search

mjilesen / com.toshiba

GNU General Public License v3.0
4 stars 3 forks source link

Cant control temperature in advanced flow after update 1.5.0/1.5.1 #33

Closed itzbolsi closed 1 year ago

itzbolsi commented 2 years ago

Hi, seems like update 1.5.0/1.5.1 broke something. I have an advanced flow which runs automatically and it stopped working once the update was installed.

Seems like it's stuck on trying to edit the temperature which for some reason fails.

Here is part of the flow:

image

and here it is with the error:

image
mjilesen commented 2 years ago

As in the release notes, I have renamed some capabilites and tried to fix this is the repair functionality. However, Homey cannot handle this and therefore (for the last time) you will need to re-install your device and fix your flows.

itzbolsi commented 2 years ago

Hi @mjilesen

I have re-added my heatpump now, but it seems like the flows dosent trigger by themself. If i manually test the flows they work. Here is one of the flows.

Screenshot 2022-10-13 at 07 13 46

Mvh Ole Henrik Simonsen

From: mjilesen @.> Sent: Thursday, October 6, 2022 15:42 To: mjilesen/com.toshiba @.> Cc: itzbolsi @.>; Author @.> Subject: Re: [mjilesen/com.toshiba] Cant control temperature in advanced flow after update 1.5.0/1.5.1 (Issue #33)

As in the release notes, I have renamed some capabilites and tried to fix this is the repair functionality. However, Homey cannot handle this and therefore (for the last time) you will need to re-install your device and fix your flows.

— Reply to this email directly, view it on GitHubhttps://github.com/mjilesen/com.toshiba/issues/33#issuecomment-1270074345, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOTUGOXBDKQM5VQTVTJ3JXDWB3JNTANCNFSM6AAAAAAQZ6DB3U. You are receiving this because you authored the thread.Message ID: @.***>

mjilesen commented 2 years ago

@itzbolsi can you add a screenprint of the flow that doesn't work?

itzbolsi commented 2 years ago
Screenshot 2022-10-18 at 16 39 49

Here is one example from today. The AC havent gone into cooling mode as it should (ref the picture of the flow) even though everything in the flow checks. Just tried to manually run it now and it switched to cooling mode immediately. This seems to happen randomly. Sometimes the flow works and sometimes not.

mjilesen commented 2 years ago

@itzbolsi Is the issue that one of the flow cards does not work or all of them? If it is just one of them, can you add a wait of 1 or 2 seconds after the ALL and before the "send changes to AC" and see it it still happens?

mjilesen commented 1 year ago

@itzbolsi no reply for some months, closed the issue