meshtastic / firmware

Meshtastic device firmware
https://meshtastic.org
GNU General Public License v3.0
3.65k stars 917 forks source link

boot message reports: Meshtastic swver=0.0.0, hwver=1.0 - US #92

Closed spattinson closed 4 years ago

spattinson commented 4 years ago

Even if you are set to EU433, I think this is legacy from the old method of selecting hardware and band in configuration.h It may be a good idea to display which band and hardware is selected in boot messages and on the screen in case someone flashed the wrong firmware. All the sx1276/7/8/9 are advertised to operate over a wide frequency range, I assume that they may operate suboptimally outside of the intended frequency, though its not clear from what I seen scanning semtech datasheet.

geeksville commented 4 years ago

This issue has been mentioned on Meshtastic. There might be relevant details there:

https://meshtastic.discourse.group/t/ttgo-t-beam-gps/98/15

geeksville commented 4 years ago

This issue has been mentioned on Meshtastic. There might be relevant details there:

https://meshtastic.discourse.group/t/ttgo-t-beam-gps/98/23