After uploading the firmware to the board and reset it the i2C stops workign.
I have the feeling the bootloader could be wrong here as the board works fine if I upload the sample firmware.
See logs:
MXChip - Microsoft IoT Developer Kit
[380][OLED: .\az3166-driver\libraries\drivers\display\VGM128064\oled.c: 307] OLED_ERROR: no i2c device found!
You can 1. press Button A and reset to enter configuration mode.
After uploading the firmware to the board and reset it the i2C stops workign.
I have the feeling the bootloader could be wrong here as the board works fine if I upload the sample firmware.
See logs:
MXChip - Microsoft IoT Developer Kit
[380][OLED: .\az3166-driver\libraries\drivers\display\VGM128064\oled.c: 307] OLED_ERROR: no i2c device found! You can 1. press Button A and reset to enter configuration mode.