Closed jodavaho closed 5 months ago
From #6980 , logs are at https://aka.ms/AAczgdt
@jodavaho - I do not have access to that link. Can you attach logs directly?
I have access to those logs.
@jodavaho can you please enable the debug console and share its output ?
Add this to .wslconfig:
[wsl2]
debugConsole=true
Then run wsl --shutdown and restart wsl.
Happy to. Where do I put that file?
@OneBlue Requesting completed instructions.
In %HOMEPATH%
aka C:\Users\you
. Docs here.
OK, I captured a successful startup. I'll post a failed one next time it hangs.
Here's a frozen / hanging startup log:
[ 0.000000] Linux version 5.10.16.3-microsoft-standard-WSL2 (oe-user@oe-host) (x86_64-msft-linux-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Fri Apr 2 22:23:49 UTC 2021
[ 0.000000] Command line: initrd=\initrd.img panic=-1 nr_cpus=16 swiotlb=force console=ttyS0,115200 debug pty.legacy_count=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000001fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000000200000-0x00000000f7ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000803dfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Microsoft Hyper-V
[ 0.000000] Hyper-V: features 0x2e7f, privilege high: 0x3b8030, hints 0x24c2c, misc 0xe0bed7b2
[ 0.000000] Hyper-V Host Build:21390-10.0-2-0.2025
[ 0.000000] Hyper-V: LAPIC Timer Frequency: 0x1e8480
[ 0.000000] tsc: Marking TSC unstable due to running on Hyper-V
[ 0.000000] Hyper-V: Using hypercall for remote TLB flush
[ 0.000000] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[ 0.000002] tsc: Detected 2400.010 MHz processor
[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000016] last_pfn = 0x803e00 max_arch_pfn = 0x400000000
[ 0.000034] MTRR default type: uncachable
[ 0.000035] MTRR fixed ranges enabled:
[ 0.000036] 00000-3FFFF write-back
[ 0.000036] 40000-7FFFF uncachable
[ 0.000037] 80000-8FFFF write-back
[ 0.000038] 90000-FFFFF uncachable
[ 0.000039] MTRR variable ranges enabled:
[ 0.000040] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000041] 1 base 0100000000 mask 7000000000 write-back
[ 0.000041] 2 disabled
[ 0.000042] 3 disabled
[ 0.000042] 4 disabled
[ 0.000043] 5 disabled
[ 0.000043] 6 disabled
[ 0.000044] 7 disabled
[ 0.000053] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000065] last_pfn = 0xf8000 max_arch_pfn = 0x400000000
[ 0.000077] Using GB pages for direct mapping
[ 0.000552] RAMDISK: [mem 0x03035000-0x03043fff]
[ 0.000558] ACPI: Early table checksum verification disabled
[ 0.000570] ACPI: RSDP 0x00000000000E0000 000024 (v02 VRTUAL)
[ 0.000574] ACPI: XSDT 0x0000000000100000 000044 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000580] ACPI: FACP 0x0000000000101000 000114 (v06 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000586] ACPI: DSDT 0x00000000001011B8 01E184 (v02 MSFTVM DSDT01 00000001 MSFT 05000000)
[ 0.000590] ACPI: FACS 0x0000000000101114 000040
[ 0.000593] ACPI: OEM0 0x0000000000101154 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000596] ACPI: SRAT 0x000000000011F33C 0003B0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000600] ACPI: APIC 0x000000000011F6EC 0000C8 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001)
[ 0.000607] ACPI: Local APIC address 0xfee00000
[ 0.000867] Zone ranges:
[ 0.000868] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000869] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000871] Normal [mem 0x0000000100000000-0x0000000803dfffff]
[ 0.000884] Device empty
[ 0.000886] Movable zone start for each node
[ 0.000886] Early memory node ranges
[ 0.000887] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000888] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
[ 0.000890] node 0: [mem 0x0000000100000000-0x0000000803dfffff]
[ 0.001668] Zeroed struct page in unavailable ranges: 17249 pages
[ 0.001670] Initmem setup node 0 [mem 0x0000000000001000-0x0000000803dfffff]
[ 0.001674] On node 0 totalpages: 8371359
[ 0.001675] DMA zone: 59 pages used for memmap
[ 0.001676] DMA zone: 22 pages reserved
[ 0.001678] DMA zone: 3743 pages, LIFO batch:0
[ 0.001708] DMA32 zone: 16320 pages used for memmap
[ 0.001710] DMA32 zone: 1011712 pages, LIFO batch:63
[ 0.013831] Normal zone: 114936 pages used for memmap
[ 0.013835] Normal zone: 7355904 pages, LIFO batch:63
[ 0.014244] ACPI: Local APIC address 0xfee00000
[ 0.014251] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.014506] IOAPIC[0]: apic_id 16, version 17, address 0xfec00000, GSI 0-23
[ 0.014510] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014513] ACPI: IRQ9 used by override.
