Open roha-github opened 1 month ago
Device: Heltec V3 Firmware: 2.3.9.f06c56a Alpha
Error: E NimBLEAdvertising: Error enabling advertising; rc=30, Expected: no error message regarding BLE during shutdown
Error: E (29446) RTCIO: rtc_gpio_isolate(171): RTCIO number error E (29447) RTCIO: rtc_gpio_isolate(171): RTCIO number error E (29447) RTCIO: rtc_gpio_isolate(171): RTCIO number error Expected: no error message regarding GPIO's after shutdown
Similar error messages with Heltec V3 plus BLE error.
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x28 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x44c
load:0x403c9700,len:0xbe4
load:0x403cc700,len:0x2a38
entry 0x403c98d4
E (353) esp_core_dump_flash: No core dump partition found!
E (353) esp_core_dump_flash: No core dump partition found!
▒▒@INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (491520/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (57 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (99 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (314 Bytes)
DEBUG | ??:??:?? 0 /prefs/module.proto (107 Bytes)
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0 /static/index-BMhLjTmL.css.gz (16270 Bytes)
DEBUG | ??:??:?? 0 /static/index-Bt2MYVVB.js.gz (203021 Bytes)
DEBUG | ??:??:?? 0 /static/index-CGqDWSD_.js.gz (348 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (548 Bytes)
DEBUG | ??:??:?? 0 /static/maplibre-gl-BXZZhNda.js.gz (210451 Bytes)
DEBUG | ??:??:?? 0 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 0 /static/site.webmanifest.gz (197 Bytes)
[ 717][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=41 scl=42 freq=100000
[ 719][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=17 scl=18 freq=100000
DEBUG | ??:??:?? 0 Using analog input 1 for battery level
INFO | ??:??:?? 0 ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse
INFO | ??:??:?? 0 Scanning for i2c devices...
[ 751][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 2
[ 781][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 0 I2C device found at address 0x3c
INFO | ??:??:?? 0 ssd1306 display found
INFO | ??:??:?? 0 ssd1306 display found
DEBUG | ??:??:?? 0 0x3 subtype probed in 2 tries
INFO | ??:??:?? 0 1 I2C devices found
DEBUG | ??:??:?? 0 acc_info = 0
INFO | ??:??:?? 0 Meshtastic hwvendor=43, swver=2.3.9.f06c56a
DEBUG | ??:??:?? 0 Setting random seed 2487372047
DEBUG | ??:??:?? 0 Total heap: 293720
DEBUG | ??:??:?? 0 Free heap: 257220
DEBUG | ??:??:?? 0 Total PSRAM: 0
DEBUG | ??:??:?? 0 Free PSRAM: 0
DEBUG | ??:??:?? 0 NVS: UsedEntries 86, FreeEntries 544, AllEntries 630, NameSpaces 3
DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 0 Number of Device Reboots: 4
DEBUG | ??:??:?? 0 OTA firmware version 0.2.1.ceca52c
INFO | ??:??:?? 0 Initializing NodeDB
INFO | ??:??:?? 0 Loading /prefs/db.proto
INFO | ??:??:?? 0 Loaded /prefs/db.proto successfully
INFO | ??:??:?? 0 Loaded saved devicestate version 22, with nodecount: 1
INFO | ??:??:?? 0 Loading /prefs/config.proto
INFO | ??:??:?? 0 Loaded /prefs/config.proto successfully
INFO | ??:??:?? 0 Loaded saved config version 22
INFO | ??:??:?? 0 Loading /prefs/module.proto
INFO | ??:??:?? 0 Loaded /prefs/module.proto successfully
INFO | ??:??:?? 0 Loaded saved moduleConfig version 22
INFO | ??:??:?? 1 Loading /prefs/channels.proto
INFO | ??:??:?? 1 Loaded /prefs/channels.proto successfully
INFO | ??:??:?? 1 Loaded saved channelFile version 22
[ 1023][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 1 File /oem/oem.proto not found
DEBUG | ??:??:?? 1 cleanupMeshDB purged 0 entries
DEBUG | ??:??:?? 1 Using nodenum 0xda629444
DEBUG | ??:??:?? 1 Number of Device Reboots: 4
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO | ??:??:?? 1 Wanted region 3, using EU_868
INFO | ??:??:?? 1 Saving /prefs/db.proto
DEBUG | ??:??:?? 1 Using GPIO00 for button
DEBUG | ??:??:?? 1 SPI.begin(SCK=9, MISO=11, MOSI=10, NSS=8)
DEBUG | ??:??:?? 1 Set Timezone to GMT0
DEBUG | ??:??:?? 1 Read RTC time as 0
DEBUG | ??:??:?? 1 NeighborInfoModule is disabled
INFO | ??:??:?? 1 External Notification Module Disabled
INFO | ??:??:?? 1 Turning on screen
DEBUG | ??:??:?? 1 Module wants a UI Frame
DEBUG | ??:??:?? 1 SX126xInterface(cs=8, irq=14, rst=12, busy=13)
DEBUG | ??:??:?? 1 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO | ??:??:?? 1 Starting meshradio init...
