version 5.9.3 issue

[GoogleCodeExporter]

What steps will reproduce the problem?
1. working config adalight hardware. 50 lights with prismatik 5.9.1
2. download and install prismatik 5.9.3
3. (restarted pc to be sure)

What is the expected output? What do you see instead?
Expected was to refunction as it did before. 
Instead: lights didn't respond on desktop. no wallpaper lighting or 
popups/windows..
I started a movie and the lights worked again. But when the should change from 
color; They change thru the whole colorspectrum instead from 1 color to the 
other.

What version of the product are you using? On what operating system?
version 5.9.3 on Windows 8 64bit and on Windows 7 64bit. On my Win7 machine I 
got a 25 lights setup and got the exact same problems

Please provide any additional information below.
-

Original issue reported on code.google.com by vdoor...@gmail.com on 27 Mar 2013 at 5:06

Attachments:

• Prismatik.2.log

[GoogleCodeExporter]

did you try to set luminosity threshold to zero as described there: 
http://wiki.pixelkit.ru/en/Prismatik_FAQ

Original comment by tim.hell...@gmail.com on 27 Mar 2013 at 11:54

• Changed state: NeedMoreInfo
• Added labels: AffectedVersion-5.9.3

[GoogleCodeExporter]

Hello,

No i did not yet try that one, now i wanted to try it, but i cant connect
to the device anymore.
While installing old version it immediate connects again..

But old version works very well :)

Grts Ronnie

Original comment by vdoor...@gmail.com on 2 Apr 2013 at 4:40

[GoogleCodeExporter]

I reinstalled the 'old' Prismatik 5.9.3 but it kept the settings from the
5.9.4 (luminousity settings)  and now 5.9.3 Prismatik flips aswell  (on 0
and any other setting)
So i think it has something to do with it

Gr. Ronnie

2013/4/2 Ronnie van Doorn <vdoorn.r@gmail.com>

Original comment by vdoor...@gmail.com on 2 Apr 2013 at 4:48

[GoogleCodeExporter]

i need logs again)

Original comment by tim.hell...@gmail.com on 2 Apr 2013 at 5:58

[GoogleCodeExporter]

All the logs i have..

(also some 5.9.4 logs i guess)

Original comment by vdoor...@gmail.com on 2 Apr 2013 at 6:02

Attachments:

• Prismatik.0.log
• Prismatik.1.log
• Prismatik.2.log
• Prismatik.3.log
• Prismatik.4.log

[GoogleCodeExporter]

Hello,
I have the same problems with Prismatik 5.9.3 and 5.9.4:

What version of the product are you using? On what operating system?
Prismatik 5.9.4 on MacOSX 10.8.3

Please provide any additional information below.
Lightpack 5.8.6 works quite well with my Adalight setup.

Prismatik 5.9.3 can connect to the device but produces strange 'rainbow' color 
effects as already mentioned by Ronnie. I have experimented a lot with the 
available parameters, but none of the settings solves the problem.

Prismatik 5.9.4 is not able to connect to the device at all. The log file 
contains reoccurring entries of 'void 
SettingsWindow::ledDeviceCallSuccess(bool) Backlight::StatusDeviceError'.

Cheers,
Philip

Original comment by sync4ph...@googlemail.com on 2 Apr 2013 at 6:29

Attachments:

• Prismatik.0.log

[GoogleCodeExporter]

All the same as before, except I now get :
20:51:08:283 Warning: virtual void LedDeviceAdalight::open() Serial device 
"COM3" open fail 

Original comment by guy.leon...@gmail.com on 2 Apr 2013 at 8:00

Attachments:

• Prismatik.0.log
• Prismatik.1.log

[GoogleCodeExporter]

Original comment by tim.hell...@gmail.com on 2 Apr 2013 at 8:23

• Changed state: Accepted
• Added labels: AffectedVersion-5.9.4, Priority-Critical, TargetVersion-5.9.5
• Removed labels: AffectedVersion-5.9.3, Priority-Medium

[GoogleCodeExporter]

Original comment by tim.hell...@gmail.com on 3 Apr 2013 at 9:45

• Changed state: Started

[GoogleCodeExporter]

This issue was closed by revision eb079227ab43.