[ 0.014515] Using ACPI (MADT) for SMP configuration information
[ 0.014522] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.014530] [mem 0xf8000000-0xffffffff] available for PCI devices
[ 0.014532] Booting paravirtualized kernel on Hyper-V
[ 0.014534] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019404] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[ 0.020056] percpu: Embedded 52 pages/cpu s173272 r8192 d31528 u262144
[ 0.020062] pcpu-alloc: s173272 r8192 d31528 u262144 alloc=1*2097152
[ 0.020063] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.020080] Built 1 zonelists, mobility grouping on. Total pages: 8240022
[ 0.020081] Kernel command line: initrd=\initrd.img panic=-1 nr_cpus=16 swiotlb=force console=ttyS0,115200 debug pty.legacy_count=0
[ 0.024498] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.026667] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.026806] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.044979] Memory: 4094124K/33485436K available (16403K kernel code, 2459K rwdata, 3464K rodata, 1444K init, 1164K bss, 675724K reserved, 0K cma-reserved)
[ 0.045022] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.045029] ftrace: allocating 49613 entries in 194 pages
[ 0.061388] ftrace: allocated 194 pages with 3 groups
[ 0.061806] rcu: Hierarchical RCU implementation.
[ 0.061809] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[ 0.061810] Rude variant of Tasks RCU enabled.
[ 0.061811] Tracing variant of Tasks RCU enabled.
[ 0.061812] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.061814] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.066415] Using NULL legacy PIC
[ 0.066418] NR_IRQS: 16640, nr_irqs: 552, preallocated irqs: 0
[ 0.066931] random: crng done (trusting CPU's manufacturer)
[ 0.066960] Console: colour dummy device 80x25
[ 0.332673] printk: console [ttyS0] enabled
[ 0.334293] ACPI: Core revision 20200925
[ 0.335960] Failed to register legacy timer interrupt
[ 0.338056] APIC: Switch to symmetric I/O mode setup
[ 0.340068] Switched APIC routing to physical flat.
[ 0.342467] Hyper-V: Using IPI hypercalls
[ 0.344801] Hyper-V: Using enlightened APIC (xapic mode)
[ 0.344887] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.02 BogoMIPS (lpj=24000100)
[ 0.352013] pid_max: default: 32768 minimum: 301
[ 0.354028] LSM: Security Framework initializing
[ 0.354884] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.354884] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.354884] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.354884] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.354884] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.354884] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.354884] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.354884] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.354884] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.354884] TAA: Mitigation: TSX disabled
[ 0.354884] SRBDS: Mitigation: TSX disabled
[ 0.354884] Freeing SMP alternatives memory: 52K
[ 0.354884] smpboot: CPU0: Intel(R) Core(TM) i9-9980HK CPU @ 2.40GHz (family: 0x6, model: 0x9e, stepping: 0xd)
[ 0.354884] Performance Events: unsupported p6 CPU model 158 no PMU driver, software events only.
[ 0.354921] rcu: Hierarchical SRCU implementation.
[ 0.357793] smp: Bringing up secondary CPUs ...
