// Set the UART used for communication. e.g. {.fd = 0} leads to UART_0 being used.
static zephyr_transport_params_t default_params = {.fd = 0};
to .fd=1.
I flash the board by st-link, but for connection I use UART-USB concerter
ros2 run micro_ros_agent micro_ros_agent serial --dev /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_c68cb4bd91ecec11be34ac0ead51a8b2-if00-port0
Is there anything to add or what should I change?
I think the problem is in connection between board and my pc, I work on ubnutu 22.04.3, but I don't know why it's starts to running because if there wasn't connection it would show waiting for connection
Issue template
Steps to reproduce the issue
I reproduce steps like on website https://micro.ros.org/docs/tutorials/core/first_application_rtos/zephyr/ I tried pin_pong app and int32_publisher but I used
serial
config But to run it on my board I added my board name in CMakeList.txt and also changed in microro_tranpsort.h fd:to
.fd=1
. I flash the board by st-link, but for connection I use UART-USB concerterActual behavior
Expected bahviour
I want to have a new publisher
ping
in ros2 topics, but for now i only have 2 default. This is what I expect:Additional information
Is there anything to add or what should I change? I think the problem is in connection between board and my pc, I work on ubnutu 22.04.3, but I don't know why it's starts to running because if there wasn't connection it would show
waiting for connection