wiring esp32 <-> ikea pcb

[hansgans007]

where can i find the connection between esp and ikea pcb ?

[hansgans007]

only 1 think on the mqtt motor_version it write

announce = awoke framework_version = Jan 11 2021-08:26:42 version = Jan 11 2021-08:26:42 motor_version = Not detected!

when i plug in the esp it drives up and then nothing more

[hansgans007]

Your terminal application does not support escape sequences. Line editing and history features are disabled. On Windows, try using Putty instead. ←[0;33mW (2748) fyrtur-esp32: Stack: 2188←[0m ←[0;31mE (2758) fyrtur-esp32: Temperature sensor not found!←[0m ←[0;32mI (2758) UART: Configuring motor unit UART..←[0m ←[0;32mI (2758) BLINDS: Running on core #1←[0m ←[0;32mI (2758) BLINDS_UART: Running on core #1←[0m ←[0;33mW (2758) BLINDS: blinds_task_read_status_reg - Stack: 2140←[0m ←[0;32mI (3768) BLINDS: Checking motor module...←[0m ←[0;33mW (3768) BLINDS: blinds_task_read_status_reg - Stack: 2028←[0m ←[0;31mE (8768) BLINDS: Fyrtur motor not connected!←[0m ←[0;32mI (8768) NODE-FRAMEWORK: [APP] Free memory: 254748 bytes←[0m ←[0;32mI (8768) NODE-FRAMEWORK: [APP] IDF version: v4.3-dev-1901-g178b122c1←[0m ←[0;32mI (8778) NODE-FRAMEWORK: Running on core #0←[0m ←[0;32mI (8778) NODE-FRAMEWORK: Using project/base name 'fyrtur-esp32'←[0m ←[0;32mI (8828) NODE-FRAMEWORK: NVS open OK←[0m Create led task.. ←[0;32mI (8838) wifi_manager: Set STA IP String to: 0.0.0.0←[0m ←[0;32mI (8838) LED: [LED] Running on core #1←[0m ←[0;32mI (8848) system_api: Base MAC address is not set←MQTT LED: stack: 1672←[0m ←[0;32mI (8848) system_api: read default base MAC address from EFUSE←[0m ←[0;32mI (8878) wifi_init: rx ba win: 6←[0m ←[0;32mI (8878) wifi_init: tcpip mbox: 32←[0m ←[0;32mI (8878) wifi_init: udp mbox: 6←[0m ←[0;32mI (8888) wifi_init: tcp mbox: 6←[0m ←[0;32mI (8898) wifi_init: tcp tx win: 5744←[0m ←[0;32mI (8898) wifi_init: tcp rx win: 5744←[0m ←[0;32mI (8898) wifi_init: tcp mss: 1440←[0m ←[0;32mI (8908) wifi_init: WiFi IRAM OP enabled←[0m ←[0;32mI (8908) wifi_init: WiFi RX IRAM OP enabled←[0m ←[0;32mI (8908) wifi_manager: AP SSID: fyrtur-esp32-7baf1c←[0m ←[0;32mI (9738) phy: phy_version: 4500, 0cd6843, Sep 17 2020, 15:37:07, 0, 0←MQTT wifi_manager: wifi_manager_event_handler Stack: 2700←[0m ←[0;32mI (9738) wifi_manager: WIFI_EVENT_STA_START←[0m ←[0;32mI (9738) http_server: Registering URI handlers←[0m ←[0;32mI (9758) wifi_manager: Set AP auto shutdown to enabled←MQTT wifi_manager: wifi_manager queue loop - free heap 191192, stack: 1180←[0m ←[0;32mI (9768) wifi_manager: MESSAGE: ORDER_LOAD_AND_RESTORE_STA←[0m ←[0;32mI (9768) wifi_manager: wifi_manager_fetch_wifi_sta_config: ssid:Altersheim E.V. password:syncm4st3r1sb3st←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: SoftAP_ssid:fyrtur-esp32-7baf1c←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: SoftAP_pwd:esp32pwd←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: SoftAP_channel:1←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: SoftAP_hidden (1 = yes):0←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: SoftAP_bandwidth (1 = 20MHz, 2 = 40MHz)1←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: sta_only (0 = APSTA, 1 = STA when connected):1←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: sta_power_save (1 = yes):0←MQTT wifi_manager: wifi_manager_fetch_wifi_settings: sta_static_ip (0 = dhcp client, 1 = static ip):0←[0m ←[0;32mI (9848) wifi_manager: Saved wifi found on startup. Will attempt to connect.