I'm trying to upload to the following board: Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "XIAO_ESP32S3, Disabled, Disabled, QIO 80MHz, 8MB (64Mb), Core 1, Core 1, Hardware CDC and JTAG, Enabled, Disabled, Disabled, UART0 / Hardware CDC, Default with spiffs (3MB APP/1.5MB SPIFFS), 240MHz (WiFi), 921600, None, Disabled"
When I do, I receive the following error; it looks like it's picking the wrong offset or address somehow. Is there some method for changing the start address? I'm trying to upload 130KB of data.
esptool.py v4.5.1
Serial port COM5
Connecting...
Chip is ESP32-S3 (revision v0.1)
Features: WiFi, BLE
Crystal is 40MHz
MAC: dc:54:75:d8:e8:14
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Auto-detected Flash size: 4MB
A fatal error occurred: File C:\Users\3ricj\AppData\Local\Temp\arduino_build_755263/lightmacro.spiffs.bin (length 1572864) at offset 6750208 will not fit in 4194304 bytes of flash. Use --flash_size argument, or change flashing address.
SPIFFS Upload failed!
I'm trying to upload to the following board: Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "XIAO_ESP32S3, Disabled, Disabled, QIO 80MHz, 8MB (64Mb), Core 1, Core 1, Hardware CDC and JTAG, Enabled, Disabled, Disabled, UART0 / Hardware CDC, Default with spiffs (3MB APP/1.5MB SPIFFS), 240MHz (WiFi), 921600, None, Disabled"
When I do, I receive the following error; it looks like it's picking the wrong offset or address somehow. Is there some method for changing the start address? I'm trying to upload 130KB of data.
[SPIFFS] data : C:\Users\3ricj\Documents\GitHub\lightmacro\data [SPIFFS] start : 6750208 [SPIFFS] size : 1536 [SPIFFS] page : 256 [SPIFFS] block : 4096 /index.htm /jquery-3.6.0.min.js /rangeslider.css /rangeslider.js /rangeslider.min.js [SPIFFS] upload : C:\Users\3ricj\AppData\Local\Temp\arduino_build_755263/lightmacro.spiffs.bin [SPIFFS] address: 6750208 [SPIFFS] port : COM5 [SPIFFS] speed : 921600 [SPIFFS] mode : dio [SPIFFS] freq : 80m
esptool.py v4.5.1 Serial port COM5 Connecting... Chip is ESP32-S3 (revision v0.1) Features: WiFi, BLE Crystal is 40MHz MAC: dc:54:75:d8:e8:14 Uploading stub... Running stub... Stub running... Changing baud rate to 921600 Changed. Configuring flash size... Auto-detected Flash size: 4MB
A fatal error occurred: File C:\Users\3ricj\AppData\Local\Temp\arduino_build_755263/lightmacro.spiffs.bin (length 1572864) at offset 6750208 will not fit in 4194304 bytes of flash. Use --flash_size argument, or change flashing address. SPIFFS Upload failed!