search

mikaelnousiainen / RS41ng

Custom firmware for Vaisala RS41 and Graw DFM-17 radiosondes with support for amateur radio use. Ideal for tracking high-altitude balloons. Supported modes include APRS, Horus 4FSK mode, CATS, morse code (CW) and additional digital modes like WSPR and FT8 via Si5351.
GNU General Public License v2.0
109 stars 28 forks source link

Power OFF Function Not Working for both RS41 and DFM17 #84

Open Joe-WJ2B opened 4 months ago

Joe-WJ2B commented 4 months ago

When the #define ALLOW_POWER_OFF field in the config.h file is set to "true", the power OFF function is not working in both the RS41 and DFM17. I have held down the Power Button while the sonde is not transmitting but the sonde does not turn off. Only way to power OFF is to remove the batteries. Thanks, Joe WJ2B

K4KDR commented 4 months ago

Have noticed the same thing & thought perhaps that the button had to be pressed at some exact point and/or for some exact duration. However, have not yet found the right combination so I also have had to just remove the batteries. --Scott, K4KDR

videobuff commented 2 months ago

Same expierence here (27 april) Green led is flashing though, but red is off. Then green stopped flashing but still cannot switch off.