Toyota Rav4 SoC setup

[phanja]

Hi, could you help with setting up soc. I tried to set up via tx in home assistant a few months back with no luck but hoping the auto pid request will work.

here is the car scanner log: log r4p soc.txt

let me know if anything else is needed. thanks

[meatpiHQ]

@phanja I assume you clicked on the SoC sensor and the repeating PID request is the SoC ?

What was the SoC at the time of the log. It will also be helpful if you make another log with different SoC value.

>015B2
7EB03415BE0
7EA03415BE0

>015B2
7EA03415BE0
7EB03415BE0

[phanja]

it was either 87.8 or 87.05. I'll get more logs of lower values as it depletes this week.

here it is at 83.14: log 83.txt

not sure if this is any help but I saw others using "A*20 / 51" to get it to work with torque pro

[meatpiHQ]

@phanja alright try this please, update the firmware then in the Automate tab,

1- click on choose file and select wican_vehicle_profiles_v142.json 2- click update "Car Data" 3- Refresh the page 4- enable "car specific" 5- Select Rav4 6- Set your Destination Topic and Time, then click store 7- Reboot

wican-fw_v322_hv300.zip wican_vehicle_profiles_v142.json

[phanja]

Thanks I now get the SoC readings. Any resources on home assistant discovery? I'm gonna go ahead and add it through the config yaml

[meatpiHQ]

@phanja the discovery feature is not yet functional, I will release this firmware later this week with this feature enabled.