[ 0.360414] x86: Booting SMP configuration:
[ 0.362544] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.365632] smp: Brought up 1 node, 16 CPUs
[ 0.376578] smpboot: Max logical packages: 1
[ 0.378216] smpboot: Total of 16 processors activated (76800.32 BogoMIPS)
[ 0.407480] node 0 deferred pages initialised in 30ms
[ 0.407480] devtmpfs: initialized
[ 0.407480] x86/mm: Memory block size: 128MB
[ 0.415661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.418606] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.421795] NET: Registered protocol family 16
[ 0.423592] thermal_sys: Registered thermal governor 'step_wise'
[ 0.423616] cpuidle: using governor menu
[ 0.423616] ACPI: bus type PCI registered
[ 0.423616] PCI: Fatal: No config space access function found
[ 0.426010] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.427503] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.434978] raid6: skip pq benchmark and using algorithm avx2x4
[ 0.437241] raid6: using avx2x2 recovery algorithm
[ 0.439091] ACPI: Added _OSI(Module Device)
[ 0.440708] ACPI: Added _OSI(Processor Device)
[ 0.442420] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.444233] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.444889] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.446610] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.448647] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.454577] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.465603] ACPI: Interpreter enabled
[ 0.467012] ACPI: (supports S0 S5)
[ 0.468288] ACPI: Using IOAPIC for interrupt routing
[ 0.470171] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.473707] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 0.475668] iommu: Default domain type: Translated
[ 0.477597] SCSI subsystem initialized
[ 0.479062] hv_vmbus: Vmbus version:5.2
[ 0.479062] PCI: Using ACPI for IRQ routing
[ 0.484922] hv_vmbus: Unknown GUID: c376c1c3-d276-48d2-90a9-c04748072c60
[ 0.479062] PCI: System does not support PCI
[ 0.489088] hv_vmbus: Unknown GUID: 6e382d18-3336-4f4b-acc4-2b7703d4df4a
[ 0.489088] hv_vmbus: Unknown GUID: dde9cbc0-5060-4436-9448-ea1254a5d177
[ 0.490711] clocksource: Switched to clocksource hyperv_clocksource_tsc_page
[ 0.601944] VFS: Disk quotas dquot_6.6.0
[ 0.603522] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.606131] FS-Cache: Loaded
[ 0.607338] pnp: PnP ACPI init
[ 0.608659] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.611215] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.613684] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.616242] pnp: PnP ACPI: found 3 devices
[ 0.622516] NET: Registered protocol family 2
[ 0.624504] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.627915] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.631331] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.634148] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.636860] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.639488] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.642307] NET: Registered protocol family 1
[ 0.644488] RPC: Registered named UNIX socket transport module.
[ 0.646803] RPC: Registered udp transport module.
[ 0.648577] RPC: Registered tcp transport module.
[ 0.650349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.652757] PCI: CLS 0 bytes, default 64
[ 0.654341] Trying to unpack rootfs image as initramfs...
[ 0.656555] Freeing initrd memory: 60K
[ 0.658011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.660475] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB)
[ 0.663565] KVM: vmx: using Hyper-V Enlightened VMCS
[ 0.668754] kvm: already loaded the other module
[ 0.673311] Initialise system trusted keyrings
[ 0.675235] workingset: timestamp_bits=46 max_order=23 bucket_order=0
[ 0.678598] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.681048] NFS: Registering the id_resolver key type
[ 0.683002] Key type id_resolver registered
[ 0.684603] Key type id_legacy registered
[ 0.686199] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.689359] Key type cifs.idmap registered
[ 0.691195] fuse: init (API version 7.32)
[ 0.693029] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 0.697041] 9p: Installing v9fs 9p2000 file system support
