search

merbanan / rtl_433

Program to decode radio transmissions from devices on the ISM bands (and other frequencies)
GNU General Public License v2.0
6.16k stars 1.33k forks source link

Missing Fine Offset Electronics WH1080/WH3080 decode #1435

Closed Midimagic closed 4 years ago

merbanan commented 4 years ago

Please elaborate.

Midimagic commented 4 years ago

Hi I have downloaded your latest version and it hardly decodes anything, but when I use your older version it decodes a lot more. what have you done to it ?

merbanan commented 4 years ago

Post complete command line. It might explain your issue.

Midimagic commented 4 years ago

D:\Ham Programs\rtl_433-20.02-58-ga0b9b1b-win-x64>rtl_433.exe

Midimagic commented 4 years ago

It used to display this when I started it:

D:\Ham Programs\rtl433_win64_daily>rtl_433.exe Registering protocol [1] "Rubicson Temperature Sensor" Registering protocol [2] "Prologue Temperature Sensor" Registering protocol [3] "Waveman Switch Transmitter" Registering protocol [4] "LaCrosse TX Temperature / Humidity Sensor" Registering protocol [5] "Acurite 609TXC Temperature and Humidity Sensor" Registering protocol [6] "Oregon Scientific Weather Sensor" Registering protocol [7] "KlikAanKlikUit Wireless Switch" Registering protocol [8] "AlectoV1 Weather Sensor (Alecto WS3500 WS4500 Ventus W155/W044 Oregon)" Registering protocol [9] "Cardin S466-TX2" Registering protocol [10] "Fine Offset Electronics, WH2 Temperature/Humidity Sensor" Registering protocol [11] "Nexus Temperature & Humidity Sensor" Registering protocol [12] "Ambient Weather Temperature Sensor" Registering protocol [13] "Calibeur RF-104 Sensor" Registering protocol [14] "DSC Security Contact" Registering protocol [15] "GT-WT-02 Sensor" Registering protocol [16] "Danfoss CFR Thermostat" Registering protocol [17] "Chuango Security Technology" Registering protocol [18] "Generic Remote SC226x EV1527" Registering protocol [19] "TFA-Twin-Plus-30.3049 and Ea2 BL999" Registering protocol [20] "Fine Offset Electronics WH1080/WH3080 Weather Station" Registering protocol [21] "WT450" Registering protocol [22] "LaCrosse WS-2310 Weather Station" Registering protocol [23] "Esperanza EWS" Registering protocol [24] "Efergy e2 classic" Registering protocol [25] "Generic temperature sensor 1" Registering protocol [26] "WG-PB12V1" Registering protocol [27] "Acurite 592TXR Temp/Humidity, 5n1 Weather Station, 6045 Lightning" Registering protocol [28] "Acurite 986 Refrigerator / Freezer Thermometer" Registering protocol [29] "HIDEKI TS04 Temperature, Humidity, Wind and Rain Sensor" Registering protocol [30] "Watchman Sonic / Apollo Ultrasonic / Beckett Rocket oil tank monitor" Registering protocol [31] "CurrentCost Current Sensor" Registering protocol [32] "emonTx OpenEnergyMonitor" Registering protocol [33] "HT680 Remote control" Registering protocol [34] "S3318P Temperature & Humidity Sensor" Registering protocol [35] "Akhan 100F14 remote keyless entry" Registering protocol [36] "Quhwa" Registering protocol [37] "OSv1 Temperature Sensor" Registering protocol [38] "Proove" Registering protocol [39] "Bresser Thermo-/Hygro-Sensor 3CH" Registering protocol [40] "Springfield Temperature and Soil Moisture" Registering protocol [41] "Oregon Scientific SL109H Remote Thermal Hygro Sensor" Registering protocol [42] "Acurite 606TX Temperature Sensor" Registering protocol [43] "TFA pool temperature sensor" Registering protocol [44] "Kedsum Temperature & Humidity Sensor" Registering protocol [45] "blyss DC5-UK-WH (433.92 MHz)" Registering protocol [46] "Steelmate TPMS" Registering protocol [47] "Schrader TPMS" Registering protocol [48] "Elro DB286A Doorbell" Registering protocol [49] "Efergy Optical" Registering protocol [50] "Honda Car Key" Registering protocol [51] "Fine Offset Electronics, XC0400" Registering protocol [52] "Radiohead ASK" Registering protocol [53] "Kerui PIR Sensor" Registering protocol [54] "Fine Offset WH1050 Weather Station" Registering protocol [55] "Honeywell Door/Window Sensor" Registering protocol [56] "Maverick ET-732/733 BBQ Sensor" Registering protocol [57] "LaCrosse TX141-Bv2/TX141TH-Bv2 sensor" Registering protocol [58] "Acurite 00275rm,00276rm Temp/Humidity with optional probe" Registering protocol [59] "LaCrosse TX35DTH-IT Temperature sensor" Registering protocol [60] "LaCrosse TX29IT Temperature sensor" Registering protocol [61] "Vaillant calorMatic 340f Central Heating Control" Registering protocol [62] "Fine Offset Electronics, WH25 Temperature/Humidity/Pressure Sensor" Registering protocol [63] "Fine Offset Electronics, WH0530 Temperature/Rain Sensor" Registering protocol [64] "IBIS beacon" Registering protocol [65] "Oil Ultrasonic STANDARD FSK" Registering protocol [66] "Citroen TPMS" Registering protocol [67] "Oil Ultrasonic STANDARD ASK" Registering protocol [68] "Thermopro TP11 Thermometer" Registering protocol [69] "Solight TE44" Registering protocol [70] "Wireless Smoke and Heat Detector GS 558" Registering protocol [71] "Generic wireless motion sensor" Registering protocol [72] "Toyota TPMS" Registering protocol [73] "Ford TPMS" Registering protocol [74] "Renault TPMS" Registering protocol [75] "FT-004-B Temperature Sensor" Registering protocol [76] "Ford Car Key" Registering protocol [77] "Philips outdoor temperature sensor" Registering protocol [78] "Schrader TPMS EG53MA4" Registering protocol [79] "Nexa" Registering protocol [80] "Thermopro TP12 Thermometer" Registering protocol [81] "GE Color Effects" Registering protocol [82] "X10 Security" Registering protocol [83] "Interlogix GE UTC Security Devices" Registered 83 out of 102 device decoding protocols Found 1 device(s)

