Bad luck with firmware versions

laurivaltteri commented 5 years ago

Operating System: macOS High Sierra
Python Version: 3.6.3 :: Anaconda custom (64-bit)
Sonoff model: RF
Sonoff firmware version: apparently was 1.6 and now the newest 2.?

I have read the README, and understand that SonOTA does not work with the latest Sonoff firmware: yes Please also drag and drop the generated debug_########.log file onto the issue so it is attached.

2018-10-18 11:43:37,948: DEBUG: Current IPs: ['192.168.1.230']
2018-10-18 11:43:37,959: INFO: Using the following configuration:
2018-10-18 11:43:37,959: INFO:  Server IP Address: 192.168.1.230
2018-10-18 11:43:37,960: INFO:  WiFi SSID: DNA-WLAN-A73DF4
2018-10-18 11:43:37,960: INFO:  WiFi Password: ***********
2018-10-18 11:43:37,960: INFO: Platform: darwin
2018-10-18 11:43:37,970: INFO: ** Now connect via WiFi to your Sonoff device.
2018-10-18 11:43:37,970: INFO: ** Please change into the ITEAD WiFi network (ITEAD-100001XXXX). The default password is 12345678.
2018-10-18 11:43:37,971: INFO: To reset the Sonoff to defaults, press the button for 7 seconds and the light will start flashing rapidly.
2018-10-18 11:43:37,971: INFO: ** This application should be kept running and will wait until connected to the Sonoff...
2018-10-18 11:43:50,020: DEBUG: Current IPs: ['10.10.7.2']
2018-10-18 11:43:50,023: DEBUG: ~~ Connection attempt
2018-10-18 11:43:50,023: DEBUG: >> HTTP GET /10.10.7.1/device
2018-10-18 11:43:50,039: DEBUG: << {
2018-10-18 11:43:50,039: DEBUG:     "deviceid": "10003218fd",
2018-10-18 11:43:50,040: DEBUG:     "apikey": "43a19103-10e3-4aa1-8497-1fefbd2a41f3",
2018-10-18 11:43:50,040: DEBUG:     "accept": "post"
2018-10-18 11:43:50,040: DEBUG: }
2018-10-18 11:43:50,040: DEBUG: >> HTTP POST /10.10.7.1/ap
2018-10-18 11:43:50,040: DEBUG: >> {
2018-10-18 11:43:50,040: DEBUG:     "version": 4,
2018-10-18 11:43:50,040: DEBUG:     "ssid": "DNA-WLAN-A73DF4",
2018-10-18 11:43:50,040: DEBUG:     "password": "***********",
2018-10-18 11:43:50,041: DEBUG:     "serverName": "192.168.1.230",
2018-10-18 11:43:50,041: DEBUG:     "port": 8443
2018-10-18 11:43:50,041: DEBUG: }
2018-10-18 11:43:50,257: DEBUG: << {
2018-10-18 11:43:50,257: DEBUG:     "error": 0
2018-10-18 11:43:50,257: DEBUG: }
2018-10-18 11:43:50,257: INFO: ~~ Provisioning completed
2018-10-18 11:43:50,257: INFO: Starting stage2...
2018-10-18 11:43:50,261: INFO: ** The IP address of <serve_host> (192.168.1.230) is not assigned to any interface on this machine.
2018-10-18 11:43:50,261: INFO: ** Please change WiFi network to DNA-WLAN-A73DF4 and make sure 192.168.1.230 is being assigned to your WiFi interface.
2018-10-18 11:43:50,261: INFO: ** This application should be kept running and will wait until connected to the WiFi...
2018-10-18 11:44:00,285: DEBUG: Current IPs: []
2018-10-18 11:44:06,298: DEBUG: Current IPs: ['192.168.1.230']
2018-10-18 11:44:06,299: INFO: ~~ Starting web server (HTTP port: 8080, HTTPS port 8443)
2018-10-18 11:44:06,300: DEBUG: Using selector: KqueueSelector
2018-10-18 11:44:06,302: INFO: ~~ Waiting for device to connect
2018-10-18 11:44:06,305: INFO: *** IMPORTANT! ***
2018-10-18 11:44:06,306: INFO: ** AFTER the first download is COMPLETE, with in a minute or so you should connect to the new SSID "FinalStage" to finish the process.
2018-10-18 11:44:06,306: INFO: ** ONLY disconnect when the new "FinalStage" SSID is visible as an available WiFi network.
2018-10-18 11:44:06,306: INFO: This server should automatically be allocated the IP address: 192.168.4.2.
2018-10-18 11:44:06,306: INFO: If you have successfully connected to "FinalStage" and this is not the IP Address you were allocated, please ensure no other device has connected, and reboot your Sonoff.
2018-10-18 11:45:06,486: INFO: *** IMPORTANT! ***
2018-10-18 11:45:06,487: INFO: ** AFTER the first download is COMPLETE, with in a minute or so you should connect to the new SSID "FinalStage" to finish the process.
2018-10-18 11:45:06,487: INFO: ** ONLY disconnect when the new "FinalStage" SSID is visible as an available WiFi network.
2018-10-18 11:45:06,487: INFO: This server should automatically be allocated the IP address: 192.168.4.2.
2018-10-18 11:45:06,487: INFO: If you have successfully connected to "FinalStage" and this is not the IP Address you were allocated, please ensure no other device has connected, and reboot your Sonoff.
2018-10-18 11:45:19,971: INFO: Quitting.

So the code stops for waiting Sonoff to connect. I'm aware that the process is not working for my firmware versions. By dropping the ticket I'm just hoping to get informed if anything should change.

Thank you for the great work!

AHLJvanderPlas commented 5 years ago

Mac (10.14 Mojave) | Phyton Version 3.7.1 | Sonoff RF firmware 1.8.1 My Sonoff RF devices run on firmware version 1.8.1. I have the same problem. Final stage doesn't show. Stronger, the Sonoff keeps broadcasting it's ITEAD network. Happy to hear when a solution comes up.

debug_1540733164.log

zlldnv commented 5 years ago

Same logs!!! @mirko please help us!

sillyfrog commented 5 years ago

Please see the README/homepage

mirko / SonOTA

Bad luck with firmware versions #154