[ 0.699181] FS-Cache: Netfs '9p' registered for caching
[ 0.701204] FS-Cache: Netfs 'ceph' registered for caching
[ 0.703286] ceph: loaded (mds proto 32)
[ 0.711691] NET: Registered protocol family 38
[ 0.713503] xor: automatically using best checksumming function avx
[ 0.716233] Key type asymmetric registered
[ 0.717870] Asymmetric key parser 'x509' registered
[ 0.719763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.723684] hv_vmbus: registering driver hv_pci
[ 0.725929] hv_pci fe0ab83c-a509-4bca-a91b-ea83adb286a7: PCI VMBus probing: Using version 0x10003
[ 0.730295] hv_pci fe0ab83c-a509-4bca-a91b-ea83adb286a7: PCI host bridge to bus a509:00
[ 0.733902] pci a509:00:00.0: [1414:008e] type 00 class 0x030200
[ 0.741378] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.744969] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.748815] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.752546] Non-volatile memory driver v1.3
[ 0.759302] brd: module loaded
[ 0.761493] loop: module loaded
[ 0.763044] hv_vmbus: registering driver hv_storvsc
[ 0.765356] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 0.766179] scsi host0: storvsc_host_t
[ 0.768419] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 0.773464] tun: Universal TUN/TAP device driver, 1.6
[ 0.775580] PPP generic driver version 2.4.2
[ 0.777485] PPP BSD Compression module registered
[ 0.779341] PPP Deflate Compression module registered
[ 0.781337] PPP MPPE Compression module registered
[ 0.783166] NET: Registered protocol family 24
[ 0.784866] hv_vmbus: registering driver hv_netvsc
[ 0.786932] VFIO - User Level meta-driver version: 0.3
[ 0.789141] hv_vmbus: registering driver hyperv_keyboard
[ 0.791304] rtc_cmos 00:02: RTC can wake from S4
[ 0.794160] rtc_cmos 00:02: registered as rtc0
[ 0.796156] rtc_cmos 00:02: setting system clock to 2021-06-26T13:40:34 UTC (1624714834)
[ 0.799183] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
[ 0.801814] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 0.805210] device-mapper: raid: Loading target version 1.15.1
[ 0.807518] hv_utils: Registering HyperV Utility Driver
[ 0.809556] hv_vmbus: registering driver hv_utils
[ 0.811379] hv_vmbus: registering driver hv_balloon
[ 0.811382] hv_utils: cannot register PTP clock: 0
[ 0.813278] hv_vmbus: registering driver dxgkrnl
[ 0.813891] hv_balloon: Using Dynamic Memory protocol version 2.0
[ 0.815343] hv_utils: TimeSync IC version 4.0
[ 0.817260] (NULL device *): dxgk: dxg_drv_init Version: 2103
[ 0.819549] Free page reporting enabled
[ 0.823030] (NULL device *): dxgk: mmio allocated 9ffe00000 200000000 9ffe00000 bffdfffff
[ 0.823862] hv_balloon: Cold memory discard hint enabled
[ 0.827208] drop_monitor: Initializing network drop monitor service
[ 0.833134] Mirror/redirect action on
[ 0.834754] IPVS: Registered protocols (TCP, UDP)
[ 0.836645] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 0.839510] IPVS: ipvs loaded.
[ 0.840707] IPVS: [rr] scheduler registered.
[ 0.842356] IPVS: [wrr] scheduler registered.
[ 0.844012] IPVS: [sh] scheduler registered.
[ 0.845711] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 0.849528] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 0.852491] Initializing XFRM netlink socket
[ 0.854189] NET: Registered protocol family 10
[ 0.856432] Segment Routing with IPv6
[ 0.859317] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.861689] NET: Registered protocol family 17
[ 0.863404] Bridge firewalling registered
[ 0.865007] 8021q: 802.1Q VLAN Support v1.8
[ 0.866665] sctp: Hash tables configured (bind 512/512)
[ 0.868791] 9pnet: Installing 9P2000 support
[ 0.870494] Key type dns_resolver registered
[ 0.872155] Key type ceph registered
[ 0.873682] libceph: loaded (mon/osd proto 15/24)
[ 0.875704] NET: Registered protocol family 40
[ 0.877456] hv_vmbus: registering driver hv_sock
[ 0.879286] IPI shorthand broadcast: enabled
[ 0.881114] registered taskstats version 1
[ 0.882719] Loading compiled-in X.509 certificates
[ 0.884800] Btrfs loaded, crc32c=crc32c-generic
[ 0.886942] Unstable clock detected, switching default tracing clock to "global"
[ 0.886942] If you want to keep using the local clock, then add:
[ 0.886942] "trace_clock=local"
[ 0.886942] on the kernel command line
