"No configuration changes were made" when Enable visual effects is enabled

[GoogleCodeExporter]

What steps will reproduce the problem?
1. save any settings
2. then try and apply them
3.

What is the expected output? What do you see instead?
settings to be changed. "No configuration changes were made". and if I
review often it has the setting to be changed twice, once the setting I
want and once the one its stuck on.

What version of the product are you using? On what operating system and web
browser?
openwrt rev: OpenWrt Kamikaze bleeding edge, r11979
image: openwrt-wrt54g-2.4-squashfs.bin
device: on a WRT54G
Xwrt rev: r4428

Please provide any additional info below.

Original issue reported on code.google.com by smelly...@gmail.com on 23 Aug 2008 at 5:41

[GoogleCodeExporter]

please try with a recent snapshot

Original comment by kemen04@gmail.com on 4 Sep 2008 at 5:04

[GoogleCodeExporter]

not managed so far.

Original comment by smelly...@gmail.com on 7 Oct 2008 at 3:36

[GoogleCodeExporter]

What are you trying to change that is not being applied?

Original comment by kemen04@gmail.com on 10 Oct 2008 at 2:09

[GoogleCodeExporter]

ok, reflashed to the most recent kamikaze and x-wrt.

still a problem, but not as much.

its fairly intermittent now, and applies to all settings it seems. some 
examples,
changing mac address of router, changing encryption key of the wireless, 
changing the
IP of the router. just about anything.

says how many settings have been changed. but when you click to apply them it 
doesn't
apply them, although I does seem to store them, so when you reboot it changes 
them.
didn't before I updated.

Original comment by smelly...@gmail.com on 10 Oct 2008 at 6:08

[GoogleCodeExporter]

ok, reflashed to the most recent kamikaze and x-wrt.

still a problem, but not as much.

its fairly intermittent now, and applies to all settings it seems. some 
examples,
changing mac address of router, changing encryption key of the wireless, 
changing the
IP of the router. just about anything.

says how many settings have been changed. but when you click to apply them it 
doesn't
apply them, although I does seem to store them, so when you reboot it changes 
them.
didn't before I updated.

Original comment by smelly...@gmail.com on 10 Oct 2008 at 6:10

[GoogleCodeExporter]

Can you put up the link where you downloaded your image from? I still do not 
see this
here.

Original comment by kemen04@gmail.com on 10 Oct 2008 at 6:27

[GoogleCodeExporter]

WTF? where do you think? the kamikaze branch on the x-wrt server. if you don't 
know
where it is how do you think you can help.

Original comment by smelly...@gmail.com on 10 Oct 2008 at 8:51

[GoogleCodeExporter]

I just needed to make sure of this.

Original comment by kemen04@gmail.com on 10 Oct 2008 at 9:13

[GoogleCodeExporter]

fine.
http://downloads.x-wrt.org/xwrt/kamikaze/snapshots/brcm-2.4/openwrt-wrt54g-squas
hfs.bin

but I am not happy you are taking me for an idiot. There is a fault.

Original comment by smelly...@gmail.com on 11 Oct 2008 at 7:01

[GoogleCodeExporter]

I was not taking you for a idiot. I have dealt with issues in the past that were
nonissue, so I was trying to take the appropriate steps being I do not see this 
issue
here for some reason. Is config.sh running in your processes list?

Original comment by kemen04@gmail.com on 12 Oct 2008 at 5:39

[GoogleCodeExporter]

not sure. checked in status>process in the xwrt browser iface, not, but when I 
click
apply it does seem to be calling it, and the "no config changes made" is a 
response
from that script no?

status>process:

PID USER VSZ STAT COMMAND               
1 root  1912 S  init        
2 root 0 SW [keventd]               
3 root 0 RWN [ksoftirqd_CPU0]               
4 root 0 SW [kswapd]                
5 root 0 SW [bdflush]               
6 root 0 SW [kupdated]              
8 root 0 SW [mtdblockd]                 
55 root 0 SWN [jffs2_gcd_mtd4]              
68 root     1912 S  init        
77 root 1928 S /sbin/syslogd -C16 -S                
79 root 1908 S /sbin/klogd              
104 root 1928 S syslogd -C16                
106 root 1912 S klogd               
257 root 1924 S udhcpc -t 0 -i eth0.1 -r 192.168.1.1 -b -p /var/run/e               
358 root 1924 S udhcpc -t 0 -i wl0 -r 192.168.1.1 -b -p /var/run/wl0.               
683 root 1868 S /usr/sbin/dropbear -p 22                
686 root 1912 S /usr/sbin/httpd -p 80 -h /www -r Biggles                
713 nobody 1212 S /usr/sbin/dnsmasq -K -D -y    -Z -b -E    -s lan  -S /    lan/ -
732 root 1752 S /usr/bin/matrixtunnel -A /etc/ssl/matrixtunnel.cert -               
1650 root 1932 S /usr/sbin/httpd -p 80 -h /www -r Biggles               
1651 root 1060 S /usr/bin/webif-page status-processes.sh                
1652 root   1916 S  sh -c   /usr    /bin/haserl status-processes.sh
1653 root 1080 S /usr/bin/haserl status-processes.sh                
1654 root 1992 S /bin/sh    

Original comment by smelly...@gmail.com on 15 Oct 2008 at 4:45

[GoogleCodeExporter]

do you have Enable visual effects check in the System -> Setting page?

Original comment by kemen04@gmail.com on 11 Nov 2008 at 3:57

[GoogleCodeExporter]

yes.

Original comment by smelly...@gmail.com on 11 Nov 2008 at 5:30

[GoogleCodeExporter]

can you please try disabling it and see if that clears up the issue, I just 
finished
working with someone that was seeing the same issue and disabling that cleared 
it up.

Original comment by kemen04@gmail.com on 11 Nov 2008 at 5:44

[GoogleCodeExporter]

Original comment by kemen04@gmail.com on 11 Nov 2008 at 7:03

• Changed title: "No configuration changes were made" when Enable visual effects is enabled

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I think it fixed it, but have since installed white-russian, so I can't 
completely
verify.

Original comment by smelly...@gmail.com on 26 Jan 2009 at 10:15

[GoogleCodeExporter]

seems occasionally to happen with 8.09.2 r4838 as well.
disabled it and it's fine...

Original comment by ron.bueh...@gmail.com on 30 Jan 2010 at 9:14