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 1 Radio freq=869.525, config.lora.frequency_offset=0.000
INFO | ??:??:?? 1 Set radio: region=EU_868, name=LongFast, config=0, ch=0, power=27
INFO | ??:??:?? 1 Radio myRegion->freqStart -> myRegion->freqEnd: 869.400024 -> 869.650024 (0.250000 mhz)
INFO | ??:??:?? 1 Radio myRegion->numChannels: 1 x 250.000kHz
INFO | ??:??:?? 1 Radio channel_num: 1
INFO | ??:??:?? 1 Radio frequency: 869.525024
INFO | ??:??:?? 1 Slot time: 42 msec
INFO | ??:??:?? 1 Set radio: final power level=22
INFO | ??:??:?? 1 SX126x init result 0
INFO | ??:??:?? 1 Frequency set to 869.525024
INFO | ??:??:?? 1 Bandwidth set to 250.000000
INFO | ??:??:?? 1 Power output set to 22
DEBUG | ??:??:?? 1 Current limit set to 140.000000
DEBUG | ??:??:?? 1 Current limit set result 0
DEBUG | ??:??:?? 1 Setting DIO2 as RF switch
DEBUG | ??:??:?? 1 SX126X_RXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 SX126X_TXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 Using MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
INFO | ??:??:?? 1 Set RX gain to boosted mode; result: 0
INFO | ??:??:?? 1 SX1262 Radio init succeeded, using SX1262 radio
INFO | ??:??:?? 1 Not using WIFI
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 1 LoRA bitrate = 118.500000 bytes / sec
INFO | ??:??:?? 1 PowerFSM init, USB power=1
DEBUG | ??:??:?? 1 Enter state: BOOT
[ 1431][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 6 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 1 [Power] Battery: usbPower=0, isCharging=0, batMv=3100, batPct=0
DEBUG | ??:??:?? 1 [Screen] Screen: Started...
INFO | ??:??:?? 1 [RangeTestModule] Range Test Module - Disabled
INFO | ??:??:?? 4 [PowerFSM] Loss of power in Powered
INFO | ??:??:?? 4 [PowerFSM] Loss of power in Powered
INFO | ??:??:?? 4 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | ??:??:?? 4 [PowerFSM] Enter state: ON
INFO | ??:??:?? 6 [Screen] Done with boot screen...