[ 0.895989] Freeing unused kernel image (initmem) memory: 1444K
[ 0.934948] Write protecting the kernel read-only data: 22528k
[ 0.938008] Freeing unused kernel image (text/rodata gap) memory: 2028K
[ 0.940843] Freeing unused kernel image (rodata/data gap) memory: 632K
[ 0.943306] Run /init as init process
[ 0.944683] with arguments:
[ 0.945796] /init
[ 0.946676] with environment:
[ 0.947868] HOME=/
[ 0.948779] TERM=linux
[ 1.596511] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
[ 1.600472] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.601093] sd 0:0:0:0: [sda] 536870912 512-byte logical blocks: (275 GB/256 GiB)
[ 1.603469] scsi 0:0:0:1: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
[ 1.606555] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.610279] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 1.612276] sd 0:0:0:0: [sda] Write Protect is off
[ 1.614900] sd 0:0:0:1: [sdb] 715632 512-byte logical blocks: (366 MB/349 MiB)
[ 1.616558] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[ 1.619568] sd 0:0:0:1: [sdb] Write Protect is on
[ 1.622051] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.624058] sd 0:0:0:1: [sdb] Mode Sense: 0f 00 80 00
[ 1.628790] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.629729] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.636637] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.652312] hv_pci 15930f87-eaed-4b79-8753-551505091433: PCI VMBus probing: Using version 0x10003
[ 1.657126] hv_pci 15930f87-eaed-4b79-8753-551505091433: PCI host bridge to bus eaed:00
[ 1.660009] pci_bus eaed:00: root bus resource [mem 0xc00000000-0xe00001fff window]
[ 1.663662] pci eaed:00:00.0: [1af4:105a] type 00 class 0x088000
[ 1.667859] pci eaed:00:00.0: reg 0x10: [mem 0xe00000000-0xe00000fff 64bit]
[ 1.672074] pci eaed:00:00.0: reg 0x18: [mem 0xe00001000-0xe00001fff 64bit]
[ 1.676384] pci eaed:00:00.0: reg 0x20: [mem 0xc00000000-0xdffffffff 64bit]
[ 1.683042] pci eaed:00:00.0: BAR 4: assigned [mem 0xc00000000-0xdffffffff 64bit]
[ 1.687260] pci eaed:00:00.0: BAR 0: assigned [mem 0xe00000000-0xe00000fff 64bit]
[ 1.691570] pci eaed:00:00.0: BAR 2: assigned [mem 0xe00001000-0xe00001fff 64bit]
[ 1.705456] virtiofs virtio0: Cache len: 0x200000000 @ 0xc00000000
[ 1.769727] memmap_init_zone_device initialised 2097152 pages in 20ms
[ 1.777472] EXT4-fs (sdb): mounted filesystem without journal. Opts: (null)
[ 1.784918] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1.786400] scsi 0:0:0:2: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
[ 1.787385] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[ 1.793790] sd 0:0:0:2: Attached scsi generic sg2 type 0
[ 1.794125] sd 0:0:0:2: [sdc] 536870912 512-byte logical blocks: (275 GB/256 GiB)
[ 1.798821] sd 0:0:0:2: [sdc] 4096-byte physical blocks
[ 1.800868] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.803081] sd 0:0:0:2: [sdc] Mode Sense: 0f 00 00 00
[ 1.805740] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.810470] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.874928] Adding 8388608k swap on /swap/file. Priority:-2 extents:4 across:8413184k
[ 1.882816] EXT4-fs (sdc): recovery complete
[ 1.885224] EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered
[ 1.917247] hv_pci ae3bdc20-b9ca-4291-90d5-c2b0cbbc4e51: PCI VMBus probing: Using version 0x10003
[ 1.972059] hv_pci ae3bdc20-b9ca-4291-90d5-c2b0cbbc4e51: PCI host bridge to bus b9ca:00
[ 1.975368] pci_bus b9ca:00: root bus resource [mem 0xbffe00000-0xbffe02fff window]
[ 1.979056] pci b9ca:00:00.0: [1af4:1049] type 00 class 0x010000
[ 1.982090] pci b9ca:00:00.0: reg 0x10: [mem 0xbffe00000-0xbffe00fff 64bit]
[ 1.985244] pci b9ca:00:00.0: reg 0x18: [mem 0xbffe01000-0xbffe01fff 64bit]
[ 1.988347] pci b9ca:00:00.0: reg 0x20: [mem 0xbffe02000-0xbffe02fff 64bit]
[ 1.993922] pci b9ca:00:00.0: BAR 0: assigned [mem 0xbffe00000-0xbffe00fff 64bit]
[ 1.997168] pci b9ca:00:00.0: BAR 2: assigned [mem 0xbffe01000-0xbffe01fff 64bit]
[ 2.000319] pci b9ca:00:00.0: BAR 4: assigned [mem 0xbffe02000-0xbffe02fff 64bit]
[ 2.294358] hv_pci ff76c621-4dbb-4cca-a959-f47f82d0627f: PCI VMBus probing: Using version 0x10003
[ 2.295487] 9pnet_virtio: no channels available for device drvfs
[ 2.300658] WARNING: mount: waiting for virtio device...
