better support for leds on v1 (CC2652P2)

mercenaruss / uzg-firmware

Firmware for ZigStar UZG-01

GNU General Public License v3.0

73 stars 11 forks source link

better support for leds on v1 (CC2652P2) #35

Closed 532910 closed 6 months ago

532910 commented 8 months ago

BLUE / RED / YELLOW buttons are shown for v1, though they don't change anything

xyzroe commented 8 months ago

FW version?

532910 commented 8 months ago

the latest one, of course: ESP32 fw ver: 0.2.6 (prod-solo) ESP32 hw version: ESP32-D0WDQ6 CC2652P hw version: CC2652P2 CC2652P fw rev: 20230507

xyzroe commented 7 months ago

Could you show your board? Because we made tests and all works as expected. Only one idea that I have is your hardware have some differences with that one that I have.

532910 commented 7 months ago

Sure, I will show it! I bought it on Ali, exactly this one: https://aliexpress.com/item/1005004862412451.html?sku_id=12000032544271339

xyzroe commented 7 months ago

Please provide original aliexpress.com link , or exactly attach your photos

532910 commented 7 months ago

I will attach photos. It's a remote location, so I'll take them next week.

xyzroe commented 7 months ago

You are using HamGeek that is not original UZG. Maybe there are some differences from UZG schematics.

532910 commented 6 months ago

front back

mercenaruss commented 6 months ago

This is not a ZigStar Device. Hamgeek maybe

532910 commented 6 months ago

It is hamgeek. No plan to support it?

mercenaruss commented 6 months ago

No,sorry.

xyzroe commented 6 months ago

there is only a Zigbee LED in your photos. So there is nothing to work from buttons in the UI.

532910 commented 6 months ago

I meant, is it possible to detect board modification from the software and hide buttons in the UI?