search

mechano / Kingroon_KP3S_Pro_Marlin_Firmware

Marlin firmware for Kingroon KP3S Pro
GNU General Public License v3.0
23 stars 3 forks source link

not booting #15

Open Duffsman opened 3 months ago

Duffsman commented 3 months ago

Hi! Thanks for providing this firmware! After flashing the firmware the printer is stuck in the "booting..." screen. How can that be fixed? The processor on the board is a GD32F303VET6.

mechano commented 3 months ago

Maybe the SD is corrupted. Try another SD. Try also another version of the firmware just to be sure my compile is not broken.

Duffsman commented 3 months ago

I will try, thanks for the very quick reply!

Duffsman commented 3 months ago

you were right, the sd card was the issue. thanks a lot!

mechano commented 3 months ago

Buy the Kingston Industrial 8GB, it's reliable for this application.

Il giorno lun 24 giu 2024 alle ore 11:26 Felix @.***> ha scritto:

you were right, the sd card was the issue. thanks a lot!

— Reply to this email directly, view it on GitHub https://github.com/mechano/Kingroon_KP3S_Pro_Marlin_Firmware/issues/15#issuecomment-2186029536, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAV5ZA2D44ZFQSCO3XVVOODZI7Q25AVCNFSM6AAAAABJZLJ5SCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBWGAZDSNJTGY . You are receiving this because you commented.Message ID: @.*** com>

-- Roberto Giuffrè tel. +39-328-9140378 email: @. pec: @.