trying device 0: Realtek, RTL2838UHIDIR, SN: 00000001 Found Rafael Micro R820T tuner Using device 0: Generic RTL2832U OEM Exact sample rate is: 250000.000414 Hz Sample rate set to 250000. Bit detection level set to 0 (Auto). Tuner gain set to Auto. Reading samples in async mode... Tuned to 433920000 Hz.

merbanan commented 4 years ago

Yes, the removal of that list is by design. The decoders are still there (plus around 70 more).

Midimagic commented 4 years ago

All I get now is:

rtl_433 version 20.02-58-ga0b9b1b branch at 202005231014 inputs file rtl_tcp RTL-SDR Use -h for usage help and see https://triq.org/ for documentation. Trying conf file at "D:\Ham Programs\rtl_433-20.02-58-ga0b9b1b-win-x64\rtl_433.conf"... Trying conf file at "C:\Users\magic\AppData\Local\rtl_433\rtl_433.conf"... Trying conf file at "C:\ProgramData\rtl_433\rtl_433.conf"... Registered 125 out of 153 device decoding protocols [ 1-4 8 11-12 15-17 19-21 23 25-26 29-36 38-60 63 67-71 73-100 102-105 108-116 119 121 124-128 130-149 151-153 ] Found Rafael Micro R820T tuner Exact sample rate is: 250000.000414 Hz [R82XX] PLL not locked! Sample rate set to 250000 S/s. Tuner gain set to Auto. Tuned to 433.920MHz.

time : 2020-07-18 10:49:58 model : TFA-Pool Id : 110 Channel : 1 Battery : 1 Temperature: 24.4 C Integrity : CHECKSUM

merbanan commented 4 years ago

Registered 125 out of 153 device decoding protocols. <- That is the important line.

merbanan commented 4 years ago

Is there any issues with reception of signals? Or only the output during startup?

