. 3DR radio from my
understanding requests what it needs from pixhawk so you shouldn't have to
change any of the SR2 settings if your 3dR radio is plugged into the telemetry
2 port.
Some people report having to set the above settings to SR0 also for minim osd
to work.. So if your having issues them try setting SR0 settings to what's
listed above and SR1 or SR2 settings depending on if your minim osd is plugged
into telemetry 1 or 2 ports and if all all else fails set SR0, SR1, and SR2 to
all the settings listed above, but only try that if your desperate and always
write down the default settings so you can change them back if you have too..
Also for some reason I couldn't get the settings to stick when I used mission
planner to change them and write them. So I used ardupilot app on my Android
tablet and used a otg cable to connect the 3DR radio to my Samsung note 3 and
under the parameters tab I was able to access and change all the settings
without issue.. So make sure your changes to the SR settings stick cuz if they
don't minim osd won't work either and you may pull your hair out like I was
I hope this helps people
Original issue reported on code.google.com by mark97...@gmail.com on 27 Jul 2015 at 3:11
Original issue reported on code.google.com by
mark97...@gmail.comon 27 Jul 2015 at 3:11