←MQTT wifi_manager: wifi_manager queue loop - free heap 191108, stack: 1180←[0m ←[0;32mI (9858) wifi_manager: MESSAGE: ORDER_CONNECT_STA←[0m ←[0;32mI (9768) NODE-FRAMEWORK: Publishing as fyrtur-esp32-7baf1c←[0m ←[0;32mI (9878) mqtt_manager: MQTT manager start←MQTT mqtt_manager: mqtt_manager_do_fetch_config: URI:'mqtt://192.168.178.34:1883' username:'' password:'' auto-reconnect: 1←[0m ←[0;32mI (9888) mqtt_manager: mqtt_manager_fetch_config: URI:'mqtt://192.168.178.34:1883' username:'' password:'' auto-reconnect: 1←[0m ←[0;32mI (9898) mqtt_manager: MQTT config reloaded succesfully. Starting AP temporarily...←[0m ←[0;32mI (9908) wifi_manager: Set AP auto shutdown to enabled←MQTT wifi_manager: wifi_manager queue loop - free heap 190668, stack: 1180←[0m ←[0;32mI (9928) wifi_manager: MESSAGE: ORDER_START_AP←[0m ←[0;32mI (9918) mqtt_manager: Create MQTT manager task..←MQTT wifi_manager: wifi_manager_event_handler Stack: 1084←[0m ←[0;32mI (9938) wifi_manager: WIFI_EVENT_AP_START←MQTT LED: queue rcv stack: 1672←[0m ←[0;32mI (9938) mqtt_manager: [MQTT] Running on core #1←[0m ←[0;32mI (9948) LED: led 0 : 0 0 30 (1000 ms)←[0m ←[0;32mI (9938) fyrtur-esp32: Setting verbose motor MQTT diagnostics to 0←[0m esp32> ←[0;32mI (10028) http_server: Registering URI handlers←[0m ←[0;32mI (10028) dns_server: DNS server listening on address: 10.10.0.1←[0m ←[0;32mI (10028) dns_server: DNS Server listening on 53/udp←[0m D (11538) wifi_manager: wifi_manager_event_handler Stack: 1084←[0m ←[0;32mI (11538) wifi_manager: WIFI_EVENT_STA_CONNECTED←[0m ←[0;32mI (11538) mqtt_manager: WIFI_EVENT_STA_CONNECTED←[0m ←[0;33mW (11548) mqtt_manager: Heap: 173092←[0m D (11558) mqtt_manager: loop - stack: 1556←[0m ←[0;32mI (13338) esp_netif_handlers: sta ip: 192.168.178.205, mask: 255.255.255.0, gw: 192.168.178.1←[0m D (13338) wifi_manager: wifi_manager_event_handler Stack: 1004←[0m ←[0;32mI (13348) wifi_manager: IP_EVENT_STA_GOT_IP←[0m ←[0;32mI (13348) mqtt_manager: IP_EVENT_STA_GOT_IP←[0m D (13348) wifi_manager: wifi_manager queue loop - free heap 173044, stack: 1180←[0m ←[0;33mW (13348) mqtt_manager: Heap: 172984←[0m D (13358) mqtt_manager: loop - stack: 1556←[0m ←[0;32mI (13358) wifi_manager: WM_EVENT_STA_GOT_IP←[0m ←[0;33mW (13378) mqtt_manager: Heap: 172984←[0m ←[0;32mI (13378) mqtt_manager: Connecting to the MQTT server (mqtt://192.168.178.34:1883) (reconnect=1)..←[0m ←[0;32mI (13378) wifi_manager: Set STA IP String to: 192.168.178.205←[0m ←[0;32mI (13388) mqtt_manager: json {"uri":"mqtt://192.168.178.34:1883","urc":1, "error":""} ←[0m ←[0;32mI (13398) wifi_manager: Start AP shutdown timer...