search

mildsunrise / dm500-satip

📡 Kernel & firmware image to turn a DM500 into a SAT>IP server
37 stars 11 forks source link

Error: No tuner is available. Please file an issue on dm500-satip. #10

Open pczolee opened 5 years ago

pczolee commented 5 years ago

Dear Xavi.

I had an dm500 which has been working without any problem for years. Now after an current problem (in the house) it is rebooted, and now it is not working :(. I tried with a new image an a backup as well, but no success :(.

Here is the dmesg:

--- STBx25xx Digital Video Broadcasting drivers --- GPIO-253 autorequested Using interrupts: 17 18 19 23 --- STBx25xx MPEG-2 Transport Demultiplexer driver --- dvb-stbx25xx: resetting demux... done (took 1 ms) dvb-stbx25xx: Mapped 2097152 bytes of demux memory at 0xc3900000 DVB: registering new adapter (STBx25xx Digital TV device) GPIO-238 autorequested ibm-iic0: xfer error, EXTSTS = 0x43 ibm-iic0: xfer error, EXTSTS = 0x73 ibm-iic0: bus is stuck, resetting ibm-iic0: soft reset ibm-iic0: init stbx25xx-dvb dvb.2: could not attach frontend dvb-stbx25xx: Front-end initialization failed: error -19 dvb-stbx25xx: IBM STBx25xx digital TV hardware driver loaded successfully

What happened? It is died?

Thanks

mildsunrise commented 5 years ago

Seems like a problem with the board, can you flash the original firmware and see if it works?

pczolee commented 5 years ago

Thanks for the reply. I tried OpenPLI, and the problem looks same (but just one line -which is maybe relevant- in the dmesg: "stv: wake up failed"). The tuner is not recognised (it is unknown in the info screen). What could be cause this?

mildsunrise commented 5 years ago

If it looks like hardware damage I have no clue, sorry...