Open roockiee opened 3 years ago
D4N14L
commented
3 years ago Interesting. Can you provide us the command-line.json file? Seems odd that you are running rush build but it's erroring out about (seemingly) a build:ts script. Also a small repro would help us debug this.
roockiee
commented
3 years ago Sorry, what do you mean by command-line.json file? I can't see this file.
D4N14L
commented
3 years ago The file should exist at common/config/rush/command-line.json.
roockiee
commented
3 years ago Below I have placed the desired file. Sorry I didn't include this in the first comment. I don't know much about it, and I have to finish the project somehow.
/**
* This configuration file defines custom commands for the "rush" command-line.
* More documentation is available on the Rush website: https://rushjs.io
*/
{
"$schema": "https://developer.microsoft.com/json-schemas/rush/v5/command-line.schema.json",
/**
* Custom "commands" introduce new verbs for the command-line. To see the help for these
* example commands, try "rush --help", "rush my-bulk-command --help", or
* "rush my-global-command --help".
*/
"commands": [
{
"name": "lint",
"commandKind": "bulk",
"summary": "Lint all packages",
"safeForSimultaneousRushProcesses": true,
"enableParallelism": true,
"ignoreMissingScript": true,
"allowWarningsInSuccessfulBuild": true
},
{
"name": "lint:fix",
"commandKind": "bulk",
"summary": "Lint all packages",
"safeForSimultaneousRushProcesses": true,
"enableParallelism": true,
"ignoreMissingScript": true,
"allowWarningsInSuccessfulBuild": true
},
{
"name": "prettier",
"commandKind": "global",
"summary": "Used by the pre-commit Git hook. This command invokes Prettier to reformat staged changes.",
"safeForSimultaneousRushProcesses": true,
"autoinstallerName": "rush-prettier",
// This will invoke common/autoinstallers/rush-prettier/node_modules/.bin/pretty-quick
"shellCommand": "pretty-quick --staged"
},
{
"commandKind": "global",
"name": "test:ci:contracts",
"summary": "Tests the smart contracts",
"autoinstallerName": "rush-tools",
"shellCommand": "cd packages/traceability/issuer && rushx test:ci:contracts",
"safeForSimultaneousRushProcesses": false,
"allowWarningsInSuccessfulBuild": true
},
{
"name": "test:e2e",
"commandKind": "global",
"summary": "Run all test:e2e in packages",
"safeForSimultaneousRushProcesses": false,
"autoinstallerName": "rush-tools",
"shellCommand": "lerna run test:e2e --stream --ignore @energyweb/exchange-irec --ignore @energyweb/issuer-api && lerna run test:e2e --stream --scope @energyweb/exchange-irec && lerna run test:e2e --stream --scope @energyweb/issuer-api",
"allowWarningsInSuccessfulBuild": true
},
{
"commandKind": "bulk",
"name": "build:container:canary",
"summary": "Deploys the canary containers",
"safeForSimultaneousRushProcesses": false,
"enableParallelism": false,
"ignoreMissingScript": true,
"allowWarningsInSuccessfulBuild": true
},
{
"commandKind": "bulk",
"name": "build:container:latest",
"summary": "Deploys the stable containers",
"safeForSimultaneousRushProcesses": false,
"enableParallelism": false,
"ignoreMissingScript": true,
"allowWarningsInSuccessfulBuild": true
},
{
"commandKind": "bulk",
"name": "clean",
"summary": "Cleans the repo",
"safeForSimultaneousRushProcesses": false,
"enableParallelism": false,
"ignoreMissingScript": true,
"allowWarningsInSuccessfulBuild": true
},
{
"name": "run:origin",
"commandKind": "global",
"summary": "Runs the full Origin development suite with a local blockchain",
"safeForSimultaneousRushProcesses": false,
"autoinstallerName": "rush-tools",
"shellCommand": "concurrently --restart-tries 3 --restart-after 1500 -n ganache,backend,ui \"yarn run:ganache\" \"wait-on tcp:8545 && yarn migrate:demo && yarn run:backend\" \"wait-on tcp:3030 && yarn run:ui\"",
"allowWarningsInSuccessfulBuild": true
},
{
"name": "run:origin:web3",
"commandKind": "global",
"summary": "Runs the full Origin development suite on the Volta testnet",
"safeForSimultaneousRushProcesses": false,
"autoinstallerName": "rush-tools",
"shellCommand": "concurrently --restart-tries 3 --restart-after 1500 -n backend,ui \"yarn migrate:demo:web3 && yarn run:backend\" \"wait-on tcp:3030 && yarn run:ui\" \"wait-on tcp:3030 && yarn run:ui-core\" \"wait-on tcp:3030 && yarn run:exchange-ui\"",
"allowWarningsInSuccessfulBuild": true
},
{
"commandKind": "global",
"name": "storybook",
"summary": "Launch storybook UI in origin-ui-core package",
"shellCommand": "cd packages/ui && rushx storybook",
"safeForSimultaneousRushProcesses": true
},
{
"commandKind": "global",
"name": "build:ui-packages",
"summary": "Build all UI packages without root origin-ui app",
"shellCommand": "cd packages/ui && rushx build:all-packages",
"safeForSimultaneousRushProcesses": false
}
// {
// /**
// * (Required) Determines the type of custom command.
