search

michaelkubina / SpotMicroESP32

My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of the electronics. The heavy computation will be made by external devices, which in return have the power to command the robot.
GNU General Public License v3.0
319 stars 66 forks source link

Revising nutholes in lower and upper leg #11

Open michaelkubina opened 3 years ago

michaelkubina commented 3 years ago

While assembling lower and upper leg, the nuts have to much play, which leads to misalignments and causes problems during asembly. Changing the size/depth of the pockets or adding thin walls might be a solution

Annihil8ted commented 3 years ago

I too have found some trouble when assembling. I had to jam a small flat head driver to prevent the nut from spinning. Sometimes the nut would also go too deep. Not a big problem but some headaches when assembling

brukhabtu commented 1 year ago

I ended up using threaded inserts instead. The nuts were a bit of a pain