[ 2.349412] hv_pci ff76c621-4dbb-4cca-a959-f47f82d0627f: PCI host bridge to bus 4dbb:00
[ 2.352743] pci_bus 4dbb:00: root bus resource [mem 0xbffe04000-0xbffe06fff window]
[ 2.356436] pci 4dbb:00:00.0: [1af4:1049] type 00 class 0x010000
[ 2.359481] pci 4dbb:00:00.0: reg 0x10: [mem 0xbffe04000-0xbffe04fff 64bit]
[ 2.362579] pci 4dbb:00:00.0: reg 0x18: [mem 0xbffe05000-0xbffe05fff 64bit]
[ 2.365699] pci 4dbb:00:00.0: reg 0x20: [mem 0xbffe06000-0xbffe06fff 64bit]
[ 2.371224] pci 4dbb:00:00.0: BAR 0: assigned [mem 0xbffe04000-0xbffe04fff 64bit]
[ 2.374432] pci 4dbb:00:00.0: BAR 2: assigned [mem 0xbffe05000-0xbffe05fff 64bit]
[ 2.377590] pci 4dbb:00:00.0: BAR 4: assigned [mem 0xbffe06000-0xbffe06fff 64bit]
[ 2.407505] hv_pci e9efebb1-e223-44f3-8962-926dfae8df95: PCI VMBus probing: Using version 0x10003
[ 2.462078] hv_pci e9efebb1-e223-44f3-8962-926dfae8df95: PCI host bridge to bus e223:00
[ 2.465260] pci_bus e223:00: root bus resource [mem 0xbffe08000-0xbffe0afff window]
[ 2.468879] pci e223:00:00.0: [1af4:1049] type 00 class 0x010000
[ 2.471865] pci e223:00:00.0: reg 0x10: [mem 0xbffe08000-0xbffe08fff 64bit]
[ 2.474994] pci e223:00:00.0: reg 0x18: [mem 0xbffe09000-0xbffe09fff 64bit]
[ 2.478138] pci e223:00:00.0: reg 0x20: [mem 0xbffe0a000-0xbffe0afff 64bit]
[ 2.483669] pci e223:00:00.0: BAR 0: assigned [mem 0xbffe08000-0xbffe08fff 64bit]
[ 2.486792] pci e223:00:00.0: BAR 2: assigned [mem 0xbffe09000-0xbffe09fff 64bit]
[ 2.489955] pci e223:00:00.0: BAR 4: assigned [mem 0xbffe0a000-0xbffe0afff 64bit]
[ 2.509202] FS-Cache: Duplicate cookie detected
[ 2.511064] FS-Cache: O-cookie c=00000000e665a4ed [p=00000000ca497d02 fl=222 nc=0 na=1]
[ 2.514264] FS-Cache: O-cookie d=00000000e34441ad n=00000000d8f76ff4
[ 2.516901] FS-Cache: O-key=[10] '34323934393337353133'
[ 2.518946] FS-Cache: N-cookie c=000000003f965cd8 [p=00000000ca497d02 fl=2 nc=0 na=1]
[ 2.521927] FS-Cache: N-cookie d=00000000e34441ad n=00000000a81afc88
[ 2.524366] FS-Cache: N-key=[10] '34323934393337353133'
[ 2.685755] hv_pci ea0c0e95-e1e8-4c48-919c-57898404e91f: PCI VMBus probing: Using version 0x10003
[ 2.687242] 9pnet_virtio: no channels available for device drvfs
[ 2.691622] WARNING: mount: waiting for virtio device...
