Thank you for this nice firmware tool. Unfortunately, it does not seem to work.
I am using UZG-01 on HomeAssistant managed version (on Intel platform) so I don't have access to shell.
Model:
UZG-01
ESP32 Firmware ver:
0.1.5 (2023-09-06 12:01:02.723464)
ESP32 version:
ESP32-D0WD
ESP32 temperature:
35.78 °C
ESP32 frequency:
1 cores @ 160 MHz
ESP32 flash size:
4 Mb, external
ESP32 Free heap:
269 / 337 KiB
CC2652P version:
CC2652PP1FRGZR
CC2652P flash size:
352 Kb
Here is the log file:
Add-on: ZigStar TI CC2652P FW Flasher
ZigStar TI CC2652P firmware flasher add-on
Add-on version: 0.2.6
You are running the latest version of this add-on.
System: Debian GNU/Linux 12 (bookworm) (amd64 / qemux86-64)
Home Assistant Core: 2023.9.2
Home Assistant Supervisor: 2023.09.2
Please, share the above information when looking for help
or support in, e.g., GitHub, forums or the Discord chat.
s6-rc: info: service banner successfully started
s6-rc: info: service cc2652-flasher: starting
[21:02:49] INFO: Triggering Bootloader mode on 192.168.10.238
[21:03:01] INFO: Starting CC2652P flasher with socket://192.168.10.238:6638
Setting filename to /root/firmware.hex
Opening port socket://192.168.10.238:6638, baud 500000
Reading data from /root/firmware.hex
Your firmware looks like an Intel Hex file
Connecting to target...
ERROR: Timeout waiting for ACK/NACK after 'Synch (0x55 0x55)'
[21:03:12] INFO: cc2652-flasher-up script exited with code 1
s6-rc: warning: unable to start service cc2652-flasher: command exited 1
s6-rc: info: service banner: stopping
/run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information.
/run/s6/basedir/scripts/rc.init: fatal: stopping the container.
s6-rc: info: service banner successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped
URL NOT FOUND
Hello,
Thank you for this nice firmware tool. Unfortunately, it does not seem to work. I am using UZG-01 on HomeAssistant managed version (on Intel platform) so I don't have access to shell.
Here is the log file:
Add-on: ZigStar TI CC2652P FW Flasher ZigStar TI CC2652P firmware flasher add-on
Add-on version: 0.2.6 You are running the latest version of this add-on. System: Debian GNU/Linux 12 (bookworm) (amd64 / qemux86-64) Home Assistant Core: 2023.9.2 Home Assistant Supervisor: 2023.09.2
Please, share the above information when looking for help or support in, e.g., GitHub, forums or the Discord chat.
s6-rc: info: service banner successfully started s6-rc: info: service cc2652-flasher: starting [21:02:49] INFO: Triggering Bootloader mode on 192.168.10.238 [21:03:01] INFO: Starting CC2652P flasher with socket://192.168.10.238:6638 Setting filename to /root/firmware.hex Opening port socket://192.168.10.238:6638, baud 500000 Reading data from /root/firmware.hex Your firmware looks like an Intel Hex file Connecting to target... ERROR: Timeout waiting for ACK/NACK after 'Synch (0x55 0x55)' [21:03:12] INFO: cc2652-flasher-up script exited with code 1 s6-rc: warning: unable to start service cc2652-flasher: command exited 1 s6-rc: info: service banner: stopping /run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information. /run/s6/basedir/scripts/rc.init: fatal: stopping the container. s6-rc: info: service banner successfully stopped s6-rc: info: service legacy-cont-init: stopping s6-rc: info: service legacy-cont-init successfully stopped s6-rc: info: service fix-attrs: stopping s6-rc: info: service fix-attrs successfully stopped s6-rc: info: service s6rc-oneshot-runner: stopping s6-rc: info: service s6rc-oneshot-runner successfully stopped URL NOT FOUND