Open lucabacchipg opened 1 week ago
@lucabacchipg while monitoring in car scanner click on the SoC sensor let it log for few seconds then immediately unplug WiCAN from the OBD port. So we can easily find the SoC logs at the end of the file. Also note the last SoC value from car scanner.
log.txt Done, value of soc is about 93.22 % should be bit 5+6 converted into decimal and divide by 400
ps. you can look here where use a ATZ command to receive reply ( you can also look at this link https://www.forumelettrico.it/forum/post438519.html where are explained by using 2 image)
@lucabacchipg I've created the profile, please follow the instructions in the link below.
https://meatpihq.github.io/wican-fw/home-assistant/integration_setup
That's work perfect. IF possible need to load other value to read
Hello, thas is possibile to have a profile for Renault Twizy ? This will be fantastic :) -Soc % -Range KM -Charge State -Plug State Twizy-CanBus.pdf