Closed Dorn8010 closed 2 months ago
fixed in 2.3.6 and newer
Tried FW 2.3.6.7a3570a on Heltec V3. Still loosing its short and long name and fixed pos. Connected to a solar source with internal battery (2000mAh). After several restarts the name and pos are gone.
Sounds like you might have a hardware flash issue. I've seen this happen on NRF52 devices with dying flash.
Checked this issue on 2.3.6. with two other HeltecV3 boards. Same problem. But only after many restarts in a row. Losing ID (Long and Short) and the fixed position coordinates. The rest is still maintained e.g. Groups.
Category
Other
Hardware
Heltec V3
Firmware Version
2.3.4
Description
Connected to a solar source, when the power is lost the device losses its last messages and sometimes its ID (long and short).
Relevant log output
No response