add urpmq for -r switch

[GoogleCodeExporter]

The .r switch does not show repository info for Mandriva or Mageia distros.  
The command to see active repositories and their url is:

urpmq --list-media active --list-url

Original issue reported on code.google.com by dennisg...@gmail.com on 4 Oct 2013 at 5:55

[GoogleCodeExporter]

This is not a bug or defect, but a request for enhanced -r support. Each 
upgrade system has to be built up manually based on datasets/samples from real 
systems. In this case, since I don't run either distro, I need full outputs 
from several diverse systems, with different repos used, etc, to construct the 
additional support for this repository output type.

The issue is accepted but changed from defect to enhancement, but requires 
attachments for each system, ie, run the command, as regular user, not root: 
urpmq --list-media active --list-url > system1.txt

then include that as an attachment. Do not paste in the output directly because 
I need to see all the actual white spaces etc for the output.

Once at least 3 sample files are received, ideally from different systems, with 
different repositories, that show the possible range the data can have in 
formatting/syntax, the enhancement can be added to inxi.

Original comment by inxi-...@techpatterns.com on 4 Oct 2013 at 7:42

• Changed state: Accepted
• Added labels: Priority-Low, Type-Enhancement
• Removed labels: Priority-Medium, Type-Defect

[GoogleCodeExporter]

obviously, change the file output name for each sample, like sample1.txt, 
sample2.txt, sample3.txt.

Also, if you can find different release versions of these distros and run the 
command on them to make sure the output has no variations, and if it does, so 
support for those can be added.

Original comment by inxi-...@techpatterns.com on 4 Oct 2013 at 7:45

[GoogleCodeExporter]

Here are the files you requested.  Four are from various releases of Mageia
and one is from an old (2011) version of Mandriva that I have in
virtualbox.  I does not look like the output of the urpmq command has
changed over time.  Each line of output has 2 parts; the repo name (which
can be more than one word) and the url to that repo.  The urls will start
with http:// ftp:// file:// or rsync://

*Dennis Griffin*
Grants Pass, Oregon
541-479-3079
541-450-0042 cell
dennisgrif@gmail.com
http://griffin.isa-geek.net

Original comment by dennisg...@gmail.com on 4 Oct 2013 at 10:00

[GoogleCodeExporter]

I'm not seeing any attached files, am I missing something somewhere?

Original comment by inxi-...@techpatterns.com on 5 Oct 2013 at 12:02

[GoogleCodeExporter]

I had sent them through gmail but I guess they never made it.  Hopefully this 
works.

Original comment by dennisg...@gmail.com on 5 Oct 2013 at 12:07

Attachments:

• system1.txt
• system2.txt
• system3.txt
• system4.txt
• system5.txt

[GoogleCodeExporter]

Nonfree Release (distrib11) 
http://mirrors.kernel.org/mageia/distrib/3/x86_64/media/nonfree/release

is the: (distrib11) part of that meaningful in terms of the repo information?

Original comment by inxi-...@techpatterns.com on 5 Oct 2013 at 12:14

[GoogleCodeExporter]

By the way, to be clear, the -r method doesn't care about the distro, only the 
package manager, so it checks a sequence of various package management systems 
if present, in this case, any distro that uses urpmq will get support when this 
is enabled.

Original comment by inxi-...@techpatterns.com on 5 Oct 2013 at 12:18

[GoogleCodeExporter]

It might be to some people but it is not to me. It is part of the medium name 
that is sometimes added by automated programs that can set up the repositories 
but I don't think it is really necessary.  If people set up the media using 
other tools, they can give them any name they want.

Original comment by dennisg...@gmail.com on 5 Oct 2013 at 12:27

[GoogleCodeExporter]

1.9.15 should now in theory support urpmq, unless there's something else wrong, 
like urpmq sending its output to stdout 2, error, which sometimes happens.

Once you show me some sample output from inxi -r after updating I'll mark this 
issue completed.

Original comment by inxi-...@techpatterns.com on 5 Oct 2013 at 1:42

[GoogleCodeExporter]

Looks Good!

Original comment by dennisg...@gmail.com on 5 Oct 2013 at 8:00

Attachments:

• inxi-r.png

[GoogleCodeExporter]

Ok, issue resolved, inxi enhancement added, checked, and works.

Original comment by inxi-...@techpatterns.com on 5 Oct 2013 at 6:09

• Changed state: Done

[GoogleCodeExporter]

I may have been too hasty when I said everything worked.  Apparently some tools 
to set up repos do not add the "file://" to the url when the repo is on the 
local filesystem.  A url with just a pathname such as 
/mnt/data/mirrors/mageia/distrib/cauldron/x86_64/media/core/release is also 
valid.  The new version of inxi does not show those repos.  Here is some 
discussion of the problem:

https://forums.mageia.org/en/viewtopic.php?f=41&t=6183&p=40580#p40580

Original comment by dennisg...@gmail.com on 6 Oct 2013 at 3:42

[GoogleCodeExporter]

inxi with this type of repo testedfor :// in the line, same as pisi, I added in 
space/ testing now, 1.9.16.

Hopefully that's it for possible syntaxes of output.

Original comment by inxi-...@techpatterns.com on 6 Oct 2013 at 6:12

[GoogleCodeExporter]

It works but it puts the "url" on the same line as the name.  That is different 
from the repos with "://".  See attached.

Original comment by dennisg...@gmail.com on 6 Oct 2013 at 6:24

Attachments:

• inxi-r1-v1.9.16.png

[GoogleCodeExporter]

{{{
inxi -r
Repos:     urpmq repo: Core Updates (private3)
           /mirror/Mageia/distrib/3/x86_64/media/core/updates
           urpmq repo: Core Release (private1)
           /mirror/Mageia/distrib/3/x86_64/media/core/release
           urpmq repo: Nonfree Release (private11)
           /mirror/Mageia/distrib/3/x86_64/media/nonfree/release
           urpmq repo: Nonfree Updates (private13)
           /mirror/Mageia/distrib/3/x86_64/media/nonfree/updates
           urpmq repo: Tainted Release (private21)
           /mirror/Mageia/distrib/3/x86_64/media/tainted/release
           urpmq repo: Tainted Updates (private23)
           /mirror/Mageia/distrib/3/x86_64/media/tainted/updates
           urpmq repo: Core 32bit Release (private31)
           /mirror/Mageia/distrib/3/i586/media/core/release
           urpmq repo: Core 32bit Updates (private33)
           /mirror/Mageia/distrib/3/i586/media/core/updates
           urpmq repo: chrome_x86_64
           http://dl.google.com/linux/chrome/rpm/stable/x86_64
           urpmq repo: google-earth
           http://dl.google.com/linux/earth/rpm/stable/x86_64
           urpmq repo: iscan
           ftp://192.168.0.2/pub/mirror/iscan
}}}

No version number change, it's fixed, I forgot to update the second regex that 
slices out the repo url/path

Original comment by inxi-...@techpatterns.com on 6 Oct 2013 at 6:56

[GoogleCodeExporter]

Great!  Thanks!

Original comment by dennisg...@gmail.com on 6 Oct 2013 at 7:00

[GoogleCodeExporter]

I tightened the regex slightly, no new version number, the last svn commit, ie, 
upgrade inxi now, will have it.

That avoids some possibly but highly unlikely scenarios with / type paths.

Original comment by inxi-...@techpatterns.com on 6 Oct 2013 at 7:16