search

meklort / netbook-installer

Automatically exported from code.google.com/p/netbook-installer
6 stars 2 forks source link

System panic in 0.8.4 RC1 with 10.6.3 on Dell 1012 #303

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?

Using h-mosl1063 and NetbookBootMaker 0.8.4 RC1, when rebooting from HD:
1. Get message: "Unable to patch 64 bit kernal. Please use arch=i386 to use a 
10.6.2 or newer kernal"
2. When stop Chamelian loader and enter arch=i368 get System Panic (cpu 0 
caller 0xc5bb3a2) "No HPETs available ...
3. When load with arch=i386 ForceHPET=y same result.

What netbook are you using this on?
A Dell Mini 1012, BIOS A09 

What is the expected output? What do you see instead?
Expected: boot into system. Instead, I get the panic screen

What version of the product are you using? On what operating system?
0.8.4 RC1, Snow Leopard 10.6.3 (Mac.OSX.Snow.Leopard.v10.6.3-HOTiSO)

Please provide any additional information below.

If I boot from the installation disk and select newly installed OSX partition 
on HD then all is good - system full function.  Then ran NetbookInstaller 0.8.4 
RC1 with same result.

Original issue reported on code.google.com by det.vo...@gmail.com on 22 Sep 2010 at 6:18

Attachments:

GoogleCodeExporter commented 9 years ago 
Tried again with NetbookBootMaker 0.8.4 pre. Initial boot was OK after I used 
arch=i386 parameter. 

I went off and had dinner whilst the network cable was still plugged in.  After 
dinner I ran NetbookInstaller 0.8.4 pre.  Whilst away at dinner, SL had done 
its software update downloads and when I went to shutdown I has 6 updates to 
install. 

System Panic on next reboot - "Version mis-match between Kernel and CPU . . . 
I'll try again without allowing the Mac software update.

Original comment by det.vo...@gmail.com on 22 Sep 2010 at 9:28

GoogleCodeExporter commented 9 years ago 
This time, successfully installed SL 10.8.3 using NB 0.8.4pre and executed NI 
0.8.4pre.  Still got an issue needing arch=i386

Can I force 32bit with a lin in 
/Library/Preferences/SystemConfiguration/com.apple.Boot.plist ?
If so, what is the syntax?

Original comment by det.vo...@gmail.com on 22 Sep 2010 at 11:15

GoogleCodeExporter commented 9 years ago 
Found the syntax. Will try

<key>Kernel Flags</key>
<string>arch=i386</string>

Original comment by det.vo...@gmail.com on 22 Sep 2010 at 11:32

GoogleCodeExporter commented 9 years ago 
I had the exact problem now, with dual boot on asus 1018p win7 first partition 
and os 10.6.3 on the second, can't boot OS unless use usb to lead it.
so anyone have a solution or pointing me.

Original comment by madahac...@gmail.com on 28 Dec 2011 at 2:59

GoogleCodeExporter commented 9 years ago 
i am having this error in my lenovo ideapad s10 3c
when i boot in verbose mode  it shows 64 bit enabled
and the last line is osxrestart version 1.5a(c).....bla..bla...bla
please some one help me to install os x on my s10-3c

thank uuuuu in advance

Original comment by yagpalkh...@gmail.com on 27 May 2014 at 8:50