DEBUG | ??:??:?? 6 [Screen] showing standard frames
DEBUG | ??:??:?? 6 [Screen] Showing 0 module frames
DEBUG | ??:??:?? 6 [Screen] Total frame count: 103
DEBUG | ??:??:?? 6 [Screen] Added modules. numframes: 0
DEBUG | ??:??:?? 6 [Screen] Finished building frames. numframes: 2
INFO | ??:??:?? 6 BLE authentication complete
INFO | ??:??:?? 8 From Radio onread
INFO | ??:??:?? 8 To Radio onwrite
INFO | ??:??:?? 8 Client wants config, nonce=14
INFO | ??:??:?? 8 Starting API client config
INFO | ??:??:?? 8 From Radio onread
INFO | ??:??:?? 8 getFromRadio=STATE_SEND_MY_INFO
DEBUG | ??:??:?? 8 encoding toPhone packet to phone variant=3, 14 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_METADATA
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=13, 30 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 9 nodeinfo: num=0xda629444, lastseen=0, id=!da629444, name=Meshtastic 9444
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=4, 58 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 9 Done sending nodeinfos
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 13 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 9 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 9 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 20 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 17 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 29 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 7 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 19 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=5, 10 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=9, 60 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 13 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 7 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 13 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 8 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_COMPLETE_ID
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=7, 2 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=11, 6 bytes
INFO | ??:??:?? 12 From Radio onread
DEBUG | ??:??:?? 21 [Power] Battery: usbPower=0, isCharging=0, batMv=4067, batPct=91
INFO | ??:??:?? 23 To Radio onwrite
DEBUG | ??:??:?? 23 PACKET FROM PHONE (id=0xd3e8f203 fr=0x00 to=0x44, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 23 Enqueued local (id=0xd3e8f203 fr=0x00 to=0x44, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
INFO | ??:??:?? 23 Telling client we have new packets 2
INFO | ??:??:?? 23 BLE notify fromNum
DEBUG | ??:??:?? 23 [Router] Add packet record (id=0xd3e8f203 fr=0x00 to=0x44, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 23 [Router] handleReceived(REMOTE) (id=0xd3e8f203 fr=0x00 to=0x44, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 23 [Router] Module 'Admin' wantsPacket=1
INFO | ??:??:?? 23 [Router] Received Admin from=0x0, id=0xd3e8f203, portnum=6, payloadlen=3
INFO | ??:??:?? 23 [Router] Shutdown in 5 seconds
DEBUG | ??:??:?? 23 [Router] Module 'Admin' considered
DEBUG | ??:??:?? 23 [Router] Module 'routing' wantsPacket=1
INFO | ??:??:?? 23 [Router] Received routing from=0x0, id=0xd3e8f203, portnum=6, payloadlen=3
INFO | ??:??:?? 23 [Router] From Radio onread
DEBUG | ??:??:?? 23 [Router] Routing sniffing (id=0xd3e8f203 fr=0x00 to=0x44, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
INFO | ??:??:?? 23 [Router] getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 23 [Router] Initial packet id 871297958, numPacketId 4294967295
DEBUG | ??:??:?? 23 [Router] encoding toPhone packet to phone variant=11, 12 bytes
DEBUG | ??:??:?? 23 [Router] Enqueued local (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Router] Module 'routing' considered
DEBUG | ??:??:?? 23 [Router] Rx someone rebroadcasting for us (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Router] didn't find pending packet
DEBUG | ??:??:?? 23 [Router] Add packet record (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Router] handleReceived(REMOTE) (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
INFO | ??:??:?? 23 [Router] From Radio onread
DEBUG | ??:??:?? 23 [Router] Module 'canned' wantsPacket=1
DEBUG | ??:??:?? 23 [Router] showing standard frames
DEBUG | ??:??:?? 23 [Router] Showing 0 module frames
