Might have a small issue trying to use Automate with 3.30
Uploaded the vehicles json for my Kia e-Soul (SK3 post 2019 64kWh) using the Ioniq/Kona profile, and, had to change to the AutoPid protocol (that wasn't obvious)...
Initially, it straight out worked, but the 1000ms cycle time* and the initial topic I set to wicanauto didn't suit me.
I changed it to 5000ms and set "wican/auto" to keep the same mqtt root topic as the general one.
And... it doesn't load anything anymore, the topic came back as "wicanauto", chewing the "/" away, and wican/can/rx isn't budging (can is online)
parameter parsing issue ?
Thanks :)
*(I which you could set cycle_times per PID and even throttle updates per variable actually, Battery Power at 1 seconds would be great, but I don't need to receive BMS SoC more than every 10 seconds)
Hi,
Might have a small issue trying to use Automate with 3.30
Uploaded the vehicles json for my Kia e-Soul (SK3 post 2019 64kWh) using the Ioniq/Kona profile, and, had to change to the AutoPid protocol (that wasn't obvious)...
Initially, it straight out worked, but the 1000ms cycle time* and the initial topic I set to wicanauto didn't suit me. I changed it to 5000ms and set "wican/auto" to keep the same mqtt root topic as the general one.
And... it doesn't load anything anymore, the topic came back as "wicanauto", chewing the "/" away, and wican/can/rx isn't budging (can is online)
parameter parsing issue ?
Thanks :)
*(I which you could set cycle_times per PID and even throttle updates per variable actually, Battery Power at 1 seconds would be great, but I don't need to receive BMS SoC more than every 10 seconds)