First of all: Thank you very much for PinballY. I appreciate your effort and commitment!
I have a 3 monitor setup. (1&2 for PF&BG). On the 3rd monitor i'm using the upper part for topper, the lower part for DMD. PinballYs topper & dmd windows do not stretch to the borders of the screen, but are inset by some pixels, because the bezel in front of the monitor covers some mm of it. Also, i leave a vertical gap of 20 pixels between the topper & dmd window because of the bezel. See the image.
I'm using PinballY only since roughly a week with my fresh (and first) VPin build. The first days, window positioning & TopperWindow.Maximized property worked flawless. Since 2 days, the topper window gets maximized when PinballY is started and covers the complete 3rd monitor (overlaying the DMD window). Same resizing happens to DMD window underneath the topper window.
I checked settings.txt and changed TopperWindow.Maximized back to zero and adjusted the window positions manually. But this did not help. Behavior is still as above. When i quit PinballY, the TopperWindow.Maximized property is set to 1 again.
I have disabled snapping & maximizing windows in Windows 10 while dragging, but that had no influence (anyway).
I also un-checked the option for checking if the windows are positioned in the visible area of the screens. No change.
As a side note: In the current state described above, the size of the DMD window cannot be changed by dragging the lower right corner. It's size is locked to the size of the 3rd monitors screen resolution. It can only be dragged around.
I'm also wondering why you can't enable the window borders on the DMD window but on all of the 3 other window types. Any reason for that?
First of all: Thank you very much for PinballY. I appreciate your effort and commitment! I have a 3 monitor setup. (1&2 for PF&BG). On the 3rd monitor i'm using the upper part for topper, the lower part for DMD. PinballYs topper & dmd windows do not stretch to the borders of the screen, but are inset by some pixels, because the bezel in front of the monitor covers some mm of it. Also, i leave a vertical gap of 20 pixels between the topper & dmd window because of the bezel. See the image.
I'm using PinballY only since roughly a week with my fresh (and first) VPin build. The first days, window positioning & TopperWindow.Maximized property worked flawless. Since 2 days, the topper window gets maximized when PinballY is started and covers the complete 3rd monitor (overlaying the DMD window). Same resizing happens to DMD window underneath the topper window.
I checked settings.txt and changed TopperWindow.Maximized back to zero and adjusted the window positions manually. But this did not help. Behavior is still as above. When i quit PinballY, the TopperWindow.Maximized property is set to 1 again.
I have disabled snapping & maximizing windows in Windows 10 while dragging, but that had no influence (anyway).
I also un-checked the option for checking if the windows are positioned in the visible area of the screens. No change.
As a side note: In the current state described above, the size of the DMD window cannot be changed by dragging the lower right corner. It's size is locked to the size of the 3rd monitors screen resolution. It can only be dragged around. I'm also wondering why you can't enable the window borders on the DMD window but on all of the 3 other window types. Any reason for that?