DEBUG | ??:??:?? 23 [Router] Total frame count: 103
DEBUG | ??:??:?? 23 [Router] Added modules. numframes: 0
DEBUG | ??:??:?? 23 [Router] Finished building frames. numframes: 2
DEBUG | ??:??:?? 23 [Router] Module 'canned' considered
DEBUG | ??:??:?? 23 [Router] Module 'routing' wantsPacket=1
INFO | ??:??:?? 23 [Router] Received routing from=0xda629444, id=0x33eef3a8, portnum=5, payloadlen=2
DEBUG | ??:??:?? 23 [Router] Routing sniffing (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Router] Received an ack for 0xd3e8f203, stopping retransmissions
DEBUG | ??:??:?? 23 [Router] Delivering rx packet (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Router] Update DB node 0xda629444, rx_time=0
DEBUG | ??:??:?? 23 [Router] Forwarding to phone (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Router] Module 'routing' considered
INFO | ??:??:?? 23 Telling client we have new packets 3
INFO | ??:??:?? 23 BLE notify fromNum
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
INFO | ??:??:?? 23 [Screen] From Radio onread
INFO | ??:??:?? 23 [Screen] getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
DEBUG | ??:??:?? 23 [Screen] phone downloaded packet (id=0x33eef3a8 fr=0x44 to=0x44, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d3e8f203 priority=120)
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
DEBUG | ??:??:?? 23 [Screen] encoding toPhone packet to phone variant=2, 34 bytes
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
INFO | ??:??:?? 23 [Screen] From Radio onread
DEBUG | ??:??:?? 23 [Screen] showing shutdown screen
DEBUG | ??:??:?? 28 [Screen] showing shutdown screen
INFO | ??:??:?? 28 Shutting down from admin command
INFO | ??:??:?? 28 Shutting down
INFO | ??:??:?? 28 Entering deep sleep forever
INFO | ??:??:?? 28 Disable bluetooth until reboot
INFO | ??:??:?? 28 BLE disconnect
E NimBLEAdvertising: Error enabling advertising; rc=30,
DEBUG | ??:??:?? 28 SX126x entering sleep mode (FIXME, don't keep config)
INFO | ??:??:?? 28 Turning off screen
INFO | ??:??:?? 28 Saving /prefs/db.proto
INFO | ??:??:?? 29 Saving /prefs/config.proto
INFO | ??:??:?? 29 Saving /prefs/module.proto
INFO | ??:??:?? 29 Saving /prefs/channels.proto
E (29446) RTCIO: rtc_gpio_isolate(171): RTCIO number error
E (29447) RTCIO: rtc_gpio_isolate(171): RTCIO number error
E (29447) RTCIO: rtc_gpio_isolate(171): RTCIO number error
Device: Heltec Wireless Stick V3 Firmware: 2.3.9.f06c56a Alpha
Error: E NimBLEAdvertising: Error enabling advertising; rc=30, Expected: no error message regarding BLE during shutdown
Error: E (25284) RTCIO: rtc_gpio_isolate(171): RTCIO number error E (25285) RTCIO: rtc_gpio_isolate(171): RTCIO number error E (25285) RTCIO: rtc_gpio_isolate(171): RTCIO number error Expected: no error message regarding GPIO's after shutdown
Similar error messages with Heltec Wireless Stick V3 and BLE error.
▒ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x4213b5f2
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x44c
load:0x403c9700,len:0xbe4
load:0x403cc700,len:0x2a38
entry 0x403c98d4
E (348) esp_core_dump_flash: No core dump partition found!
E (348) esp_core_dump_flash: No core dump partition found!
▒▒@INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (491520/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (57 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (101 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (394 Bytes)
DEBUG | ??:??:?? 0 /prefs/module.proto (107 Bytes)
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0 /static/index-BMhLjTmL.css.gz (16270 Bytes)
DEBUG | ??:??:?? 0 /static/index-Bt2MYVVB.js.gz (203021 Bytes)
DEBUG | ??:??:?? 0 /static/index-CGqDWSD_.js.gz (348 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (548 Bytes)
DEBUG | ??:??:?? 0 /static/maplibre-gl-BXZZhNda.js.gz (210451 Bytes)
DEBUG | ??:??:?? 0 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 0 /static/site.webmanifest.gz (197 Bytes)
[ 712][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=41 scl=42 freq=100000
DEBUG | ??:??:?? 0 Using analog input 1 for battery level
INFO | ??:??:?? 0 ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse
INFO | ??:??:?? 0 Scanning for i2c devices...