Original comment by tim.hell...@gmail.com on 3 Apr 2013 at 11:23

• Changed state: Fixed

[GoogleCodeExporter]

I do not have Adalight device for now, so it could be still buggy, please check 
it out: 
https://drive.google.com/folderview?id=0B1c_cMsvPufaTHZmT2prVVVkb0U&usp=sharing

Original comment by tim.hell...@gmail.com on 3 Apr 2013 at 1:54

[GoogleCodeExporter]

Unfortunately, your fix is not working for me.

Original comment by sync4ph...@googlemail.com on 3 Apr 2013 at 4:34

Attachments:

• Prismatik.0.log

[GoogleCodeExporter]

This issue was closed by revision 7eec4bd9ab15.

Original comment by tim.hell...@gmail.com on 5 Apr 2013 at 4:03

[GoogleCodeExporter]

guys, 5.9.5 is released, did you try it?

Original comment by tim.hell...@gmail.com on 6 Apr 2013 at 7:54

[GoogleCodeExporter]

Thanks for the notice, it slipped my mind.

I downloaded it a half hour ago and after a reboot my Adalight setup and my 
Prismatik where friends again.

But until I tried the lights, its another rainbow fest:
https://www.youtube.com/watch?v=iDGhU_W9k4A 
Luminosity settings: 0 Dead zone

Original comment by vdoor...@gmail.com on 6 Apr 2013 at 10:54

Attachments:

• Prismatik.0.log
• Prismatik.1.log
• Prismatik.2.log

[GoogleCodeExporter]

Yes, I tried 5.9.5. The connection problem is fixed. Thanks a lot!
But, I still have the strange 'rainbow'/flashing colors effect. Even when I set 
the mode to mood lamp with automatic color change, the color transitions are 
completely crazy (LEDs are flickering and flashing in wrong colors). With 
Lightpack 5.8.6 color transitions are absolutely smooth.
Attached you find a log file recorded at the maximal debug level.

Original comment by sync4ph...@googlemail.com on 6 Apr 2013 at 10:55

[GoogleCodeExporter]

Hmm, my attachment storage quota exceeded :-(.

I am trying to describe exactly the same effect shown by Ronnie's youtube clip.

Original comment by sync4ph...@googlemail.com on 6 Apr 2013 at 11:00

[GoogleCodeExporter]

i think i got it, please try this (windows version only for now): 
https://drive.google.com/folderview?id=0B1c_cMsvPufaTHZmT2prVVVkb0U&usp=sharing

Original comment by tim.hell...@gmail.com on 7 Apr 2013 at 8:06

[GoogleCodeExporter]

That has solved all my problems! Many thanks :)

Original comment by guy.leon...@gmail.com on 7 Apr 2013 at 8:26

[GoogleCodeExporter]

This has solved it for me aswell.

Thank you

Original comment by vdoor...@gmail.com on 7 Apr 2013 at 8:31

[GoogleCodeExporter]

This has even fixed it for me in XBMC - for several versions there just has 
been no lightpack response with XBMC. Now? Flawless.

Original comment by guy.leon...@gmail.com on 7 Apr 2013 at 11:42

[GoogleCodeExporter]

I spoke too soon, it briefly works. Colours etc are all fine. But then it 
flashes at a very very fast rate on, off, on, off etc. Changing the dead zone 
settings changes the rate of flashing from fast to very fast to extremely fast!.

Nearly there! :) 

Original comment by guy.leon...@gmail.com on 7 Apr 2013 at 11:47

Attachments:

• Prismatik.0.log

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

guy.leonard:
i've created an issue: https://code.google.com/p/lightpack/issues/detail?id=318 
please post further details there.
it would be good to see demo, cause i have no idea what is wrong and some demo 
could help me.

vdoorn.r:
Thanks for your demo, which was really helpful. Could you please limit access 
to the video? We just want to avoid misrepresentation: the video doesn't 
contain details or history so some could misunderstood it, at the same time 
every issue and source code change are available for everyone.

Thanks again for your effort, guys.

Original comment by tim.hell...@gmail.com on 8 Apr 2013 at 12:50

[GoogleCodeExporter]

Hey guys,

Thanks for the notice to make the bug movie private...
Thank you guys for fixing the errors :)

greetings

Original comment by vdoor...@gmail.com on 8 Apr 2013 at 7:52