Closed danielezambelli closed 9 months ago
Yes, it isn't supported. I haven't heard about this package before. Do you have a MWE?
I used the "tabto" package in my text, but I don't know if it was a good choice; it seemed simple enough and does what I needed.
An MWE is as follows:
%--8<-------------------------------------
\documentclass[10pt,a4paper]{memoir}
\RequirePackage[italian]{babel}
\RequirePackage[usenames, dvipsnames]{xcolor} % gestione colori
\RequirePackage[colorlinks, hyperindex, pagebackref,
linkcolor=RoyalBlue, filecolor=RoyalBlue,
citecolor = black, urlcolor=RoyalBlue]{hyperref}
\RequirePackage{amsmath, amssymb, amsthm}
\RequirePackage{tikz}
\usetikzlibrary{
arrows,%
arrows.meta,
through,
automata,%
backgrounds,%
calc,%
circuits.ee.IEC,
decorations.markings,%
decorations.shapes,%
decorations.text,%
decorations.pathreplacing,%
fit,%
matrix,%
mindmap,%
patterns,%
positioning,%
intersections,%
shapes,%
shapes.geometric,
}
\RequirePackage[most]{tcolorbox}
\RequirePackage[inline]{enumitem} % elenchi
\RequirePackage{multicol} % testo su più colonne
\RequirePackage{tabto} % testo su più colonne
\usepackage{iftex}
\ifpdftex\typeout{************* PDFTeX*****************}
\RequirePackage[T1]{fontenc}
\RequirePackage[utf8]{inputenc}% non più necessario, ma non disturba
\RequirePackage{stix2} % font
\else
\ifluatex\typeout{************* LuaLaTeX *****************}
\usepackage{fontspec}
\setmainfont{STIX}[Ligatures=TeX]
\usepackage[math-style=ISO]{unicode-math}
\setmathfont{STIX Two Math}
\fi
\fi
\usepackage{lipsum}
\newcommand{\disegno}[2][5]{% Inizializza un disegno
% Sintassi: \disegno[dimensione unità]{comandi grafici}
% Esempi di chiamata:
% \disegno{\draw (0, 0) -- (4, 6);}
% \disegno[3]{\draw (0, 0) -- (4, 6);}
\begin{tikzpicture}[x=#1 mm, y=#1 mm, smooth, line cap=round]
#2
\end{tikzpicture}
}
\NewDocumentCommand \rcomvar{s O{black} m m m m m m}{
% Riferimento Cartesiano Ortogonale Monometrico.
% Se c'è l'asterisco non viene disegnata la griglia.
% Sintassi: \rcomvar[*][parametri]{xi}{xf}{yi}{yf}{varasc}{varord}
% Esempio di chiamata:
%% \disegno{\rcomvar*{-7}{+7}{-11}{+10}{t}{s}
%% \disegno{\rcomvar{-7}{+7}{-11}{+10}{t}{s}
\IfBooleanF{#1}
{\draw[gray!50, very thin, step=1]
(#3-0.3, #5-0.3) grid (#4+0.3, #6+0.3);}
\begin{scope}[-{Stealth[length=2mm, open, round]}, #2] % Assi
\draw (#3-0.3, 0) -- (#4+0.5, 0)
node [below, xshift=-3pt] {$#7$};
\draw (0, #5-0.3) -- (0, #6+0.5)
node [left, yshift=-3pt] {$#8$};
\end{scope}
}
\NewDocumentCommand \rcom{s O{black} m m m m}{
% Riferimento Cartesiano Ortogonale Monometrico.
% Se c'è l'asterisco non viene disegnata la griglia.
% Sintassi: \rcomvar[*][parametri]{xi}{xf}{yi}{yf}
% Esempio di chiamata:
%% \disegno{\rcom*{-7}{+7}{-11}{+10}
%% \disegno{\rcom{-7}{+7}{-11}{+10}
\IfBooleanTF{#1}
{\rcomvar*[#2]{#3}{#4}{#5}{#6}{x}{y}}
{\rcomvar[#2]{#3}{#4}{#5}{#6}{x}{y}}
}
\newenvironment{alternativetext}[1]{}{}
\NewDocumentCommand \immagine{s O{1} m m}{
% Macro for placing image with:
% - Alternative text,
% - scale (default value: 1),
% - centered without an asterisk, with asterisk does NOT center the image.