[ 738][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 1
INFO | ??:??:?? 0 No I2C devices found
DEBUG | ??:??:?? 0 acc_info = 0
INFO | ??:??:?? 0 Meshtastic hwvendor=44, swver=2.3.9.f06c56a
DEBUG | ??:??:?? 0 Setting random seed 96485043
DEBUG | ??:??:?? 0 Total heap: 295216
DEBUG | ??:??:?? 0 Free heap: 260168
DEBUG | ??:??:?? 0 Total PSRAM: 0
DEBUG | ??:??:?? 0 Free PSRAM: 0
DEBUG | ??:??:?? 0 NVS: UsedEntries 86, FreeEntries 544, AllEntries 630, NameSpaces 3
DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 0 Number of Device Reboots: 3
DEBUG | ??:??:?? 0 OTA firmware version 0.2.1.ceca52c
INFO | ??:??:?? 0 Initializing NodeDB
INFO | ??:??:?? 0 Loading /prefs/db.proto
INFO | ??:??:?? 0 Loaded /prefs/db.proto successfully
INFO | ??:??:?? 0 Loaded saved devicestate version 22, with nodecount: 2
INFO | ??:??:?? 0 Loading /prefs/config.proto
INFO | ??:??:?? 0 Loaded /prefs/config.proto successfully
INFO | ??:??:?? 0 Loaded saved config version 22
INFO | ??:??:?? 0 Loading /prefs/module.proto
INFO | ??:??:?? 0 Loaded /prefs/module.proto successfully
INFO | ??:??:?? 0 Loaded saved moduleConfig version 22
INFO | ??:??:?? 0 Loading /prefs/channels.proto
INFO | ??:??:?? 0 Loaded /prefs/channels.proto successfully
INFO | ??:??:?? 0 Loaded saved channelFile version 22
[ 980][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 0 File /oem/oem.proto not found
DEBUG | ??:??:?? 0 cleanupMeshDB purged 0 entries
DEBUG | ??:??:?? 0 Using nodenum 0x336654bc
DEBUG | ??:??:?? 0 Number of Device Reboots: 3
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO | ??:??:?? 1 Wanted region 3, using EU_868
INFO | ??:??:?? 1 Saving /prefs/db.proto
DEBUG | ??:??:?? 1 Using GPIO00 for button
DEBUG | ??:??:?? 1 SPI.begin(SCK=9, MISO=11, MOSI=10, NSS=8)
DEBUG | ??:??:?? 1 Set Timezone to GMT0
DEBUG | ??:??:?? 1 Read RTC time as 88
DEBUG | ??:??:?? 1 NeighborInfoModule is disabled
INFO | ??:??:?? 1 External Notification Module Disabled
DEBUG | ??:??:?? 1 SX126xInterface(cs=8, irq=14, rst=12, busy=13)
DEBUG | ??:??:?? 1 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO | ??:??:?? 1 Starting meshradio init...
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 1 Radio freq=869.525, config.lora.frequency_offset=0.000
INFO | ??:??:?? 1 Set radio: region=EU_868, name=LongFast, config=0, ch=0, power=27
INFO | ??:??:?? 1 Radio myRegion->freqStart -> myRegion->freqEnd: 869.400024 -> 869.650024 (0.250000 mhz)
INFO | ??:??:?? 1 Radio myRegion->numChannels: 1 x 250.000kHz
INFO | ??:??:?? 1 Radio channel_num: 1
INFO | ??:??:?? 1 Radio frequency: 869.525024
INFO | ??:??:?? 1 Slot time: 42 msec
INFO | ??:??:?? 1 Set radio: final power level=22
INFO | ??:??:?? 1 SX126x init result 0
INFO | ??:??:?? 1 Frequency set to 869.525024
INFO | ??:??:?? 1 Bandwidth set to 250.000000
INFO | ??:??:?? 1 Power output set to 22
DEBUG | ??:??:?? 1 Current limit set to 140.000000
DEBUG | ??:??:?? 1 Current limit set result 0
DEBUG | ??:??:?? 1 Setting DIO2 as RF switch
DEBUG | ??:??:?? 1 SX126X_RXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 SX126X_TXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 Using MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
INFO | ??:??:?? 1 Set RX gain to boosted mode; result: 0
INFO | ??:??:?? 1 SX1262 Radio init succeeded, using SX1262 radio
INFO | ??:??:?? 1 Not using WIFI
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 1 LoRA bitrate = 118.500000 bytes / sec
INFO | ??:??:?? 1 PowerFSM init, USB power=1
DEBUG | ??:??:?? 1 Enter state: BOOT
[ 1357][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 6 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 1 [Power] Battery: usbPower=0, isCharging=0, batMv=3100, batPct=0
INFO | ??:??:?? 1 [RangeTestModule] Range Test Module - Disabled