// * Rush's "bulk" commands are invoked separately for each project. Rush will look in
// * each project's package.json file for a "scripts" entry whose name matches the
// * command name. By default, the command will run for every project in the repo,
// * according to the dependency graph (similar to how "rush build" works).
// * The set of projects can be restricted e.g. using the "--to" or "--from" parameters.
// */
// "commandKind": "bulk",
//
// /**
// * (Required) The name that will be typed as part of the command line. This is also the name
// * of the "scripts" hook in the project's package.json file.
// * The name should be comprised of lower case words separated by hyphens or colons. The name should include an
// * English verb (e.g. "deploy"). Use a hyphen to separate words (e.g. "upload-docs"). A group of related commands
// * can be prefixed with a colon (e.g. "docs:generate", "docs:deploy", "docs:serve", etc).
// *
// * Note that if the "rebuild" command is overridden here, it becomes separated from the "build" command
// * and will call the "rebuild" script instead of the "build" script.
// */
// "name": "my-bulk-command",
//
// /**
// * (Required) A short summary of the custom command to be shown when printing command line
// * help, e.g. "rush --help".
// */
// "summary": "Example bulk custom command",
//
// /**
// * A detailed description of the command to be shown when printing command line
// * help (e.g. "rush --help my-command").
// * If omitted, the "summary" text will be shown instead.
// *
// * Whenever you introduce commands/parameters, taking a little time to write meaningful
// * documentation can make a big difference for the developer experience in your repo.
// */
// "description": "This is an example custom command that runs separately for each project",
//
// /**
// * By default, Rush operations acquire a lock file which prevents multiple commands from executing simultaneously
// * in the same repo folder. (For example, it would be a mistake to run "rush install" and "rush build" at the
// * same time.) If your command makes sense to run concurrently with other operations,
// * set "safeForSimultaneousRushProcesses" to true to disable this protection.
// *
// * In particular, this is needed for custom scripts that invoke other Rush commands.
// */
// "safeForSimultaneousRushProcesses": false,
//
// /**
// * (Required) If true, then this command is safe to be run in parallel, i.e. executed
// * simultaneously for multiple projects. Similar to "rush build", regardless of parallelism
// * projects will not start processing until their dependencies have completed processing.
// */
// "enableParallelism": false,
//
// /**
// * Normally projects will be processed according to their dependency order: a given project will not start
// * processing the command until all of its dependencies have completed. This restriction doesn't apply for
// * certain operations, for example a "clean" task that deletes output files. In this case
// * you can set "ignoreDependencyOrder" to true to increase parallelism.
// */
// "ignoreDependencyOrder": false,
//
// /**
// * Normally Rush requires that each project's package.json has a "scripts" entry matching
// * the custom command name. To disable this check, set "ignoreMissingScript" to true;
// * projects with a missing definition will be skipped.
// */
// "ignoreMissingScript": false,
//
// /**
// * When invoking shell scripts, Rush uses a heuristic to distinguish errors from warnings:
// * - If the shell script returns a nonzero process exit code, Rush interprets this as "one or more errors".
// * Error output is displayed in red, and it prevents Rush from attempting to process any downstream projects.
// * - If the shell script returns a zero process exit code but writes something to its stderr stream,
// * Rush interprets this as "one or more warnings". Warning output is printed in yellow, but does NOT prevent
// * Rush from processing downstream projects.
// *
// * Thus, warnings do not interfere with local development, but they will cause a CI job to fail, because
// * the Rush process itself returns a nonzero exit code if there are any warnings or errors. This is by design.
// * In an active monorepo, we've found that if you allow any warnings in your master branch, it inadvertently
// * teaches developers to ignore warnings, which quickly leads to a situation where so many "expected" warnings
// * have accumulated that warnings no longer serve any useful purpose.
// *
// * Sometimes a poorly behaved task will write output to stderr even though its operation was successful.
// * In that case, it's strongly recommended to fix the task. However, as a workaround you can set
// * allowWarningsInSuccessfulBuild=true, which causes Rush to return a nonzero exit code for errors only.
// *
// * Note: The default value is false. In Rush 5.7.x and earlier, the default value was true.
// */
// "allowWarningsInSuccessfulBuild": false,
//
// /**
// * If true then this command will be incremental like the built-in "build" command
// */
// "incremental": false,
//
// /**
// * (EXPERIMENTAL) Normally Rush terminates after the command finishes. If this option is set to "true" Rush
// * will instead enter a loop where it watches the file system for changes to the selected projects. Whenever a
// * change is detected, the command will be invoked again for the changed project and any selected projects that
// * directly or indirectly depend on it.
// *
// * For details, refer to the website article "Using watch mode".
// */
// "watchForChanges": false,
//
// /**
// * (EXPERIMENTAL) Disable cache for this action. This may be useful if this command affects state outside of
// * projects' own folders.
// */
// "disableBuildCache ": false
// },
//
// {
// /**
// * (Required) Determines the type of custom command.
// * Rush's "global" commands are invoked once for the entire repo.
// */
// "commandKind": "global",
//
// "name": "my-global-command",
// "summary": "Example global custom command",
// "description": "This is an example custom command that runs once for the entire repo",
//
// "safeForSimultaneousRushProcesses": false,
//
// /**
// * (Required) A script that will be invoked using the OS shell. The working directory will be
// * the folder that contains rush.json. If custom parameters are associated with this command, their
// * values will be appended to the end of this string.
// */
// "shellCommand": "node common/scripts/my-global-command.js",
//
// /**
// * If your "shellCommand" script depends on NPM packages, the recommended best practice is
// * to make it into a regular Rush project that builds using your normal toolchain. In cases where
// * the command needs to work without first having to run "rush build", the recommended practice
// * is to publish the project to an NPM registry and use common/scripts/install-run.js to launch it.
// *
// * Autoinstallers offer another possibility: They are folders under "common/autoinstallers" with
// * a package.json file and shrinkwrap file. Rush will automatically invoke the package manager to
// * install these dependencies before an associated command is invoked. Autoinstallers have the
// * advantage that they work even in a branch where "rush install" is broken, which makes them a
// * good solution for Git hook scripts. But they have the disadvantages of not being buildable
// * projects, and of increasing the overall installation footprint for your monorepo.
// *
// * The "autoinstallerName" setting must not contain a path and must be a valid NPM package name.
// * For example, the name "my-task" would map to "common/autoinstallers/my-task/package.json", and
// * the "common/autoinstallers/my-task/node_modules/.bin" folder would be added to the shell PATH when
// * invoking the "shellCommand".
// */
// // "autoinstallerName": "my-task"
// }
],
/**
* Custom "parameters" introduce new parameters for specified Rush command-line commands.
* For example, you might define a "--production" parameter for the "rush build" command.
*/
"parameters": [
// {
// /**
// * (Required) Determines the type of custom parameter.
// * A "flag" is a custom command-line parameter whose presence acts as an on/off switch.
// */
// "parameterKind": "flag",
//
// /**
// * (Required) The long name of the parameter. It must be lower-case and use dash delimiters.
