Closed ffnull closed 4 years ago
Project abadoned? no support at all?
Sorry, I am not familiar with babbystepping. I am learning about this iusse.
So? Any solution? http://marlinfw.org/docs/gcode/M290.html
Three methods: 1.Add some codes in Gcode file by modifing the setting "Starting G-Code" of slicer software 2.Add a button on screen by UIEditor to trigger G290-operation by handwork https://github.com/miblooming/JZ-TS24-2/tree/master/JZHelper_ui_editor/JZ-TS35WIFI___(3.5%264.0) https://www.youtube.com/playlist?list=PLamn4I4Ptg5KcN8KiLsWBeAiS-ABRkXjR 3.Add an event operation of by UIEditor
I need add it to main screen of printing process. Button must be near buttons of corrections of temperatures of heaters. on center of button must be shown real height of Z and it must be change while clicking up and down
Here another example how its work https://youtu.be/s5kld8MIo6M
by the way. no sizes and no models for jz-ts40.
The firmware of jz-ts40 is same as jz-ts35
for Example:
by the way. no sizes and no models for jz-ts40. Here:@ffnull https://github.com/miblooming/JZ-TS24-2/blob/master/size_shell/JZ-TS40_4.0shellV1.0-solidworks2016.zip
Hello.Recently buy your display. Best controller ever. Wifi printing is awsome, but i need babbystepping to correct first layer. How i can add it or can you add it?