INFO | ??:??:?? 4 [PowerFSM] Loss of power in Powered
INFO | ??:??:?? 4 [PowerFSM] Loss of power in Powered
INFO | ??:??:?? 4 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | ??:??:?? 4 [PowerFSM] Enter state: ON
INFO | ??:??:?? 8 BLE authentication complete
INFO | ??:??:?? 9 From Radio onread
INFO | ??:??:?? 9 To Radio onwrite
INFO | ??:??:?? 9 Client wants config, nonce=5
INFO | ??:??:?? 9 Starting API client config
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_MY_INFO
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=3, 14 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_METADATA
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=13, 30 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 10 nodeinfo: num=0x336654bc, lastseen=0, id=!336654bc, name=Meshtastic 54bc
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=4, 69 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 10 nodeinfo: num=0xe0d392b0, lastseen=0, id=!e0d392b0, name=bit.ly/mesh_dRH5#Robert@Home
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=4, 69 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_NODEINFO
INFO | ??:??:?? 10 Done sending nodeinfos
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 13 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 10 From Radio onread
INFO | ??:??:?? 10 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 10 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CHANNELS
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=10, 6 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 9 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 20 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 17 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 29 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 7 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 19 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_CONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=5, 12 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 60 bytes
INFO | ??:??:?? 11 From Radio onread
INFO | ??:??:?? 11 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 11 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 13 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 7 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 13 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 8 bytes
INFO | ??:??:?? 12 From Radio onread
INFO | ??:??:?? 12 getFromRadio=STATE_SEND_MODULECONFIG
DEBUG | ??:??:?? 12 encoding toPhone packet to phone variant=9, 4 bytes
INFO | ??:??:?? 13 From Radio onread
INFO | ??:??:?? 13 getFromRadio=STATE_SEND_COMPLETE_ID
DEBUG | ??:??:?? 13 encoding toPhone packet to phone variant=7, 2 bytes
INFO | ??:??:?? 13 From Radio onread
INFO | ??:??:?? 13 getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 13 encoding toPhone packet to phone variant=11, 6 bytes
INFO | ??:??:?? 13 From Radio onread
INFO | ??:??:?? 18 To Radio onwrite
DEBUG | ??:??:?? 18 PACKET FROM PHONE (id=0x92028c22 fr=0x00 to=0xbc, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 18 Enqueued local (id=0x92028c22 fr=0x00 to=0xbc, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
INFO | ??:??:?? 18 Telling client we have new packets 2
INFO | ??:??:?? 19 BLE notify fromNum
DEBUG | ??:??:?? 19 [Router] Add packet record (id=0x92028c22 fr=0x00 to=0xbc, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 19 [Router] handleReceived(REMOTE) (id=0x92028c22 fr=0x00 to=0xbc, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 19 [Router] Module 'Admin' wantsPacket=1
INFO | ??:??:?? 19 [Router] Received Admin from=0x0, id=0x92028c22, portnum=6, payloadlen=3
INFO | ??:??:?? 19 [Router] Shutdown in 5 seconds
DEBUG | ??:??:?? 19 [Router] Module 'Admin' considered
DEBUG | ??:??:?? 19 [Router] Module 'routing' wantsPacket=1