←[0m ←[0;33mW (13398) mqtt_manager: Heap: 171072←[0m ←[0;32mI (13408) mqtt_manager: Starting MQTT client ..←[0m D (13418) LED: queue rcv stack: 1672←[0m D (13418) mqtt_manager: loop - stack: 1508←[0m ←[0;32mI (13428) LED: led 0 : 30 0 30 (50 ms)←[0m D (13418) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=7←[0m D (13458) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=1←[0m ←[0;32mI (13458) mqtt_manager: MQTT_EVENT_CONNECTED←[0m ←[0;33mW (13458) mqtt_manager: Heap: 163724←[0m ←[0;32mI (13478) NODE-FRAMEWORK: MQTT_EVENT_CONNECTED←[0m ←[0;33mW (13478) mqtt_manager: Heap: 163912←[0m ←[0;33mW (13478) NODE-FRAMEWORK: [EVENT] Stack: 3352 heap: 163828←[0m ←[0;32mI (13488) mqtt_manager: Subscribe to /home/control/all/#←[0m ←[0;32mI (13488) mqtt_manager: MQTT server connected!←[0m ←[0;32mI (13498) mqtt_manager: json {"uri":"mqtt://192.168.178.34:1883","urc":2, "error":""} ←[0m ←[0;32mI (13498) mqtt_manager: Subscribe to /home/control/fyrtur-esp32/#←[0m ←[0;32mI (13518) mqtt_manager: Subscribe to /home/control/fyrtur-esp32-7baf1c/#←[0m ←[0;32mI (13518) NODE-FRAMEWORK: Publish: /home/node/fyrtur-esp32-7baf1c/announce : awoke←[0m ←[0;32mI (13528) NODE-FRAMEWORK: Publish: /home/node/fyrtur-esp32-7baf1c/framework_version : Jan 11 2021-08:26:42←[0m D (13538) mqtt_manager: mqtt_manager_do_fetch_config: URI:'mqtt://192.168.178.34:1883' username:'' password:'' auto-reconnect: 1←[0;32mI (13538) NODE-FRAMEWORK: Publish: /home/cover/fyrtur-esp32-7baf1c/config : { "name": "fyrtur-esp32-7baf1c", "uniq←[0m ue_id": "fyrtur-esp32-7baf1c", "device_class": "blind", "command_topic": "/home/control/fyrtur-esp32-7baf1c/command", "position_topic": "/home/cover/fyrtur-esp32-7baf1c/position", "set_position_topic": "/home/control/fyrtur-esp32-7baf1c/setD (13538) LED: queue rcv stack: 1672←[0m /target_position", "position_open": 1000 }←[0m ←[0;32mI (13568) mqtt_manager: MQTT config was not saved to flash because no change has been detected.←[0m ←[0;32mI (13588) NODE-FRAMEWORK: Publish: /home/node/fyrtur-esp32-7baf1c/version : Jan 11 2021-08:26:42←[0m ←[0;32mI (13588) LED: led 0 : 30 0 30 (2000 ms)←[0m ←[0;32mI (13598) wifi_manager: Set AP auto shutdown to enabled←[0m ←[0;32mI (13618) NODE-FRAMEWORK: Publish: /home/node/fyrtur-esp32-7baf1c/motor_version : Not detected!←[0m ←[0;32mI (13628) wifi_manager: Start AP shutdown timer...←[0m D (13638) mqtt_manager: loop - stack: 628←[0m ←[0;32mI (13638) mqtt_manager: Subscribe to /home/control/fyrtur-blinds/#←[0m D (13658) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=3←[0m ←[0;32mI (13658) mqtt_manager: MQTT_EVENT_SUBSCRIBED, msg_id=54508←[0m D (13678) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=3←[0m ←[0;32mI (13678) mqtt_manager: MQTT_EVENT_SUBSCRIBED, msg_id=16068←[0m D (13688) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=3←[0m ←[0;32mI (13688) mqtt_manager: MQTT_EVENT_SUBSCRIBED, msg_id=11200←[0m D (13708) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=3←[0m ←[0;32mI (13708) mqtt_manager: MQTT_EVENT_SUBSCRIBED, msg_id=3197←[0m

