Sometimes HDD not detected at startup of Wiiflow

[GoogleCodeExporter]

Wii 4.2 - pimp my wii 2.11 full OK - WiiFlow 2.2:

Sometimes (1/5), at the startup of wiiflow, my HDD is not detected (please plug 
in your HDD in USB port 0...etc.). With older versions (3 or 4 passed release) 
of Wiiflow I never faced this problem.

I have tested with several wii and several HDD.

Thank you

Original issue reported on code.google.com by a.stylia...@gmail.com on 15 Nov 2010 at 9:48

[GoogleCodeExporter]

I also face this quite often (3/5) with a Seagate FreeAgent hard drive. It 
requires two USB slots at once. One of the USB plug sprouts another one, so I 
call it the "root" plug. When I plug the root plug into USB port 0 and the 
sprout plug into port 1, it usually works. However, sometimes, when loading 
Wiiflow with this exact configuration, it will tell me the HDD is not detected. 
To fix this, I have to pull them out and put them back in, but that doesn't 
work about half the time. (Meaning that I have to try again and again until it 
does work.)

Original comment by Wolvenre...@gmail.com on 22 Nov 2010 at 11:47

[GoogleCodeExporter]

this should be fixed for the RC. r301

Original comment by Miigotu on 30 Nov 2010 at 9:15

• Changed state: Fixed