Open nobleEightfold opened 1 month ago
With the 1.10 linux firmware updater ("reflex-linux-x86_64" in https://github.com/misteraddons/Reflex-Adapt/releases/download/v1.10/reflex-v1.10.zip) - while waiting at the "Press the RESET button on your Reflex device." prompt after choosing a firmware, the program does not respond when the reset button is pressed on the device, and the firmware flash is unable to start. I tried different combos, none of which made a difference in this behavior.
However, I was able to use the 1.08 version and the reset button press is detected and the firmware flash completes successfully.
Yep, I need to figure out what happened with the last release. I've been using 1.09 release myself.
The new output mode firmware is all but done. Need to work on a release for it once my testers give feedback and bugs are fixed :)
https://cdn.discordapp.com/attachments/1082669321555279952/1261718542617673829/reflex-mpg-v0.1_2.zip
With the 1.10 linux firmware updater ("reflex-linux-x86_64" in https://github.com/misteraddons/Reflex-Adapt/releases/download/v1.10/reflex-v1.10.zip) - while waiting at the "Press the RESET button on your Reflex device." prompt after choosing a firmware, the program does not respond when the reset button is pressed on the device, and the firmware flash is unable to start. I tried different combos, none of which made a difference in this behavior.
However, I was able to use the 1.08 version and the reset button press is detected and the firmware flash completes successfully.