search

merlinlikethewizard / Mastermine

A fully automated strip mining network for ComputerCraft turtles!
MIT License
83 stars 20 forks source link

Turtles not moving once activated #8

Closed realares0414 closed 3 years ago

realares0414 commented 3 years ago

when I place the turtles down and run the turtle command it only half works, the turtles turn, move to calibrate and then return to where they were, going idle immediately after.

here's a clip of what happened and me following your suggestions for some other issues: https://drive.google.com/file/d/1805ktr8bfg8NM_RNYkg0mYn6EbhYvyOB/view?usp=sharing

merlinlikethewizard commented 3 years ago

I see you closed the issue, did you solve the problem? I'm watching what you uploaded and I have to say I'm still working on figuring out what could be going wrong.

realares0414 commented 3 years ago

Yes, I did find out how to fix the issue, I just had to break and replace the turtle and it worked perfectly.

On Wed, Jan 13, 2021 at 11:02 PM MerlinLikeTheWizard < notifications@github.com> wrote:

I see you closed the issue, did you solve the problem? I'm watching what you uploaded and I have to say I'm still working on figuring out what could be going wrong.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/merlinlikethewizard/Mastermine/issues/8#issuecomment-759946832, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARZZMNWUUAKE3FAJ2IDOXXLSZ2CGPANCNFSM4WBUQEQQ .