Midimagic commented 4 years ago

The old version picks up a lot more:

Found 1 device(s)

trying device 0: Realtek, RTL2838UHIDIR, SN: 00000001 Found Rafael Micro R820T tuner Using device 0: Generic RTL2832U OEM Exact sample rate is: 250000.000414 Hz Sample rate set to 250000. Bit detection level set to 0 (Auto). Tuner gain set to Auto. Reading samples in async mode... Tuned to 433920000 Hz. 2020-07-18 10:55:04 : TFA pool temperature sensor Id: 96 Channel number: 1 Temperature: 23.5 C 2020-07-18 10:55:07 : Nexus Temperature/Humidity House Code: 131 Battery: OK Channel: 1 Temperature: 22.60 C Humidity: 57 % 2020-07-18 10:55:09 : Nexus Temperature/Humidity House Code: 188 Battery: OK Channel: 1 Temperature: 25.10 C Humidity: 50 % 2020-07-18 10:55:17 : TFA pool temperature sensor Id: 110 Channel number: 1 Temperature: 25.2 C 2020-07-18 10:55:28 : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 121 Temperature: 20.9 C Humidity: 63 % Wind string: NW Wind degrees: 315 Wind avg speed: 7.34 Wind gust: 15.91 Total rainfall: 67.8 Battery: OK 2020-07-18 10:55:28 : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 121 Temperature: 20.9 C Humidity: 63 % Wind string: NW Wind degrees: 315 Wind avg speed: 7.34 Wind gust: 15.91 Total rainfall: 67.8 Battery: OK 2020-07-18 10:55:53 : TFA pool temperature sensor Id: 110 Channel number: 1 Temperature: 25.1 C 2020-07-18 10:56:04 : Nexus Temperature/Humidity House Code: 131 Battery: OK Channel: 1 Temperature: 22.60 C Humidity: 57 % 2020-07-18 10:56:06 : Nexus Temperature/Humidity House Code: 188 Battery: OK Channel: 1 Temperature: 25.20 C Humidity: 49 % 2020-07-18 10:56:06 : Springfield Temperature & Moisture SID: 188 Channel: 1 Battery: LOW Transmit: AUTO Temperature: 25.2 C Moisture: 15

Midimagic commented 4 years ago

It picks up a lot less, or does not decode them.

Midimagic commented 4 years ago

The old version of the program is 300KB in lengh It does not give a version number.

merbanan commented 4 years ago

Can you identify what sensors you are not receiving?

Midimagic commented 4 years ago

I now get an error: D:\Ham Programs\rtl_433-20.02-58-ga0b9b1b-win-x64>rtl_433.exe rtl_433 version 20.02-58-ga0b9b1b branch at 202005231014 inputs file rtl_tcp RTL-SDR Use -h for usage help and see https://triq.org/ for documentation. Trying conf file at "D:\Ham Programs\rtl_433-20.02-58-ga0b9b1b-win-x64\rtl_433.conf"... Trying conf file at "C:\Users\magic\AppData\Local\rtl_433\rtl_433.conf"... Trying conf file at "C:\ProgramData\rtl_433\rtl_433.conf"... Registered 125 out of 153 device decoding protocols [ 1-4 8 11-12 15-17 19-21 23 25-26 29-36 38-60 63 67-71 73-100 102-105 108-116 119 121 124-128 130-149 151-153 ] usb_open error -3 Please fix the device permissions, e.g. by installing the udev rules file rtl-sdr.rules

Midimagic commented 4 years ago

2018-08-26 21:13:43 : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 125 Temperature: 17.5 C Humidity: 97 % Wind string: SW Wind degrees: 225 Wind avg speed: 3.67 Wind gust: 7.34 Total rainfall: 457.5 Battery: OK 2018-08-26 21:13:43 : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 125 Temperature: 17.5 C Humidity: 97 % Wind string: SW Wind degrees: 225 Wind avg speed: 3.67 Wind gust: 7.34 Total rainfall: 457.5 Battery: OK

