search

meefik / linuxdeploy

Install and run GNU/Linux on Android
https://meefik.github.io/linuxdeploy
GNU General Public License v3.0
5.22k stars 680 forks source link

No VNC, XServer or SSH #259

Open aharonephraim opened 9 years ago

aharonephraim commented 9 years ago

I am not exactly sure what the problem is honestly, I'm not a tremendous expert in this, although I did work through quite a few problems successfully (all the problems associated with using a rooted Samsung stock rom and not having any computer to attach it to - SD card write privileges, permissions of more than a dozen different write locations, formatting issues, SELINUX enforcing permissive, etc. are solved). At this point, it isn't starting VNC or SSH - and if it is starting SSH, it isn't letting me get in using an SSH client (i set the connection to root@127.0.0.1, and it says "connection refused"). Here is my log, just a start and a stop:

[21:28:00] >>> begin: start [21:28:00] Mounting partitions:
[21:28:00] / ... done [21:28:00] /proc ... done [21:28:00] /sys ... done [21:28:00] /sys/fs/selinux ... done [21:28:00] /dev ... done [21:28:00] ln: /data/data/ru.meefik.linuxdeploy/linux/mnt/dev/fd: File exists [21:28:00] ln: /data/data/ru.meefik.linuxdeploy/linux/mnt/dev/stdin: File exists [21:28:00] ln: /data/data/ru.meefik.linuxdeploy/linux/mnt/dev/stdout: File exists [21:28:00] ln: /data/data/ru.meefik.linuxdeploy/linux/mnt/dev/stderr: File exists [21:28:00] /dev/tty ... skip [21:28:00] /dev/pts ... done [21:28:00] /dev/shm ... done [21:28:00] /proc/sys/fs/binfmt_misc ... skip [21:28:00] Updating configuration:
[21:28:00] dns ... done [21:28:00] mtab ... done [21:28:00] Starting services:
[21:28:00] SSH :22 ... sed: /data/data/ru.meefik.linuxdeploy/linux/mnt/etc/ssh/sshd_config: No such file or directory [21:28:01] stdin: is not a tty [21:28:01] /etc/ssh/sshd_config: No such file or directory [21:28:01] fail [21:28:01] VNC :5900 ... cat: can't open '/data/data/ru.meefik.linuxdeploy/linux/mnt/tmp/xsession.pid': No such file or directory [21:28:01] Failed to start message bus: Failed to open "/etc/dbus-1/system.conf": No such file or directory [21:28:01] stdin: is not a tty [21:28:01] -su: vncserver: command not found [21:28:01] fail [21:28:01] <<< end: start [21:28:07] >>> begin: stop [21:28:07] Stopping services:
[21:28:07] SSH ... done [21:28:08] VNC ... stdin: is not a tty [21:28:08] -su: vncserver: command not found [21:28:08] fail [21:28:08] Release resources ... done [21:28:08] Unmounting partitions:
[21:28:08] /sys/fs/selinux ... done [21:28:08] /sys ... done [21:28:08] /proc ... done [21:28:09] /dev/shm ... done [21:28:09] /dev/pts ... done [21:28:09] /dev ... done [21:28:09] / ... done [21:28:09] /proc/sys/fs/binfmt_misc ... skip [21:28:09] Disassociating loop device ... done [21:28:09] <<< end: stop

aharonephraim commented 9 years ago

I tried to install it with XServer and had equally bad luck. It seems like there are files missing.

[14:08:06] SSH :22 ... sed: /data/data/ru.meefik.linuxdeploy/linux/mnt/etc/ssh/sshd_config: No such file or directory [14:08:06] stdin: is not a tty [14:08:06] /etc/ssh/sshd_config: No such file or directory [14:08:06] fail [14:08:06] X Server ... Failed to start message bus: Failed to open "/etc/dbus-1/system.conf": No such file or directory [14:08:06] stdin: is not a tty

when I try to go reconfigure, it starts, and then after a few items in it says "E: dpkg was interrupted. you must manually run dpkg --configure -a to correct the problem" - I understand that it might be able to fix it, but when I tried to run it as a command it said "dpkg: not found"

my device status is as follows:

[15:55:10] >>> begin: status [15:55:10] Linux Deploy version: 1.5.1-144 [15:55:10] Device: SM-T230NU [15:55:10] Android: 4.4.2 [15:55:10] Architecture: armv7l [15:55:11] Kernel: 3.10.0-1494934 [15:55:11] Memory: 102/1319 MB [15:55:11] Swap: 0/0 MB [15:55:11] SELinux: yes [15:55:11] Loop devices: yes [15:55:11] Support binfmt_misc: no [15:55:11] Supported FS: cramfs exfat ext2 ext3 ext4 fuseblk msdos vfat
[15:55:11] Mounted system: unknown [15:55:11] Running services:
[15:55:11] * SSH: no [15:55:11] * VNC: no [15:55:11] Mounted parts on Linux:
[15:55:11] ...not mounted anything [15:55:11] Available mount points:
[15:55:11] * /mnt/secure/asec: 7.4/7.4 GB (vfat) [15:55:11] * /system: 0.2/2.0 GB (ext4) [15:55:11] * /cache: 0.2/0.2 GB (ext4) [15:55:11] * /data: 2.0/4.7 GB (ext4) [15:55:11] * /efs: 0.0/0.0 GB (ext4) [15:55:11] * /NVM: 0.0/0.0 GB (ext4) [15:55:11] * /mnt/shell/emulated: 1.9/4.7 GB (sdcardfs) [15:55:11] * /mnt/media_rw/extSdCard: 7.4/7.4 GB (vfat) [15:55:11] * /storage/extSdCard: 7.4/7.4 GB (sdcardfs) [15:55:11] * /storage/emulated/0: 1.9/4.7 GB (sdcardfs) [15:55:11] * /storage/emulated/0/Android/obb: 1.9/4.7 GB (sdcardfs) [15:55:11] * /storage/emulated/legacy: 1.9/4.7 GB (sdcardfs) [15:55:11] * /storage/emulated/legacy/Android/obb: 1.9/4.7 GB (sdcardfs) [15:55:11] * /mnt/asec/oyw.tnc-1: 0.0/0.0 GB (ext4) [15:55:11] Available partitions:
[15:55:11] fdisk: can't open '/dev/block/loop0' [15:55:11] fdisk: can't open '/dev/block/loop2' [15:55:11] fdisk: can't open '/dev/block/loop3' [15:55:11] fdisk: can't open '/dev/block/loop4' [15:55:11] fdisk: can't open '/dev/block/loop5' [15:55:11] fdisk: can't open '/dev/block/loop6' [15:55:11] fdisk: can't open '/dev/block/loop7' [15:55:11] * /dev/block/mmcblk0p1: 2 MB (EFI GPT) [15:55:11] * /dev/block/mmcblk1p1: 7947 MB (Win95 FAT32 (LBA)) [15:55:11] <<< end: status

kdb424 commented 9 years ago

Try completely uninstalling, then updating to the latest version. It seems the install had some issues.

girisgc commented 8 years ago

I have successfully installed kali linux in my Samsung Galaxy Note 3 but when I connect through vnc, I am getting a blank screen with a mouse cursor. I am also getting an error that oh no something has gone wrong, and getting logout Burton. Please help me to get rid of this issue. Thank you

This is my status in linux deploy

[23:51:09] Updating configuration file ... done [23:51:09] >>> status [23:51:09] Linux Deploy: 1.5.6-191 [23:51:09] BusyBox: v1.24.1-jrummy [23:51:09] Device: SAMSUNG-SM-N900A [23:51:09] Android: 4.4.2 [23:51:09] Architecture: armv7l [23:51:09] Kernel: 3.4.0-722276 [23:51:09] Memory: 200/2779 MB [23:51:09] Swap: 0/0 MB [23:51:09] SELinux: yes [23:51:09] Loop devices: yes [23:51:09] Support binfmt_misc: no [23:51:09] Supported FS: exfat ext2 ext3 ext4 fuseblk vfat [23:51:09] Mounted system: Kali GNU/Linux 2.0 (sana) [23:51:09] Running services: [23:51:09] * SSH: yes [23:51:09] * GUI: yes [23:51:09] Mounted parts on Linux: [23:51:09] * / [23:51:09] * /proc [23:51:09] * /sys [23:51:09] * /sys/fs/selinux [23:51:09] * /dev [23:51:09] * /dev/pts [23:51:09] * /dev/shm [23:51:09] Available mount points: [23:51:09] * /mnt/secure/asec: 3.1/7.4 GB (vfat) [23:51:09] * /mnt/asec/com.playstationemulator.pro-1: 0.0/0.0 GB (ext4) [23:51:09] * /mnt/asec/com.sololearn.htmltrial-1: 0.0/0.0 GB (ext4) [23:51:09] * /system: 0.3/2.4 GB (ext4) [23:51:10] * /data: 9.9/26.0 GB (ext4) [23:51:10] * /cache: 0.5/0.5 GB (ext4) [23:51:10] * /efs: 0.0/0.0 GB (ext4) [23:51:10] * /persdata/absolute: 0.0/0.0 GB (ext4) [23:51:10] * /firmware: 0.1/0.1 GB (vfat) [23:51:10] * /firmware-modem: 0.0/0.1 GB (vfat) [23:51:10] * /mnt/shell/container: 9.9/26.0 GB (sdcardfs) [23:51:10] * /mnt/shell/emulated: 9.8/26.0 GB (sdcardfs) [23:51:10] * /mnt/media_rw/extSdCard: 3.1/7.4 GB (vfat) [23:51:10] * /storage/extSdCard: 3.1/7.4 GB (sdcardfs) [23:51:10] * /storage/emulated/0: 9.8/26.0 GB (sdcardfs) [23:51:10] Available partitions: [23:51:11] * /dev/block/mmcblk1p1: 7989 MB (Win95 FAT32 (LBA)) [23:51:11] <<< status