Doesn't run properly when installed on USB

[GoogleCodeExporter]

What steps will reproduce the problem?
1.Unzip wiiflow into the apps folder on a FAT32 USB HDD (tested with the 249 
2.0 release)
2.Remove the SD card
3.Launch Wiiflow from the HBC

What is the expected output? What do you see instead?
Wiiflow should work normally.  Instead, I get a code dump.  Running from SD 
works fine.

What version of the product are you using? On what operating system?
249 2.0 release

Please provide any additional information below.
It seems like Wiiflow is hardcoded to look for something on the SD card, 
instead of using the path provided by the loader to run from its own directory. 
 I will be doing some more testing to try to narrow down exactly what that is, 
but for now I at least wanted to open the ticket.

In order to consider this resolved, I would expect that Wiiflow runs normally 
when installed on a USB HDD and loaded from HBC (with or without an SD card 
inserted), loads the config from its own directory on the HDD (instead of from 
the SD card), and is able to load all peripheral files (boxart/codes/etc.) from 
the HDD as well.  Again, I'm not sure exactly what is causing the code dump, 
and will try to update once I learn more, but it is definitely related to 
loading off of the HDD without an SD card inserted.

Awesome work guys :)

Original issue reported on code.google.com by qwertym...@gmail.com on 21 Jun 2010 at 4:27

[GoogleCodeExporter]

Nevermind.  I accidentally copied my wiiflow.ini from my SD card over to the 
HDD, which had settings from my previous configuration for WBFS.  A fresh 
reinstall fixed it.  You can close this ticket as invalid.

Original comment by qwertym...@gmail.com on 21 Jun 2010 at 5:30

[GoogleCodeExporter]

Original comment by thedarkn...@gmail.com on 21 Jun 2010 at 11:18

• Changed state: Invalid