% Examples:
%% \immagine{}{}
%% \immagine{Alternative text}{\miaimmagine}
%% \immagine[.5]{Alternative text}{\miaimmagine}
%% \immagine*[.5]{Alternative text}{\miaimmagine}
%
\begin{alternativetext}{#3}
\IfBooleanF{#1}
{\begin{center}}
\scalebox{#2}{#4}
\IfBooleanF{#1}
{\end{center}}
\end{alternativetext}
}
\DeclareRobustCommand{\Z}{\mathbb{Z}}
\newcommand{\tonda}[1]{\left( #1 \right)}
\newcommand{\quadra}[1]{\left[ #1 \right]}
\newcommand{\Deriv}[1]{\mathit{D}\quadra{#1}}
\newcommand{\immaginea}{
\disegno{
\rcom{-4}{+4}{-4}{+3}
\filldraw (-3, -3) circle(2pt) node[below right]{$A$};
}
}
\newcommand{\immagineb}{
\disegno{
\rcom{-4}{+4}{-4}{+3}
\filldraw (-2, -2) circle(2pt) node[below right]{$B$};
}
}
\newcommand{\immaginec}{
\disegno{
\rcom{-4}{+4}{-4}{+3}
\filldraw (-1, -1) circle(2pt) node[below right]{$C$};
}
}
\newcommand{\immagined}{
\disegno{
\rcom{-4}{+4}{-4}{+3}
\filldraw (0, 0) circle(2pt) node[below right]{$D$};
}
}
\newcommand{\immaginee}{
\disegno{
\rcom{-4}{+4}{-4}{+3}
\filldraw (+1, +1) circle(2pt) node[below right]{$E$};
}
}
\newcommand{\immaginef}{
\disegno{
\rcom{-4}{+4}{-3}{+4}
\filldraw (-3, +3) circle(2pt) node[below right]{$F$};
}
}
\newcommand{\immagineg}{
\disegno{
\rcom{-4}{+4}{-3}{+4}
\filldraw (-2, +2) circle(2pt) node[below right]{$G$};
}
}
\newcommand{\immagineh}{
\disegno{
\rcom{-4}{+4}{-3}{+4}
\filldraw (-1, +1) circle(2pt) node[below right]{$H$};
}
}
\newcommand{\immaginei}{
\disegno{
\rcom{-4}{+4}{-3}{+4}
\filldraw (0, 0) circle(2pt) node[below right]{$I$};
}
}
\newcommand{\immaginej}{
\disegno{
\rcom{-4}{+4}{-3}{+4}
\filldraw (+1, -1) circle(2pt) node[below right]{$J$};
}
}
\begin{document}
\chapter{Derivata}
\section{Alcune immagini}
\immagine{}{\immaginea}
\immagine{}{\immagineb}
\immagine{}{\immaginec}
\immagine{}{\immagined}
\immagine{}{\immaginee}
\section{Alcune regole di derivazione}
Abbiamo dimostrato le regole di derivazione per alcune funzioni elementari:
\begin{enumerate} [noitemsep]
\item \(\Deriv{k} = 0\) \tab derivata di una costante;
\item \(\Deriv{x} = 1\) \tab derivata della funzione identica;
\item \(\Deriv{\dfrac{1}{x}} = -\dfrac{1}{x^2}\)
\tab derivata della funzione reciproco;
\item \(\Deriv{\sqrt{x}} = \dfrac{1}{2\sqrt{x}}\)
\tab derivata della radice quadrata;
\item \(\Deriv{x^z} = z x^{z-1}\)
\tab derivata della funzione potenza (\(z \in \Z\)).
\end{enumerate}
\immagine{}{\immaginef}
\immagine{}{\immagineg}
\immagine{}{\immagineh}
\immagine{}{\immaginei}
\immagine{}{\immaginej}
\end{document}
%--8<-------------------------------------
At the end of the compilation with:
make4ht tab.tex -f html5-common_domfilters -c ml_make4ht -l -u -s -d ./html/mathjax "mathjax, 3, sec-filename, fn-in, blind"
you get error messages about non-existent .svg files.
But if in the dir where the produced files are moved, there are .svg files, maybe created by the compilation of some previous file, it inserts these files instead of tabs.
Thanks
I'was able to remove image warnings with the following tabto.4ht
file:
\NewConfigure{tabto}{1}
\NewConfigure{tabtos}{1}
\ProvideDocumentCommand\tabto:fourht{sm}{\def\Htabsize{\the\dimexpr#2\relax}\IfBooleanTF {#1}{\a:tabtos}{\a:tabto}}
\HLet\tabto\tabto:fourht
\Configure{tabto}{\HCode{<span class="tabto" style="width:\Htabsize;"></span>}}
\Configure{tabtos}{\HCode{<span class="tabto" style="width:\Htabsize;"></span>}}
\Css{.tabto{display: inline-block;}}
\Hinput{tabto}
\endinput
However, it cannot work as in the PDF output because HTML doesn't support this tabbing feature. So at best, you will get a fixed-length space.
Thank you!!!
tabto.4ht works fine.
How can it be done to leave a larger space?
You can change the min-width
CSS value, like in this configuration file:
\Preamble{xhtml}
\Configure{tabto}{\HCode{<span class="tabto" style="width:\Htabsize;min-width:3em;"></span>}}
\begin{document}
\EndPreamble
Hi
I think the "tabto" package is not yet supported:
When there is a "\tab" command in place of a tab, an image is inserted from among the many .svg present.
Thank you.