Midimagic commented 4 years ago

I am not getting these:

2018-09-03 12:29:21 : Fine Offset Electronics WH3080 Weather Station Msg type: 2 UV Sensor ID: 89 Sensor Status: OK UV Index: 3 Lux : 47748.7 Watts/m : 69.91 Foot-candles: 4437.61

2018-08-26 21:12:07 : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 125 Temperature: 17.5 C Humidity: 97 % Wind string: SW Wind degrees: 225 Wind avg speed: 4.90 Wind gust: 11.02 Total rainfall: 457.5 Battery: OK

Midimagic commented 4 years ago

That is a weather station next door and it is always there. TFA-Pool is my AURIOL Temp sensor.

merbanan commented 4 years ago

The code for these devices have changed alot during development. To help us fix this issue you can record the signals and attach them to this issue.

Use the new version and run with "rtl_433 -S unknown" for a while. Then use the old version with rtl_433 -r g00XX.cu8". When you find signals that decode with the old version but not the new version attach that file together with the output. We can then look into the issue.

Midimagic commented 4 years ago

When you say signals do you just mean the text ?

merbanan commented 4 years ago

No, actual raw baseband recordings of the signal. Just run "rtl_433 -S unknown" and it should output files whenever the WH3080 device transmits.

Midimagic commented 4 years ago

Ok I will give it 10 mins of each.

Midimagic commented 4 years ago

rtl_433-20.02-58-ga0b9b1b-win-x64.zip

merbanan commented 4 years ago

Can you post the output from one sample file that works with the old rtl_433 but doesn't with the new version?

Midimagic commented 4 years ago

unknown.zip There seems to be parameters missing like wind String. This one seems to be missing: 2018-08-23 17:51:47 : Fine Offset Electronics WH3080 Weather Station Msg type: 2 UV Sensor ID: 89 Sensor Status: OK UV Index: 1 Lux : 12594.7 Watts/m : 18.44 Foot-candles: 1170.51

Midimagic commented 4 years ago

What is the difference between the Static and the normal program ?

merbanan commented 4 years ago

Can you upload the samples like you did the first time? The second archive looks corrupt.

merbanan commented 4 years ago

The static program should be more self contained.

Midimagic commented 4 years ago

I will try again

Midimagic commented 4 years ago

unknown.zip

merbanan commented 4 years ago

Same issue. Can you do exactly like you did the first time? And make sure you only include .cu8 files.

Midimagic commented 4 years ago

Hi

Sorry but the earlier version does not do that, there is no output to the screen and only one file gets saved when I do a ctrl C at the end.

Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 13:06 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

Same issue. Can you do exactly like you did the first time? And make sure you only include .cu8 files.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660480572, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZX4YOYPFHNFHXRN7DDR4GM6XANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

The old version used another syntax to record signals, I only meant you to use the newer version to record signals. To me it seems that the signals are decoded but not output. With -S unknown you only get signals rtl_433 can't decode. Try "rtl_433 -S all" with the new version of rtl_433 and upload a new set of files.

Midimagic commented 4 years ago

Ok will do tomorrow. I think it decodes them but some of the parameters are missing Wind string and the UV settings.

Thanks Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 19:45 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

The old version used another syntax to record signals, I only meant you to use the newer version to record signals. To me it seems that the signals are decoded but not output. With -S unknown you only get signals rtl_433 can't decode. Try "rtl_433 -S all" with the new version of rtl_433 and upload a new set of files.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660532700, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZQ6H4IQW3YOMCTYNN3R4H3UXANCNFSM4O7V2R7Q.

Midimagic commented 4 years ago

Hi Benjamin

I am doing a session now. You don't happen to know how to decode the Thames Water meters do you ?

Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 19:45 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

The old version used another syntax to record signals, I only meant you to use the newer version to record signals. To me it seems that the signals are decoded but not output. With -S unknown you only get signals rtl_433 can't decode. Try "rtl_433 -S all" with the new version of rtl_433 and upload a new set of files.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660532700, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZQ6H4IQW3YOMCTYNN3R4H3UXANCNFSM4O7V2R7Q.

Midimagic commented 4 years ago

Midi Magic has shared a OneDrive file with you. To view it, click the link below. https://1drv.ms/u/s!Ai5b7UawqlwzhBghKQlYPx-jm3x- [https://r1.res.office365.com/owa/prem/images/dc-zip_20.png]https://1drv.ms/u/s!Ai5b7UawqlwzhBghKQlYPx-jm3x- rtl_433-20.02-58-ga0b9b1b-win-x64.ziphttps://1drv.ms/u/s!Ai5b7UawqlwzhBghKQlYPx-jm3x-

Latest files. It is a bit big so I hope you can get it from the cloud.

Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 19:45 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

The old version used another syntax to record signals, I only meant you to use the newer version to record signals. To me it seems that the signals are decoded but not output. With -S unknown you only get signals rtl_433 can't decode. Try "rtl_433 -S all" with the new version of rtl_433 and upload a new set of files.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660532700, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZQ6H4IQW3YOMCTYNN3R4H3UXANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

https://github.com/weetmuts/wmbusmeters can read the Sensus iPERL (iperl) water meter. If you tune rtl_433 to 868.8M you might be able to pick up the wmbus telegrams.

merbanan commented 4 years ago

The WH3080 Weather Station is found. But Msg type: 2 data is missing.

ime      : @0.218044s
model     : Fineoffset-WHx080                      Msg type  : 0             Station ID: 121
Battery   : 1            Temperature: 20.9 C       Humidity  : 72 %          Wind Direction: 270       Wind avg speed: 1.22
Wind gust : 2.45         Total rainfall: 67.8      Integrity : CRC
merbanan commented 4 years ago

I took a look but I could not find any signal that should represent the uv data (etc) from the weather sensor. Use the old version and run with -a -t to record signals with that. Then when you get a decode of the uv data attach that signal to this ticket.

Midimagic commented 4 years ago

How do I know when I have a decode as it does not display the decode on the screen ?

Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 22:00 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

I took a look but I could not find any signal that should represent the uv data (etc) from the weather sensor. Use the old version and run with -a -t to record signals with that. Then when you get a decode of the uv data attach that signal to this ticket.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660548553, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZQLIYEMNZ4SMNLGLCDR4ILQ7ANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

You can run "rtl_433 -r filename" to replay the signal. First make sure that the old rtl_433 actually picks up the signal the new version fails to pick up. Lets say the signal is transmitted once every minute. When that is confirmed you record signals for 2 minutes. Now you can be sure you recorded at least one transmission. After the 2 minutes have passed you maybe have 10 recordings. Now replay all recordings until you find the you are missing. When you found it upload it here.

Midimagic commented 4 years ago

Hi

Here is the file that has some missing data on the new version. Old version Input format: uint8 @0.000000s : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 121 Temperature: 15.8 C Humidity: 99 % Wind string: S Wind degrees: 180 Wind avg speed: 1.22 Wind gust: 2.45 Total rainfall: 67.8 Battery: OK @0.000000s : Fine Offset Electronics WH1080/WH3080 Weather Station Msg type: 0 Station ID: 121 Temperature: 15.8 C Humidity: 99 % Wind string: S Wind degrees: 180 Wind avg speed: 1.22 Wind gust: 2.45 Total rainfall: 67.8 Battery: OK Test mode file issued 1 packets

New version

time : 2020-07-19 12:40:16 model : Fineoffset-WHx080 Msg type : 0 Station ID: 121 Battery : 1 Temperature: 16.3 C Humidity : 97 % Wind Direction: 225 Wind avg speed: 2.45 Wind gust : 4.90 Total rainfall: 67.8 Integrity : CRC

time : 2020-07-19 12:40:16 model : Fineoffset-WHx080 Msg type : 0 Station ID: 121 Battery : 1 Temperature: 16.3 C Humidity : 97 % Wind Direction: 225 Wind avg speed: 2.45 Wind gust : 4.90 Total rainfall: 67.8 Integrity : CRC

The one with the UV seems to have stopped transmitting now.