INFO | ??:??:?? 19 [Router] Received routing from=0x0, id=0x92028c22, portnum=6, payloadlen=3
INFO | ??:??:?? 19 [Router] From Radio onread
DEBUG | ??:??:?? 19 [Router] Routing sniffing (id=0x92028c22 fr=0x00 to=0xbc, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
INFO | ??:??:?? 19 [Router] getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 19 [Router] Initial packet id 448020860, numPacketId 4294967295
DEBUG | ??:??:?? 19 [Router] encoding toPhone packet to phone variant=11, 12 bytes
DEBUG | ??:??:?? 19 [Router] Enqueued local (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 [Router] Module 'routing' considered
DEBUG | ??:??:?? 19 [Router] Rx someone rebroadcasting for us (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 [Router] didn't find pending packet
DEBUG | ??:??:?? 19 [Router] Add packet record (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 [Router] handleReceived(REMOTE) (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
INFO | ??:??:?? 19 [Router] From Radio onread
DEBUG | ??:??:?? 19 [Router] Module 'routing' wantsPacket=1
INFO | ??:??:?? 19 [Router] Received routing from=0x336654bc, id=0x1ab4417e, portnum=5, payloadlen=2
DEBUG | ??:??:?? 19 [Router] Routing sniffing (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 [Router] Received an ack for 0x92028c22, stopping retransmissions
DEBUG | ??:??:?? 19 [Router] Delivering rx packet (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 [Router] Update DB node 0x336654bc, rx_time=0
DEBUG | ??:??:?? 19 [Router] Forwarding to phone (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 [Router] Module 'routing' considered
INFO | ??:??:?? 19 Telling client we have new packets 3
INFO | ??:??:?? 19 BLE notify fromNum
INFO | ??:??:?? 19 From Radio onread
INFO | ??:??:?? 19 getFromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 19 phone downloaded packet (id=0x1ab4417e fr=0xbc to=0xbc, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=92028c22 priority=120)
DEBUG | ??:??:?? 19 encoding toPhone packet to phone variant=2, 34 bytes
INFO | ??:??:?? 19 From Radio onread
DEBUG | ??:??:?? 21 [Power] Battery: usbPower=0, isCharging=0, batMv=4047, batPct=89
INFO | ??:??:?? 24 Shutting down from admin command
INFO | ??:??:?? 24 Shutting down
INFO | ??:??:?? 24 Entering deep sleep forever
INFO | ??:??:?? 24 Disable bluetooth until reboot
INFO | ??:??:?? 24 BLE disconnect
E NimBLEAdvertising: Error enabling advertising; rc=30,
DEBUG | ??:??:?? 24 SX126x entering sleep mode (FIXME, don't keep config)
INFO | ??:??:?? 24 Saving /prefs/db.proto
INFO | ??:??:?? 24 Saving /prefs/config.proto
INFO | ??:??:?? 25 Saving /prefs/module.proto
INFO | ??:??:?? 25 Saving /prefs/channels.proto
E (25284) RTCIO: rtc_gpio_isolate(171): RTCIO number error
E (25285) RTCIO: rtc_gpio_isolate(171): RTCIO number error
E (25285) RTCIO: rtc_gpio_isolate(171): RTCIO number error
This is no longer a supported device
@garthvh The error occurs in several models. Should I post separate bugs in future?
Yes, the Heltec V2 are older, but the power consumption with active ESP32 is only 70mA compared to the Heltect V3 with 108mA. Do you mean Heltec V3 is outdated?
It will get closed if logged against an unsupported device, so if it happens on a supported one that would be better.
Category
Hardware Compatibility
Hardware
Heltec v2.1
Firmware Version
2.3.9.f06c56a
Description
Device: Heltec V2.1 Firmware: 2.3.9.f06c56a Alpha
Error: E (29334) gpio: gpio_set_level(226): GPIO output gpio_num error Expected: no error message regarding GPIO's after shutdown
During shutdown there is an error message regarding invalid IO numbers. It is unclear whether this could have negative effects after the resume. This error message does not appear on other devices.
Relevant log output