OSD shows video but no data overlay + video feed shows noise on power up.

[GoogleCodeExporter]

--> What steps will reproduce the problem?
1.The noise on the video feed goes away when i touch the chips!
2. Tried enabling telemtery in the APM Mission Planner but it doesnt solve the 
problem.
3.

--> What is the expected output? What do you see instead?
Expect to see Data overlay as it showed on the first power up. Subsequent power 
ups it just shows video with no data overlay

--> What version of the product are you using? On what operating system?
using V1.1 on the PX4 FMU+IO boards

--> Please provide any additional information below.

An update to my situation. 

I had actually bought two minimosd's and both of them had the same problem. 

So I have sent both of the units to my local hobby shop and they should be 
sending it back to you to check what's the problem with it...  

Original issue reported on code.google.com by vkumar.a...@gmail.com on 23 Sep 2013 at 3:31

[GoogleCodeExporter]

I had the same issue. I resolved by powering the minimosd from a separate power 
source. I split off a BEC powering the board. It seems the board cannot power 
the minimosd along with a 3dr and a gps.

Original comment by ceejaysd...@gmail.com on 28 Nov 2013 at 7:00

[GoogleCodeExporter]

Closed as we have a new version.

Ifthe problem is still present please reopen it.

Original comment by gabek...@gmail.com on 28 Nov 2014 at 11:44

• Changed state: Done