[ 2.740339] hv_pci ea0c0e95-e1e8-4c48-919c-57898404e91f: PCI host bridge to bus e1e8:00
[ 2.743334] pci_bus e1e8:00: root bus resource [mem 0xbffe0c000-0xbffe0efff window]
[ 2.747100] pci e1e8:00:00.0: [1af4:1049] type 00 class 0x010000
[ 2.750227] pci e1e8:00:00.0: reg 0x10: [mem 0xbffe0c000-0xbffe0cfff 64bit]
[ 2.753393] pci e1e8:00:00.0: reg 0x18: [mem 0xbffe0d000-0xbffe0dfff 64bit]
[ 2.756636] pci e1e8:00:00.0: reg 0x20: [mem 0xbffe0e000-0xbffe0efff 64bit]
[ 2.762360] pci e1e8:00:00.0: BAR 0: assigned [mem 0xbffe0c000-0xbffe0cfff 64bit]
[ 2.765680] pci e1e8:00:00.0: BAR 2: assigned [mem 0xbffe0d000-0xbffe0dfff 64bit]
[ 2.768929] pci e1e8:00:00.0: BAR 4: assigned [mem 0xbffe0e000-0xbffe0efff 64bit]
[ 2.798096] hv_pci a603022f-41ff-47ad-9991-067be9796c5f: PCI VMBus probing: Using version 0x10003
[ 2.852537] hv_pci a603022f-41ff-47ad-9991-067be9796c5f: PCI host bridge to bus 41ff:00
[ 2.855632] pci_bus 41ff:00: root bus resource [mem 0xbffe10000-0xbffe12fff window]
[ 2.859312] pci 41ff:00:00.0: [1af4:1049] type 00 class 0x010000
[ 2.862321] pci 41ff:00:00.0: reg 0x10: [mem 0xbffe10000-0xbffe10fff 64bit]
[ 2.865589] pci 41ff:00:00.0: reg 0x18: [mem 0xbffe11000-0xbffe11fff 64bit]
[ 2.868754] pci 41ff:00:00.0: reg 0x20: [mem 0xbffe12000-0xbffe12fff 64bit]
[ 2.874311] pci 41ff:00:00.0: BAR 0: assigned [mem 0xbffe10000-0xbffe10fff 64bit]
[ 2.877570] pci 41ff:00:00.0: BAR 2: assigned [mem 0xbffe11000-0xbffe11fff 64bit]
[ 2.880789] pci 41ff:00:00.0: BAR 4: assigned [mem 0xbffe12000-0xbffe12fff 64bit]
[ 49.665618] hv_balloon: Max. dynamic memory size: 32702 MB
[ 77.827532] kvm: exiting hardware virtualization
[ 77.830276] sd 0:0:0:2: [sdc] Synchronizing SCSI cache
[ 77.832757] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 77.835479] ACPI: Preparing to enter system sleep state S5
[ 77.837739] reboot: Power down
[ 77.844147] acpi_power_off called
WSL has terminated, press any key to continue...
What "Tasks" remain (above on toolbar?)
What "Tasks" remain (above on toolbar?)
It's because the template has a checkbox for the WSL version. It thinks it's a task list.
Have you tried a full PC restart? Try to restart from the start menu, but hold shift when you press, "Restart." This fixed my problem. I figured it out by trying to run Ubuntu from the wsl --system command. It spat out this error: "The operation timed out because a response was not received from the virtual machine or container.", which led me here. Hopefully it helps!
A restart temporarily solves the problem -- In that I can then access WSL -- but doesn't really "solve" the problem. Hangs return.
I have moved my WSL distro(the vhdx file) to a new drive by exporting it, then importing it(like in this article.) And I have not experienced any more hangs. This is nothing short of a hack and I think that there is probably something weird happening in WSL. Hopefully this "fixes" it.
In my case, whenever the WSL2 terminal hangs when returning from the sleep mode
It fixes the issues but looking for a permanent solution than this kind of patchwork.
I do make it work using the above steps, but recently it hangs and doesn't re-start.