Midi

From: Benjamin Larsson notifications@github.com Sent: 19 July 2020 11:02 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

You can run "rtl_433 -r filename" to replay the signal. First make sure that the old rtl_433 actually picks up the signal the new version fails to pick up. Lets say the signal is transmitted once every minute. When that is confirmed you record signals for 2 minutes. Now you can be sure you recorded at least one transmission. After the 2 minutes have passed you maybe have 10 recordings. Now replay all recordings until you find the you are missing. When you found it upload it here.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660626384, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZVFJE5ISOTTOKSWLC3R4LHGDANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

Ok, then there likely is no issue. Everything works as designed and the UV sensor has just stopped transmitting for some reason.

Midimagic commented 4 years ago

Hi

So you have taken the compass points out then ?

Midi

From: Benjamin Larsson notifications@github.com Sent: 19 July 2020 11:46 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

Ok, then there likely is no issue. Everything works as designed and the UV sensor has just stopped transmitting for some reason.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660631443, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZRXCF2IM7QGXNV35LDR4LMIFANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

Seems like that, I think we normalised with degrees:

https://github.com/merbanan/rtl_433/blob/master/src/devices/fineoffset_wh1080.c#L106

Midimagic commented 4 years ago

Hi Benjamin

Do you know of any PC software to decode wmbusmeters ? I had a look but I am far too old to follow all of that.

Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 21:34 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

https://github.com/weetmuts/wmbusmeters can read the Sensus iPERL (iperl) water meter. If you tune rtl_433 to 868.8M you might be able to pick up the wmbus telegrams.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660545690, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZTZJUX5ATEEFSP7G3TR4IIOHANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

rtl_433 can receive the wmbus telegrams. rtl_433 -f 868.8M should do the trick. To actually decoding the data the only free option I know of is wmbusmeters. But first see if you get any readings at all.

Midimagic commented 4 years ago

Hi

Ok thanks for all your help. Not sure I like degrees though, as there only seems to be 8 options to choose from as it does not show the true wind direction. I.m too old to have to work out what 270 degrees is.

Midi

From: Benjamin Larsson notifications@github.com Sent: 19 July 2020 12:00 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

rtl_433 can receive the wmbus telegrams. rtl_433 -f 868.8M should do the trick. To actually decoding the data the only free option I know of is wmbusmeters. But first see if you get any readings at all.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660633158, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZXJF234S6TXUGFG3QDR4LN7XANCNFSM4O7V2R7Q.

merbanan commented 4 years ago

Anyway AFAIK what has changes is the uv sensor has stopped transmitting and the output has changed a bit. No real issue could be found and thus I close this issue.

Midimagic commented 4 years ago

Thank you for all your help.

Midimagic commented 4 years ago

Hi

I have set the frequency to 868.500Mhz and I am receiving signals every couple of seconds. But alas, no decodes. I am using the -A command.

Many thanks Midi

From: Benjamin Larsson notifications@github.com Sent: 18 July 2020 21:34 To: merbanan/rtl_433 rtl_433@noreply.github.com Cc: Midimagic magic_midi@hotmail.com; Author author@noreply.github.com Subject: Re: [merbanan/rtl_433] Missing Fine Offset Electronics WH1080/WH3080 decode (#1435)

https://github.com/weetmuts/wmbusmeters can read the Sensus iPERL (iperl) water meter. If you tune rtl_433 to 868.8M you might be able to pick up the wmbus telegrams.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/merbanan/rtl_433/issues/1435#issuecomment-660545690, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQKKWZTZJUX5ATEEFSP7G3TR4IIOHANCNFSM4O7V2R7Q.