// */
// "longName": "--my-flag",
//
// /**
// * An optional alternative short name for the parameter. It must be a dash followed by a single
// * lower-case or upper-case letter, which is case-sensitive.
// *
// * NOTE: The Rush developers recommend that automation scripts should always use the long name
// * to improve readability. The short name is only intended as a convenience for humans.
// * The alphabet letters run out quickly, and are difficult to memorize, so *only* use
// * a short name if you expect the parameter to be needed very often in everyday operations.
// */
// "shortName": "-m",
//
// /**
// * (Required) A long description to be shown in the command-line help.
// *
// * Whenever you introduce commands/parameters, taking a little time to write meaningful
// * documentation can make a big difference for the developer experience in your repo.
// */
// "description": "A custom flag parameter that is passed to the scripts that are invoked when building projects",
//
// /**
// * (Required) A list of custom commands and/or built-in Rush commands that this parameter may
// * be used with. The parameter will be appended to the shell command that Rush invokes.
// */
// "associatedCommands": ["build", "rebuild"]
// },
//
// {
// /**
// * (Required) Determines the type of custom parameter.
// * A "string" is a custom command-line parameter whose value is a simple text string.
// */
// "parameterKind": "string",
// "longName": "--my-string",
// "description": "A custom string parameter for the \"my-global-command\" custom command",
//
// "associatedCommands": ["my-global-command"],
//
// /**
// * The name of the argument, which will be shown in the command-line help.
// *
// * For example, if the parameter name is '--count" and the argument name is "NUMBER",
// * then the command-line help would display "--count NUMBER". The argument name must
// * be comprised of upper-case letters, numbers, and underscores. It should be kept short.
// */
// "argumentName": "SOME_TEXT",
//
// /**
// * If true, this parameter must be included with the command. The default is false.
// */
// "required": false
// },
//
// {
// /**
// * (Required) Determines the type of custom parameter.
// * A "choice" is a custom command-line parameter whose argument must be chosen from a list of
// * allowable alternatives.
// */
// "parameterKind": "choice",
// "longName": "--my-choice",
// "description": "A custom choice parameter for the \"my-global-command\" custom command",
//
// "associatedCommands": ["my-global-command"],
//
// /**
// * If true, this parameter must be included with the command. The default is false.
// */
// "required": false,
//
// /**
// * Normally if a parameter is omitted from the command line, it will not be passed
// * to the shell command. this value will be inserted by default. Whereas if a "defaultValue"
// * is defined, the parameter will always be passed to the shell command, and will use the
// * default value if unspecified. The value must be one of the defined alternatives.
// */
// "defaultValue": "vanilla",
//
// /**
// * (Required) A list of alternative argument values that can be chosen for this parameter.
// */
// "alternatives": [
// {
// /**
// * A token that is one of the alternatives that can be used with the choice parameter,
// * e.g. "vanilla" in "--flavor vanilla".
// */
// "name": "vanilla",
//
// /**
// * A detailed description for the alternative that can be shown in the command-line help.
// *
// * Whenever you introduce commands/parameters, taking a little time to write meaningful
// * documentation can make a big difference for the developer experience in your repo.
// */
// "description": "Use the vanilla flavor (the default)"
// },
//
// {
// "name": "chocolate",
// "description": "Use the chocolate flavor"
// },
//
// {
// "name": "strawberry",
// "description": "Use the strawberry flavor"
// }
// ]
// }
]
}
@roockiee there's nothing in your command-line.json that implies that mentions this command. This is hard to diagnose without a repro. Could you provide a small repro for us to investigate?
I am getting the following error during
rush build. I get this error in the virtual machine while locally everything is work.The problem arose after changing
yarntorushin the project.Info: Ubuntu 20.04 lts Node version: 14.17.5 Npm version: 7.42.0
/root/.nvm/versions/node/v14.15.0/lib ├── @microsoft/rush@5.53.0 ├── node-gyp@8.2.0 ├── node-pre-gyp@0.17.0 ├── npm@7.24.0 └── yarn@1.22.11
jenkins CI/CD pipeline script (test):
Traceback: