How to add information on jitters & packet lost to visualization?

[SerhiiZahuba]

In sip-explore, I see that there is a lot of information about the call, such as packets_lost \ ia_jitter and others. But there is no such information in the review of the call itself (graph).

{"sender_information":{"ntp_timestamp_sec":3904805878,"ntp_timestamp_usec":579257856,"rtp_timestamp":245328,"packets":1450,"octets":29000},"ssrc":1899301537,"type":202,"report_count":1,"report_blocks":[{"source_ssrc":3817976455,"fraction_lost":0,"packets_lost":4,"highest_seq_no":22941,"ia_jitter":35,"lsr":0,"dlsr":0}],"report_blocks_xr":{"type":0,"id":0,"fraction_lost":0,"fraction_discard":0,"burst_density":0,"gap_density":0,"burst_duration":0,"gap_duration":0,"round_trip_delay":0,"end_system_delay":0},"sdes_ssrc":1899301537}

[lmangani]

Hello @SerhiiZahuba the widget is intended as a generic flow component and not exclusive to the homer usecase alone.

This widget alone is a "looking glass" and displays all the data in its raw format and mostly useful with filters. Per-session media graph visualization will be done using Grafana panels + correlation and its already possible, but not yet visually automated anywhere. We count on completing this by the end of this year. Feel free to submit any ideas or concepts.

Edit: I assume you saw the other dashboards where the RTCP data is being visualized already - without tag correlation

[SerhiiZahuba]

If you are talking about these, yes. But I see almost all of them are empty.

Display data is available only in call-flow sip-explore.

In homer-stats I see an error, other panels are empty.

[lmangani]

It seems you have no data to show. The issue might be with the ingestion stage.

[SerhiiZahuba]

Strange. If you have the opportunity? Can you tell me where to look for this problem? On the asterisk side, I use the usual heplify agent. I have the old homer7 running in a container as well. I turned off the old container and turned on the new homer10 with your dashboard - that is, all data is received on port 9060 and in the main dashboard it is displayed, but in others, for example, CDR Search, it is empty.

[lmangani]

I would suggest running our homer10 demo which should produce a working setup with synthetic results to learn how it works and/or find the difference with your setup.