My team is seeing this issue, personally I have seen it on Windows 11. My steps to resolve are:
Services.msc
Powershell
as administratortasklist /svc /fi "imagename eq svchost.exe" | Select-String 'LxssManager'
procexp.exe
running as an administrator, locate the PID and stop the process. I find it easier to lookup the PID using powershell.NOTE 1: Attempting to stop the process in Powershell using Get-Process -Id 3972 | Stop-Process -Force
returns an access denied even as an elevated administrator
NOTE 2: Attempting to stop the process in Services.msc has no effect
NOTE 3: I abandoned using the built-in task manager, not sure if that will also kill the process or not.
I am also having this issue as of recently - My question is do any of you have anything like beyond privilege management (Or a PAM Auth soloution of any kind?) My issues seem to have started after that.
I'm having this issue frequently these days. It seems to have something to do with open file handles, as processes (typescript in particular) start behaving strangely, and just this time, deleting a file in wsl or in windows resulted in the file reappearing in windows moments later--but when trying to delete the reappeared file in wsl, it couldn't find it (despite ls listing it).
Maybe drive issues or something but my ssd reports no issues. I'll try to get some logs next time this happens.
2022-06-05 No definite additional info yet, but I have ~12 zombie node processes that are unkillable and definitely preventing wsl restart.
My issue is less the launch part than shutdown/relaunch, because of things stopping responding. Current windows version/updates--but I'll try to find a more apt issue to tack my comment on.
This might be a duplicate of #8170. Can someone collect log and share repro instruction if this is still happening with the latest Windows updates ?
I am still experiencing this issue.
After sleep, LxssManager gets into a "stopping" state. This breaks WSL and docker. pdowson-rsc's workaround instructions work.
The PAM Privlage magament stuff i has severly broke windows - It ended up getting re-installed by our local IT, and i never found a soloution sorry @remoford
Thank you @remoford.
Unfortunately I'm not seeing anything that jumps out.
Next time this happens, can you please share a dump of the LxssManager process ?
I also have the same problem. When it occurs, I tell the lxssmanager service to stop (which hangs), then find the PID and kill its process tree in task manager.
I don't know if this will help, but the last time I was in this state, before stopping the service and killing the PID, I ran the waitingon.exe
utility on each wsl
process on my laptop. They all reported that they were waiting on PID 14692, which was lxssmanager, and they all had the same message:
Thread ID: 39040 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Does this message give anyone insight into what might be going on?
The full output of waitingon.exe
follows. My apologies for not running from an elevated PowerShell.
PS > (get-process wsl) | ForEach-Object { C:\util\WaitingOn.exe $_.Id }
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 11568 (wsl.exe)
└-Thread ID: 11016 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 15260 (wsl.exe)
└-Thread ID: 39040 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 17276 (wsl.exe)
└-Thread ID: 38484 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 17804 (wsl.exe)
└-Thread ID: 40748 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 18668 (wsl.exe)
└-Thread ID: 38328 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 30632 (wsl.exe)
└-Thread ID: 38188 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 30828 (wsl.exe)
└-Thread ID: 27516 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 31208 (wsl.exe)
└-Thread ID: 34444 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 35472 (wsl.exe)
└-Thread ID: 30916 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 35912 (wsl.exe)
└-Thread ID: 23804 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 37088 (wsl.exe)
└-Thread ID: 36436 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
Written by Leonardo Fagundes. No rights Reserved.
Warning: WaitingOn.exe is not elevated. Only processes for the current user will be analyzed.
Enumerating all blocked threads for the specified process...
Process ID: 39892 (wsl.exe)
└-Thread ID: 39012 is waiting on a Alpc (ObjectName: \RPC Control\OLED0D0EECC34DA561C57A33C21644E) which is currently owned by Process ID: 14692 ()
This issue has been automatically closed since it has not had any activity for the past year. If you're still experiencing this issue please re-file this as a new issue or feature request.
Thank you!
Windows Build Number
Microsoft Windows [Version 10.0.21390.2025]
WSL Version
Kernel Version
Kernel version: 5.10.16
Distro Version
Ubuntu 20.04
Other Software
No response
Repro Steps
Launch wsl application, via the WSL for Linux
Expected Behavior
WSL launches
Actual Behavior
WSL freezes
Diagnostic Logs
https://aka.ms/AAczgdt starting up WSL ubuntu