[hansgans007]

ANDLE MSG: control:command : open

←[0;31mE (113948) fyrtur-esp32: command: invalid cmd!←[0m D (113958) LED: queue rcv stack: 1672←[0m ←[0;32mI (113958) LED: led 0 : 30 0 30 (100 ms)←[0m D (120778) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=6←[0m ←[0;32mI (120778) NODE-FRAMEWORK: MQTT_EVENT_DATA←[0m TOPIC=/home/control/fyrtur-esp32-7baf1c/command DATA=OPEN

HANDLE MSG: control:command : OPEN

←[0;31mE (120788) fyrtur-esp32: command: invalid cmd!←[0m D (120808) LED: queue rcv stack: 1672←[0m ←[0;32mI (120808) LED: led 0 : 30 0 30 (100 ms)←[0m D (122148) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=6←[0m ←[0;32mI (122148) NODE-FRAMEWORK: MQTT_EVENT_DATA←[0m TOPIC=/home/control/fyrtur-esp32-7baf1c/command DATA=OPEN

HANDLE MSG: control:command : OPEN

←[0;31mE (122158) fyrtur-esp32: command: invalid cmd!←[0m D (122178) LED: queue rcv stack: 1672←[0m ←[0;32mI (122178) LED: led 0 : 30 0 30 (100 ms)←[0m

[hansgans007]

D (98568) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=6 I (98568) NODE-FRAMEWORK: MQTT_EVENT_DATA TOPIC=/home/control/fyrtur-esp32-7baf1c/command DATA=OPEN HANDLE MSG: control:command : OPEN D (98588) LED: queue rcv stack: 1672 I (98588) LED: led 0 : 30 0 30 (100 ms) W (98588) BLINDS: queue - Stack: 1688 I (98598) BLINDS: Move (direction Up, revs 0.00, force_small_steps-flag 0, override_limits: 0 I (98608) blinds_task_move: Move: Up - 0.00 revs, target -1.00, force_small_steps 0, force_mov 0 I (98618) blinds_task_move: Starting continuous movement E (98628) BLINDS: Already up! D (109848) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, event_id=6 I (109858) NODE-FRAMEWORK: MQTT_EVENT_DATA TOPIC=/home/control/fyrtur-esp32-7baf1c/command DATA=CLOSE HANDLE MSG: control:command : CLOSE D (109868) LED: queue rcv stack: 1672 I (109868) LED: led 0 : 30 0 30 (100 ms) W (109868) BLINDS: queue - Stack: 1528 I (109878) BLINDS: Move (direction Down, revs 0.00, force_small_steps-flag 0, override_limits: 0 I (109888) blinds_task_move: Move: Down - 0.00 revs, target -1.00, force_small_steps 0, force_mov 0 I (109908) blinds_task_move: Starting continuous movement I (109908) NODE-FRAMEWORK: Publish: /home/cover/fyrtur-esp32-7baf1c/status : Moving I (109918) NODE-FRAMEWORK: Publish: /home/cover/fyrtur-esp32-7baf1c/direction : Down I (109918) NODE-FRAMEWORK: Publish: /home/cover/fyrtur-esp32-7baf1c/target_position : 0 W (109938) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (110458) BLINDS: blinds_task_read_status_reg - Stack: 1400

W (199218) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (199738) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (200258) BLINDS: blinds_task_read_status_reg - Stack: 1400 D (200288) mqtt_manager: Event dispatched from event loop base=MQTT_EVENTS, even t_id=6 I (200288) NODE-FRAMEWORK: MQTT_EVENT_DATA TOPIC=/home/control/fyrtur-esp32-7baf1c/command DATA=STOP HANDLE MSG: control:command : STOP D (200308) LED: queue rcv stack: 1672 I (200308) LED: led 0 : 30 0 30 (100 ms) W (200308) BLINDS: queue - Stack: 1400 I (200318) BLINDS: Stop W (200778) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (201298) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (201818) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (202338) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (202858) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (203378) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (203898) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (204418) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (204938) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (205458) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (205978) BLINDS: blinds_task_read_status_reg - Stack: 1400 W (206498) BLINDS: blinds_task_read_status_reg - Stack: 1400

the motor not doing anything

[hansgans007]

W (48748) BLINDS: queue - Stack: 2216 E (48758) BLINDS: Setting minimum voltage not supported on original firmware!

[hansgans007]

okay connection between motor and esp its ok

RX PIN 5 TX PIN 23 LED PIN 18 BUTTON UP PIN 21 BUTTON DOWN 22

[hansgans007]

now it works the motor tries to move but it end in error

i use the 5V USB from charger

[hansgans007]

with the batterie it works

5V its too low

[sauer-m]

where can i find the connection between esp and ikea pcb ?

Same question here. Did I miss something?

[hansgans007]

RX PIN 5 TX PIN 23 LED PIN 18 BUTTON UP PIN 21 BUTTON DOWN 22

[sauer-m]

Thanks, I thought you mean the connection between custom PCB and motor in your previous post. Now its clear :)

[JB-BYS]

anybody has a schem of these pin, i'm a little bit confused of where to weld them thanks :)