May need a little work if you want to use screws. The holes came out slightly too small for 3mm screws. I ended up just using zip ties to attach the controller.
Mount is made up of 2 pieces, an extender that provides some distance from the 2020 extrusion so the mount clears the x-axis motor.
And a thin mount for the RAMBo controller that connects to that extender.
Making this 2 pieces gives a few advantages:
The whole thing can be printed flat without any support material (any other orientation would require significant support material due to the nature of this mount.
The screws connecting the mount to the frame can be accessed without removing the controller from its frame.
The extender design can be re-used for any other mount as large as the RAMBo which cannot fit the way a RAMPS might.
May need a little work if you want to use screws. The holes came out slightly too small for 3mm screws. I ended up just using zip ties to attach the controller.
Mount is made up of 2 pieces, an extender that provides some distance from the 2020 extrusion so the mount clears the x-axis motor. And a thin mount for the RAMBo controller that connects to that extender.
Making this 2 pieces gives a few advantages:
Here's a picture of the mount in action: