search

mgschwan / blensor

Blender Sensor Simulation
www.blensor.org
Other
178 stars 47 forks source link

Blensor crash when starting #16

Closed frederico00 closed 9 years ago

frederico00 commented 9 years ago

Hey,

I just compiled from source blensor, and when i try to start it crah.

Writing: /tmp/blender.crash.txt

Blender 2.74 (sub 1), Unknown revision

backtrace

./blender(BLI_system_backtrace+0x1d) [0x1112b5d] ./blender() [0x83ae93] /lib/x86_64-linux-gnu/libc.so.6(+0x36d40) [0x7f62cb76bd40] ./blender() [0xa1a5d6] ./blender(ui_draw_but+0x408) [0xa1ed28] ./blender(UI_block_draw+0x1aa) [0x9dac8a] ./blender(ED_region_header+0x1a8) [0xad3ca8] ./blender(ED_region_do_draw+0xa55) [0xad2875] ./blender(wm_draw_update+0x58c) [0x84096c] ./blender(WM_main+0x28) [0x83cea8] ./blender(main+0xd6f) [0x82e50f] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f62cb756ec5] ./blender() [0x83a8f7]

any idea?

mgschwan commented 9 years ago

Thank you for the report. I've commited a fix for the crash on startup issue.

The reason is a corrupt startup file in the blensor trunk. It seems to affect all versions of Blensor starting with 1.16rc1. A temporary workaround is to download the official blender (if you are using Blensor 1.16 then it is Blender 2.72 and if you are using the current trunk then it is Blender 2.74), start it and save an empty startup file. The next time you start blensor it will use the new startup file instead of the one that is compiled in.

This issue should now be fixed

frederico00 commented 9 years ago

Sorry, can you be more precise with what i need to do?

Thanks in advance

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-21 9:06 GMT+01:00 Michael Gschwandtner notifications@github.com:

Thank you for the report. I've commited a fix for the crash on startup issue.

The reason is a corrupt startup file in the blensor trunk. It seems to affect all versions of Blensor starting with 1.16rc1. A temporary workaround is to download the official blender (if you are using Blensor 1.16 then it is Blender 2.72 and if you are using the current trunk then it is Blender 2.74), start it and save an empty startup file. The next time you start blensor it will use the new startup file instead of the one that is compiled in.

This issue should now be fixed

— Reply to this email directly or view it on GitHub https://github.com/mgschwan/blensor/issues/16#issuecomment-94693926.

frederico00 commented 9 years ago

Dear Michael,

I saw that you release a new binary version for linux, and it is working fine.

My problem is that you change the settings for the TOF camera. Before i was simulating a TOF camera, and i was able to have good results for the recognition using PCL. Now i have somo more settings(focal lenght and 2 more ....) for the tof camera, and i can´t get the same results.

Is it possible to have the holder binary version for linux (then i create a start up file)? Or maybe the values of those settings to equalize the previus version ...

In windows when i try to write/run a script the blensor crashes ..... In linux i can't have the same results....

Thanks in advance.

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-26 15:46 GMT+01:00 Frederico Cabeço cabeco.frederico@gmail.com:

Sorry, can you be more precise with what i need to do?

Thanks in advance

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-21 9:06 GMT+01:00 Michael Gschwandtner notifications@github.com:

Thank you for the report. I've commited a fix for the crash on startup issue.

The reason is a corrupt startup file in the blensor trunk. It seems to affect all versions of Blensor starting with 1.16rc1. A temporary workaround is to download the official blender (if you are using Blensor 1.16 then it is Blender 2.72 and if you are using the current trunk then it is Blender 2.74), start it and save an empty startup file. The next time you start blensor it will use the new startup file instead of the one that is compiled in.

This issue should now be fixed

— Reply to this email directly or view it on GitHub https://github.com/mgschwan/blensor/issues/16#issuecomment-94693926.

mgschwan commented 9 years ago

Dear Frederico,

I was afraid that the change to the TOF code would cause some compatibility issues.

Can you send me a blend file from an earlier version where it was still working properly.

The problem with the old TOF code was that there was a bug due to which the field of view could not be changed.

Best regards

Michael

Am 02.06.2015 10:33, schrieb frederico00:

Dear Michael,

I saw that you release a new binary version for linux, and it is working fine.

My problem is that you change the settings for the TOF camera. Before i was simulating a TOF camera, and i was able to have good results for the recognition using PCL. Now i have somo more settings(focal lenght and 2 more ....) for the tof camera, and i can´t get the same results.

Is it possible to have the holder binary version for linux (then i create a start up file)? Or maybe the values of those settings to equalize the previus version ...

In windows when i try to write/run a script the blensor crashes ..... In linux i can't have the same results....

Thanks in advance.

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-26 15:46 GMT+01:00 Frederico Cabeço cabeco.frederico@gmail.com:

Sorry, can you be more precise with what i need to do?

Thanks in advance

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-21 9:06 GMT+01:00 Michael Gschwandtner notifications@github.com:

Thank you for the report. I've commited a fix for the crash on startup issue.

The reason is a corrupt startup file in the blensor trunk. It seems to affect all versions of Blensor starting with 1.16rc1. A temporary workaround is to download the official blender (if you are using Blensor 1.16 then it is Blender 2.72 and if you are using the current trunk then it is Blender 2.74), start it and save an empty startup file. The next time you start blensor it will use the new startup file instead of the one that is compiled in.

This issue should now be fixed

Reply to this email directly or view it on GitHub https://github.com/mgschwan/blensor/issues/16#issuecomment-94693926.

Reply to this email directly or view it on GitHub [1].

Links:

[1] https://github.com/mgschwan/blensor/issues/16#issuecomment-107862776

frederico00 commented 9 years ago

Another point,

The referencial (X,Y,Z) form blensor is diferent from the referencial form pcl.... I don't know if it is a blender definition that we can change...

For example z in blensor will be -z in pcl

Regards, FC

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-06-03 17:02 GMT+01:00 Michael Gschwandtner notifications@github.com:

Dear Frederico,

I was afraid that the change to the TOF code would cause some compatibility issues.

Can you send me a blend file from an earlier version where it was still working properly.

The problem with the old TOF code was that there was a bug due to which the field of view could not be changed.

Best regards

Michael

Am 02.06.2015 10:33, schrieb frederico00:

Dear Michael,

I saw that you release a new binary version for linux, and it is working fine.

My problem is that you change the settings for the TOF camera. Before i was simulating a TOF camera, and i was able to have good results for the recognition using PCL. Now i have somo more settings(focal lenght and 2 more ....) for the tof camera, and i can´t get the same results.

Is it possible to have the holder binary version for linux (then i create a start up file)? Or maybe the values of those settings to equalize the previus version ...

In windows when i try to write/run a script the blensor crashes ..... In linux i can't have the same results....

Thanks in advance.

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-26 15:46 GMT+01:00 Frederico Cabeço <cabeco.frederico@gmail.com :

Sorry, can you be more precise with what i need to do?

Thanks in advance

Melhores Cumprimentos,

Frederico Cabeço Licenciado em Eng. Electrótecnica Telm: (+351) 912376259

2015-04-21 9:06 GMT+01:00 Michael Gschwandtner < notifications@github.com>:

Thank you for the report. I've commited a fix for the crash on startup issue.

The reason is a corrupt startup file in the blensor trunk. It seems to affect all versions of Blensor starting with 1.16rc1. A temporary workaround is to download the official blender (if you are using Blensor 1.16 then it is Blender 2.72 and if you are using the current trunk then it is Blender 2.74), start it and save an empty startup file. The next time you start blensor it will use the new startup file instead of the one that is compiled in.

This issue should now be fixed

Reply to this email directly or view it on GitHub https://github.com/mgschwan/blensor/issues/16#issuecomment-94693926.

Reply to this email directly or view it on GitHub [1].

Links:

[1] https://github.com/mgschwan/blensor/issues/16#issuecomment-107862776

— Reply to this email directly or view it on GitHub https://github.com/mgschwan/blensor/issues/16#issuecomment-108499123.